Abstract:Superhydrophobic membrane is favorable for the membrane distillation technology in desalination applications although the theoretic reasons are still unsettled. In this study, some novel theories were first proposed to establish the bridges between the surface parameters (including water contact angle and surface roughness) and the heat and mass transfer process. Based on the hydrophobic PVDF membrane (with a water contact angle of 124°), a kind of superhydrophobic PVDF membrane with water contact angle of 162° was prepared through the surface modification. Then both membranes were tested in the VMD process, and simulation models based on both kind of membranes were constructed to compare the membrane performances and the heat and mass transfer characteristics. The results show that the slip flow exists on the superhydrophobic surface, and the superhydrophobic membrane has higher permeate flux than the original PVDF membrane. The insight investigations show that the heat transfer resistance (HTR) of the VMD process is focused on the membrane layers, and the variation of water contact angle or roughness has little influence on the heat transfer coefficient of the membrane layers. However, when the water contact angle varies from 124° to 165°, the total HTR value decreases from 3.156 × 10-3 (m2 K)/W to 2.599 × 10-3 (m2 K)/W, which indicates that the feed side HTR value is largely decreased by the superhydrophobic surface. The further polarization investigations found that the temperature polarization coefficient (TPC) changes slightly when the membrane contact angle varies from 124° to 165°. Instead, the concentration polarization coefficient (CPC) decreases from 0.1455 to 0.0071. The vapor polarization coefficient (VPC), comprehensively considered the influences of TPC and CPC, has a value of above 0.96 when the water contact angle is higher than 155°, which indicates that the performance of the superhydrophobic membrane is not limited by the polarization problems.

Heat and Mass Transfer Characteristics of Vacuum Membrane Distillation Solution Regeneration Based on Hollow Fiber Membrane

Conjugate heat and mass transfer in vacuum membrane distillation for solution regeneration using hollow fiber membranes

Mass transfer in hollow fiber vacuum membrane distillation process based on membrane structure

A Method for Experimental Determination of Mass Transfer Resistance Across Membrane in Vmd

Investigation of Shell Side Heat Transfer in Cross-Flow Designed Vacuum Membrane Distillation Module

Thermodynamic Optimization of a Vacuum Multi-Effect Membrane Distillation System for Liquid Desiccant Regeneration

Novel Membrane and Device for Vacuum Membrane Distillation-Based Desalination Process

A MEMBRANE DISTILLATION REGENERATOR IN LIQUID DESICCANT DEHUMIDIFICATION SYSTEM

Numerical Simulation of 3D Hollow-Fiber Vacuum Membrane Distillation by Computational Fluid Dynamics

Study on the Heat and Mass Transfer in Ultrasonic Assisting Vacuum Membrane Distillation

Progress in Research on Transfer Mechanism in Membrane Distillation (Ⅲ) Vacuum Membrane Distillation

Numerical Simulation Study on the Mass and Heat Transfer in the Self-Heating Membrane Distillation Process

Optimization of hollow fiber membrane module for vacuum membrane distillation (VMD) via experimental study

Simulation and Experiment on Direct Contact Membrane Distillation Regenerator in the Liquid Dehumidification Air-Conditioning System

Heat and mass transfer model for desiccant solution regeneration process in liquid desiccant dehumidification system

Superhydrophobic-slip surface based heat and mass transfer mechanism in vacuum membrane distillation

Performance analysis of solar vacuum membrane distillation regeneration

Numerical investigation on mass and heat transfer performance for novel vacuum membrane distillation modules enhanced by semicircular spacers

Simulation and Experimental Investigation of the Vacuum-Enhanced Direct Membrane Distillation Driven by a Low-Grade Heat Source

Numerical Simulation of Cross-Flow Vacuum Membrane Distillation and Characteristics Analysis

Computational fluid dynamics based numerical simulations of heat transfer, fluid flow and mass transfer in vacuum membrane distillation process