Abstract:Robots with transformable tracked mechanisms are widely used in complex terrains because of their high adaptability, and many studies on novel locomotion mechanisms have been conducted to make them able to climb higher obstacles. Developing underactuated transformable mechanisms for tracked robots could decrease the number of actuators used while maintaining the flexibility and obstacle-crossing capability of these robots, and increasing their cost performance. Therefore, the underactuated tracked robots have appreciable research potential. In this paper, a novel tracked robot with a newly proposed underactuated revolute–revolute–prismatic (RRP) transformable mechanism, which is inspired by the sit-up actions of humans, was developed. The newly proposed tracked robot has only two actuators installed on the track pulleys for moving and does not need extra actuators for transformations. Instead, it could concentrate the track belt's tension toward one side, and the unbalanced tension would drive the linkage mechanisms to change its configuration. Through this method, the proposed underactuated design could change its external shape to create support points with the terrain and move its center of mass actively at the same time while climbing obstacles or crossing other kinds of terrains, thus greatly improving the climbing capability of the robot. The geometry and kinematic relationships of the robot and the crossing strategies for three kinds of typical obstacles are discussed. On the basis of such crossing motions, the parameters of links in the robot are designed to make sure the robot has sufficient stability while climbing obstacles. Terrain-crossing dynamic simulations were run and analyzed to prove the feasibility of the robot. A prototype was built and tested. Experiments show that the proposed robot could climb platforms with heights up to 33.3% of the robot's length or cross gaps with widths up to 43.5% of the robot's length.

Humanitarian Demining Serial-Tracked Robot: Design and Dynamic Modeling

Design and Performance Analysis of a Tracked Wall-Climbing Robot for Ship Inspection in Shipbuilding

Modeling and Control of General Hydraulic Excavator for Human-in-the-loop Automation

Dynamics Analysis of A Novel Mine Disaster Searching Robot

Design, simulation and manufacturing of a Tracked Surveillance unmanned ground vehicle

Obstacle Performance Analysis of Mine Research Robot Based on Terramechanics

Development and Experimental Study of Multi-Motion Model Robot with Wheel-Track Compound Structure

Design of a Fast Robotic Total Station Through Ad Hoc Virtual Experiments and Its Digital Twin

Intelligent Cyber-Mixmechatronic Micro-System for Monitoring and Controlling the Security and Surveillance Robots

Physical Design on a Robot for Under-mine Detect and Rescue

Intelligent Platform with BLDC Drives and Microsystems for Mechatronic Applications in Security and Surveillance

Structure design and kinematic analysis of dual arm robot

A Dynamic Motion Analysis of a Six-Wheel Ground Vehicle for Emergency Intervention Actions

Development of a Mobile Robot for Mine Exploration

Design and Kinematic Modeling of a Passively-Actively Transformable Mobile Robot

Design, modeling, and experimental analysis of the Crawler Unit for inspection in constrained space

Structure design on a leg-wheeled-integration robot with an earth-moving function

Uneven terrain negotiable mobile platform with passively adaptive double tracks and its application to rescue missions

Motion Planning and Performance Analysis of a Novel Six-Tracked Robot

Tracked robot with underactuated tension-driven RRP transformable mechanism: ideas and design

Structural design and motion characteristics analysis of dual-mode active swing arm tracked robot