Research on Noise Reduction of Water Hydraulic Throttle Valve Based on RBF Neural Network and Multi-Island Genetic Algorithm

Huawei Wang,Linjia Nan,Xin Zhou,Yaozhong Wu,Bo Wang,Li Hu,Xiaohui Luo

DOI: https://doi.org/10.3390/machines12050333

IF: 2.899

2024-05-14

Machines

Abstract:Excessive pressure drop within the internal flow channel of the water hydraulic throttle valve will generate severe noise. In order to reduce the noise of the throttle valve, in this paper, the model of the throttle valve was established, and the flow characteristics and acoustic characteristics of the valve were simulated. The simulation results showed that the parameters of the throat structure, such as the half angle, throat inlet angle and throat length, have a significant effect on the noise of the valve. Then, the three main structural parameters were used as optimization variables, and radial basis function (RBF) neural networks and multi-island genetic algorithms (MIGA) were used to reduce the noise of the valve. The approximate model of the relationship between the structural parameters of the valve and noise was established by RBF neural networks, and MIGA was used to optimize the approximate model. Finally, the optimal valve model was established based on the obtained optimal parameters, and its noise was analyzed through simulation and experiment. The research results indicated that the optimization method, which combines RBF Neural Network and MIGA, can effectively reduce the noise of hydraulic throttle valves.

engineering, mechanical, electrical & electronic

What problem does this paper attempt to address?

### The Problem the Paper Attempts to Solve

The main goal of this paper is to reduce the noise generated by a hydraulic throttle valve by optimizing its internal structural parameters. Specifically, the research team established a model of the throttle valve and simulated its flow characteristics and acoustic properties. They found that key parameters of the throat structure (such as the half-cone angle, throat inlet angle, and throat length) have a significant impact on the noise of the throttle valve.

To further reduce noise, the researchers employed a Radial Basis Function (RBF) neural network and a Multi-Island Genetic Algorithm (MIGA) for optimization. First, they used the RBF neural network to establish an approximate model between the structural parameters of the throttle valve and the noise. Then, they used MIGA to optimize this approximate model. Finally, they established an optimized throttle valve model based on the obtained optimal parameters and verified its noise reduction effect through simulation and experiments.

The study shows that the optimization method combining RBF neural network and MIGA can effectively reduce the noise of hydraulic throttle valves.