Abstract:Purpose The purpose of this paper is to design and validate an electronic nose (E-nose) prototype using commercially available metal oxide gas sensors (MOX). This prototype has a sensor array board that integrates eight different MOX gas sensors to handle multi-purpose applications. The number of sensors can be adapted to match different requirements and classification cases. The paper presents the validation of this E-nose prototype when used to identify three gas samples, namely, alcohol, butane and cigarette smoke. At the same time, it discusses the discriminative abilities of the prototype for the identification of alcohol, acetone and a mixture of them. In this respect, the selection of the appropriate type and number of gas sensors, as well as obtaining excellent discriminative abilities with a miniaturized design and minimal computation time, are all drivers for such implementation. Design/methodology/approach The suggested prototype contains two main parts: hardware (low-cost components) and software (Machine Learning). An interconnection printed circuit board, a Raspberry Pi and a sensor chamber with the sensor array board make up the first part. Eight sensors were put to the test to see how effective and feasible they were for the classification task at hand, and then the bare minimum of sensors was chosen. The second part consists of machine learning algorithms designed to ensure data acquisition and processing. These algorithms include feature extraction, dimensionality reduction and classification. To perform the classification task, two features taken from the sensors' transient response were used. Findings Results reveal that the system presents high discriminative ability. The K-nearest neighbor (KNN) and support vector machine radial basis function based (SVM-RBF) classifiers both achieved 97.81% and 98.44% mean accuracy, respectively. These results were obtained after data dimensionality reduction using linear discriminant analysis, which is more effective in terms of discrimination power than principal component analysis. A repeated stratified K-cross validation was used to train and test five different machine learning classifiers. The classifiers were each tested on sets of data to determine their accuracy. The SVM-RBF model had high, stable and consistent accuracy over many repeats and different data splits. The total execution time for detection and identification is about 10 s. Originality/value Using information extracted from transient response of the sensors, the system proved to be able to accurately classify the gas types only in three out of the eight MQ-X gas sensors. The training and validation results of the SVM-RBF classifier show a good bias-variance trade-off. This proves that the two transient features are sufficiently efficient for this classification purpose. Moreover, all data processing tasks are performed by the Raspberry Pi, which shows real-time data processing with miniaturized architecture and low prices.

Detection of deltamethrin remains in mint with an electronic device coupled to chemometric methods

A Hybrid Wireless Electrodeless QCM-D for the Discrimination of Volatile Organic Compounds

Portable spectroscopy, digital imaging colorimetry and multivariate statistical tools in contaminant identification: A case study of mint (Mentha) and basil (Ocimum basilicum)

Classification and Identification of Essential Oils from Herbs and Fruits Based on a MOS Electronic-Nose Technology

Discrimination of Wood Borers Infested Platycladus Orientalis Trunks Using Quartz Crystal Microbalance Gas Sensor Array

Electronic Nose and Data Analysis for Detection of Maize Oil Adulteration in Sesame Oil

Discrimination among Tea Plants Either with Different Invasive Severities or Different Invasive Times Using MOS Electronic Nose Combined with a New Feature Extraction Method

Discrimination of Different Types Damage of Tomato Seedling by Electronic Nose

Determining the potato samples processed manner with an electronic nose system supported by a machine-learning approach

Selective and sensitive molecularly imprinted polymer-based electrochemical sensor for detection of deltamethrin

Potentiometry lipid membrane based electronic tongue for the classification of mint in tea by principal component analysis (PCA) and linear discrimination analysis (LDA)

Detection of mealybug infestation on the Khasi Mandarin orange plant using electronic nose

A Temporal Filter to Extract Doped Conducting Polymer Information Features from an Electronic Nose

The design and validation of a fast and low-cost multi-purpose electronic nose for rapid gas identification

Classification of Two Volatiles Using an eNose Composed by an Array of 16 Single-Type Miniature Micro-Machined Metal-Oxide Gas Sensors

Wastewater monitoring by means of e-nose, VE-tongue, TD-GC-MS, and SPME-GC-MS

Internet-of-Things-integrated Molecularly Imprinted Polymer-based Electrochemical Nano-sensors for Pesticide Detection in the environment and food products

Wireless E-Nose Sensors to Detect Volatile Organic Gases through Multivariate Analysis

Performance Analysis of MAU-9 Electronic-Nose MOS Sensor Array Components and ANN Classification Methods for Discrimination of Herb and Fruit Essential Oils

Rapid Quantitative Detection of Deltamethrin in <i>Corydalis yanhusuo</i> by SERS Coupled with Multi-Walled Carbon Nanotubes