Abstract:Alkaline water electrolysis has been operated on 100+ MW scale in the 20 th century powered by hydropower. Because of this history, the technology is often regarded as a mature technology with limited improvement potential that is less suitable for flexible operation. As a result most research efforts in the field of water electrolysis focus on other technologies such as PEM, solid oxide and AEM electrolysis. This is a pity, since alkaline electrolysis is very well positioned to be deployed on large-scale for the production of green hydrogen in the coming decades. Main reason is that in contrast to the other technologies, alkaline technology does not depend on scarce and/or expensive noble or rare earth metals. Also, the use of a diaphragm instead of a membrane makes the technology more robust. Yet, to enable the large-scale deployment of alkaline electrolysis for production of green hydrogen from renewable electricity certain technical challenges need to be overcome. These include safety challenges associated with rare scenarios where hydrogen and oxygen can mix, flexibility limitations associated with gas crossover limiting the minimum load of the plant, and durability challenges resulting from frequent shutdowns of electrolyzers. In principle all these challenges can be overcome by rigorous plant design and the selection of suitable diaphragm and electrode materials, but they do require research efforts. Next to that, there is room to significantly drive down the costs of green hydrogen produced by alkaline electrolyzers. Traditionally, alkaline electrolyzers have been operated at low current densities of 0.2-0.4 A cm -2 . This was related to the high ohmic drop associated with the use of thick diaphragms and non-zero-gap cell designs. Presently, advanced alkaline electrolyzers are under development that can operate at significantly higher current densities (~1 A cm -2 ) through the use of thinner diaphragms, zero-gap cell designs and improved electrode materials. Operation at these increased current densities increases the output of alkaline electrolyzers and in this way can effectively reduce the costs and footprint of water electrolysis plants. Yet, the use of thinner diaphragms and advanced electrodes also creates new challenges, since they can lead to increased gas crossover and vulnerability to impurities and reverse currents that occur upon the shutdown of electrolyzers. In this presentation the fundamentals of alkaline water electrolysis will be discussed. These include overpotentials and durability of electrode coatings, the role of electrolyte impurities, ohmic resistance, gas crossover through the diaphragm, the influence of operating temperature and pressure, the effect of bubbles, and the influence stray currents resulting from the manifold design. These fundamentals will be translated into a potential design for the perfect alkaline electrolyzer. Figure:alkaline electrolyzers operational in Norway in 1931. Source: Norsk Industriarbeidermuseum Figure 1

Affordable Green Hydrogen from Alkaline Water Electrolysis: Key Research Needs from an Industrial Perspective

Alkaline Water Electrolysis for Green Hydrogen Production

Clean and Affordable Hydrogen Fuel from Alkaline Water Splitting: Past, Recent Progress, and Future Prospects

(Invited) Challenges and Opportunities of Alkaline Water Electrolysis

(Invited) Manufacturing Challenges, Opportunities, And Successes for PEM Electrolysis at Scale

Green hydrogen production by photovoltaic-assisted alkaline water electrolysis: A review on the conceptualization and advancements

A review of recent advances in alkaline electrolyzer for green hydrogen production: Performance improvement and applications

Racing for Green Hydrogen Economics with Polymer Electrolyte Water Electrolysis – How to Be Achieved

Cost Projection of Global Green Hydrogen Production Scenarios

Green Hydrogen Production by Water Electrolysis: Current Status and Challenges

(Invited) Perspectives of Advanced Electrolysis for Green Chemicals Manufacturing

Large-scale hydrogen production via water electrolysis—a techno-economic and environmental assessment

(Invited) Green Hydrogen Technologies: Status and Trends

The Optimization of a Physical Factor of Hydrogen Production in Alkaline Water Electrolysis

Advancing strategies on green H2 production via water electrocatalysis: bridging the benchtop research with industrial scale-up

Recent Developments on Hydrogen Production Technologies: State-of-the-Art Review with a Focus on Green-Electrolysis

(Invited) Water Electrolyzers for Green Hydrogen Production - a Tutorial on Catalyst and Electrode Development for Next Generation Devices

Alkaline Electrolysis for Hydrogen Production at Sea: Perspectives on Economic Performance

An overview of water electrolysis technologies for green hydrogen production

Benchmark and Roadmap for Low Temperature Water Electrolysis for Green H2 Production and Applications

Prospects for hydrogen production by water electrolysis to be competitive with conventional methods