Application of nitritation from ammonium nitrogen rich wastewater using sequencing batch reactor process

Jiyeol Im,Kyungik Gil
DOI: https://doi.org/10.5004/dwt.2022.28771
IF: 1.1
2022-01-01
Desalination and Water Treatment
Abstract:Recycle water containing high-load nitrogen returns to the main stream of a municipal wastewater treatment plant (MWTP) and causes increase of the nitrogen load in the main process. This study has evaluated economic, eco-friendly and energy-saving nitrogen process that uses nitritation in a sequencing batch reactor (SBR). The range of nitrogen removal efficiency was 70%–99%, and nitrite conversion efficiency was 0.5%–92.4% in a laboratory-scale SBR during overall operation days. The ammonium nitrogen removal efficiency was maintained at over 70% with various retention time conditions, but the nitrite conversion efficiency varied depending on the hydraulic retention time. Nitritation occurred at a short solids retention time (in case of this study it is 1 d) through the nitrite oxidizing bacteria washout in this SBR. The maximum ammonium nitrogen removal rate was 0.544 kg Nremoved/(m3 d), and the nitrite conversion rate was 0.49 kg Nremoved/ (m3 d). Stable nitritation occurred at the influent ammonium nitrogen load ranging from 0.42 to 0.6 kg N/(m3 d), which was similar or even higher compared with other nitrogen treatment processes that use nitritation. For the application of nitritation to recycle water treatment (RWT) process in MWTP, nitrite build-up is an important factor to be considered in the selection of an appropriate treatment process. According to the results, an SBR is suggested as a method to increase the applicability of nitritation to RWT process in MWTP.
engineering, chemical,water resources
What problem does this paper attempt to address?