Abstract:A building may be subjected to a variety of accidental loads during its service life. Partially precast concrete (PC) beams are a primary structural component. Their impact resistance can have a substantial impact on the overall safety of a structure when it is subjected to an impact load. In this study, numerical analyses were performed on the dynamic response of PC beams strengthened with bonded steel plates subjected to impact loading. The model was verified from four aspects: energy conversion, failure form, impact force–time history curve, and midspan displacement–time history curve. The dynamic response eigenvalues of the peak impact force, peak midspan displacement, and residual midspan displacement were compared between the numerical simulations and experimental tests. The relative inaccuracy of the peak impact force ranged from 9.51% to 14.0%, with an average value of 11.9%. The average relative error for the midspan displacement was −0.09%, with the greatest relative errors varying between −0.64% and 0.3%. The residual value errors of the midspan displacement ranged from −0.95% to 2.38%, with an average relative error of 0.94%. On this basis, the effects of the impact mass, impact height, width, and length of the bonded steel plate on the impact resistance of the components were evaluated. Furthermore, the differences in the equivalent plastic strain contours, impact force–time history curves, and midspan displacement–time history curves under different parameters were compared. The results demonstrated that the failure modes and flexural deformations of the test beams were influenced by the impact mass and impact height. The increase in the length and width of the steel plate had no effect on the impact force response, but the peak and residual values of the midspan displacement decreased, which could significantly increase the impact resistance of the beams. Lastly, the impact mass m, the impact height h, the thickness t of the bonded steel plate, the length of the bonded steel plate hs, and the width of the bonded steel plate bs were all taken into account in the fitting formula. These five parameters were used to predict the peak impact force response, the peak value of the midspan displacement, and the residual value of the midspan displacement. The results demonstrated that the fitting formula had small errors and could accurately reflect the dynamic responses of the PC beams strengthened with bonded steel plates under impact loading.

High-strength steel beams with hexagonal web openings under impact load

Impact behavior of high-strength steel beam with different web opening forms

Impact behavior of high-strength steel beam with circular web openings

Impact resistance performance and simplified calculation method of web-opened steel beams under impact loads

Shear resistance performance of web-opening high-strength steel beams under impact loads

Impact resistance and damage assessment of steel beams with different web openings

Experimental and Analytical Study on Local Buckling Behavior of High Strength Steel Welded I-Section Beams

Experimental and numerical studies on UHPC-filled Q690 high-strength steel tubular members subjected to axial impact

Experimental and numerical investigation on impact and post-impact behaviours of H-shaped steel members

Numerical and Analytical Investigations of the Impact Resistance of Partially Precast Concrete Beams Strengthened with Bonded Steel Plates

Experimental and numerical study on the impact performance of concrete-filled high-strength steel tube (CFHSST)

Experimental and numerical investigation on flexural-torsional buckling of Q460 steel beams

Experimental study of an innovative steel-concrete composite beam under hogging moment

INVESTIGATIONS ON THE BEHAVIOR OF HIGH STRENGTH STEEL CONNECTIONS WITH GRADE 12.9 BOLTS

Postbuckling Resistance of High Strength Steel Welded I-section Beams Based on Interactive Slenderness

Numerical Study and Design Method for Lateral Torsional Buckling of High-Strength Steel Beams

Low temperature impact toughness of high strength structural steel

Behaviour of a novel stiffener-enhanced steel–concrete–steel sandwich beam subjected to impact loading

Hysteretic performance of thin-walled Q690 high-strength steel H-section beam-columns bent about the weak-axis

Balanced Design Philosophy of Superior High-Performance Steel Cover-Plated Beam-to-column Joints

Shear performance of partially encased composite beams with high-strength steel and UHPC