Abstract:Current lithium-ion batteries consist of a graphite anode and a metal oxide cathode. Due to their relatively high energy density and rechargeability, they have enabled various applications over the past few decades. However, significant improvements to battery cost, performance, and safety for applications such as vehicle electrification require a shift to next-generation materials, such as silicon as an anode which offers higher capacity, as well as solid-state electrolytes (SSEs) which are non-flammable. Both of these technologies currently suffer challenges which have prevented their widespread adoption. Silicon suffers low conductivity, and large volume change on each cycle, subsequently causing loss in electrical contact and the formation of an unstable solid electrolyte interface (SEI) each cycle. This project aims to solve these challenges by wrapping silicon nanoparticles and a sacrificial spacing material with crumpled graphene sheets using a scalable, spray drying method, and coupling it with a solid electrolyte. The graphene shell provides electrical contact with the silicon and space for its expansion during lithiation. The solid electrolyte provides a safer alternative to liquid electrolytes, and further reduces the SEI formation which, with a liquid electrolyte, can leak into such crumpled structures. In this work we will present our initial results concerning how the spacing material affects the structure and how the overall structure can be modified by spray drying parameters to determine optimal conditions for capacity and cycle-life using, first, at typical, organic carbonate-based electrolyte. We will explore different spacing material candidates such as chitosan which, upon heat treatment of the sample, would not only provide space for the expansion of silicon, but the residual nitrogen-doped carbon would also act as a conductive filler inside the crumpled structure. Furthermore, we will investigate various binder systems and their impact on cycle-stability including polyvinylidene fluoride (PVDF), polyacrylic acid (PAA), sodium alginate (SA), and cross-linked SA. Based on preliminary, both PAA and SA are shown to have improved performance compared to PVDF as well as higher cycle life, however, SA forms smoother, thinner electrode films. Cross-linked SA is also shown to increase the cycling life and decrease the capacity loss per cycle. We then explore powder mixing and solution infiltration methods to introduce high conductivity SSEs and their performance when coupled to the graphene-wrapped silicon anode structures.

Nanoscale Structure of Positive Electrodes for Lithium-Ion Batteries with Graphene-Based Additives According to Small-Angle Neutron Scattering

Nanostructured Nb2O5 Cathode for High-Performance Lithium-Ion Battery with Super-P and Graphene Compound Conductive Agents

Facile Synthesis of Mesoporous NiCo2O4 Nanoneedle Arrays on Three Dimensional Graphene Thin Film Grown on Ni Foam for a High-Performance Binder-Free Lithium-Ion Battery Anode

Structure–performance relationships of lithium-ion battery cathodes revealed by contrast-variation small-angle neutron scattering

Metal-organic Framework Nanosheets-Guided Uniform Lithium Deposition for Metallic Lithium Batteries

Nanocomposites As Anode for Lithium-Ion Battery

Comprehensive Enhancement Of Nanostructured Lithium-Ion Battery Cathode Materials Via Conformal Graphene Dispersion

Unraveling the Effect of Conductive Additives on Li-Ion Diffusion Using Electrochemical Impedance Spectroscopy: A Case Study of Graphene vs. Carbon Black

Green synthesis of positive electrodes for high performance structural batteries - A study on graphene additives

Sub-10 Nm SnO2/Fe3O4/graphene Nanosheets: Nanocatalysis to Improve Initial Coulombic Efficiency for Lithium Storage

Multiscale Characterization of Composite Electrode Microstructures for High Density Lithium-ion Batteries Guided by the Specificities of Their Electronic and Ionic Transport Mechanisms

Influence of Conductive Additives and Binder on the Impedance of Lithium-Ion Battery Electrodes: Effect of Morphology

Study of Microstructure Change of Carbon Nanofibers as Binder-Free Anode for High-Performance Lithium-Ion Batteries

Design and Synthesis of Graphene/sno2/polyacrylamide Nanocomposites As Anode Material for Lithium-Ion Batteries

Graphene As a Conductive Additive to Enhance the High-Rate Capabilities of Electrospun Li4Ti5O12 for Lithium-Ion Batteries

Modality-Tunable Exfoliated N-Doped Graphene as Effective Electrolyte Additive for High-Performance Lithium-Sulfur Batteries

3D Graphene Nanosheets Crosslinked Core–Shell FeS2@N, S Co-Doped Porous Carbon for Improved Lithium/Sodium Storage Performance

Electrostatic Spray Deposition of Porous Sno2/Graphene Anode Films and Their Enhanced Lithium-Storage Properties

Effect of Nitrogen Dopant Agents in the Performance of Graphene-Based Cathodes for Li-S Batteries

Understanding the Conductive Carbon Additive on Electrode/Electrolyte Interface Formation in Lithium-Ion Batteries Via in Situ Scanning Electrochemical Microscopy

Graphene-Wrapped Silicon Nanoparticles for All-Solid-State Lithium-Ion Batteries