Abstract:Introduction High-resolution seismic reflection has been successfully used to delineate preferential pathways within groundwater systems that represent corridors for contaminant movement in a wide variety of challenging hydrologic settings, many in settings where other methods and/or monitor wells have not been enlightening. For more than four decades, seismic reflection has found utility addressing near-surface groundwater problems where lateral variability of confining layers have inhibited even the most sophisticated flow models developed from monitor wells (Shepers, 1975). Optimizing acquisition and processing parameters while limiting interprettations to only what can be validated on shot records and consistent with wave propagation and reflection theory is essential for making meaningful and reliable contributions to a groundwater flow model and associated monitoring and remediation programs (Steeples and Miller, 1990). Years of application of the method in a wide range of settings and with a diverse set of imaging objectives has resulted in an excellent collection of case studies that provides guidance for current and future applications and developments as well as evaluations of method feasibility. The seismic reflection method has been used to establish lateral continuity in confining units with thick dry sandy overburdens as well as fine-grained unconsolidated and saturated near-surface settings. Mapping bedrock is an important application where percolation rates in the vadose zone are high and bedrock units are impermeable. Seismic reflection is a viable tool for studying sitewide variability in unconsolidated alluvial sediments where complex vertical migration paths can allow contaminants to easily move between local “confining” layers, leaving zones directly beneath a source contaminant free, while deeper layers, seemingly protected by several aquicludes, are rich in contaminant. The complexity of many depositional settings results in rapid vertical changes in material properties and therefore a need for high-resolution imaging that does not require a priori information or assumptions about the sequential nature of the vertical property changes. Even with seismic reflection’s many positive and sometimes amazing attributes and capabilities, it is imperative that an awareness of the method’s limitations and true potential in real-world settings be maintained. Near-surface seismic methods do not lend themselves to distinguishing different types of liquids within a groundwater system. For example, distinguishing DNAPLs or LNAPLs from within a saturated interval is beyond the resolution of the seismic tool in real-world settings. However, interrogation of the subsurface in search of lithologies or structures that might represent traps for contaminants has proven very effective. In fact, based on the properties of liquids in the subsurface, it is many times possible to infer traps and likely areas of high concentrations based on mapped reflector structures in conjunction with well control.

High-resolution reflection seismic imaging to reveal subsurface geological structures of a deep geothermal reservoir

Application Study Of 3d Seismic Survey In Engineering Investigation

A Study on the Acquisition Technology for Weak Seismic Signals from Deep Geothermal Reservoirs

Near-Surface Geothermal Reservoir Imaging based on the Customized Dense Seismic Network

High-Resolution Ambient Noise Imaging of Geothermal Reservoir Using 3C Dense Seismic Nodal Array and Ultra-Short Observation

High-resolution Microseismic Imaging

Seismic Imaging for the Geothermal Resources with Dense Seismic Array and Passive Sources

A Study on Modeling a Deep Sand Geothermal Field in South China

DAS microseismic reflection imaging for hydraulic fracture and fault lineament characterization

3-D Joint Inversion of MT and CSEM Data for Imaging a High-Temperature Geothermal System in Yanggao Region, Shanxi Province, China

Research progress on seismic imaging technology

Advanced 3D geophysical imaging technologies for geothermal resource characterization

High-resolution seismic reflection to image hydrogeologic sequences

Seismic Characterization of the Blue Mountain Geothermal Field

Application of integrated geophysical methods in geothermal exploration: a case in Zhangjiakou

Locating geothermal resources using seismic exploration in Xian county, China

Imaging Hydraulic Fractures by Microseismic Migration for Downhole Monitoring System

Near-Surface Radial Anisotropy Tomography of Geothermal Reservoir Using Dense Seismic Nodal Array

Investigation on the characteristics of hydraulic fracturing in fractured-subsequently-filled hot dry rock geothermal formation

A novel high-resolution imaging method based on sparsity in the time domain and spectral fitting in the frequency domain

Crosswell Seismic Imaging Using Q-Compensated Viscoelastic Reverse Time Migration with Explicit Stabilization