Abstract:In‐depth analyses on the electrochemical behaviors and structural and interphasial stabilities of LiNiO2, LiNi0.95Co0.05O2, LiNi0.95Mn0.05O2, and LiNi0.95Al0.05O2 suggest that the intrinsic roles of key dopant elements in high‐nickel cathodes are regulating energy density, degree of delithiation, and extent of H2–H3 phase transition, contrary to the common belief that dopants, especially Mn, can inherently enhance the overall stabilities of high‐nickel cathodes. A rational compositional design is critical for utilizing LiNiO2‐based cathodes with Ni contents > 90% as promising next‐generation cathode materials. Unfortunately, the lack of a fundamental understanding of the intrinsic roles of key elements, such as cobalt, manganese, and aluminum, makes the rational compositional design of high‐Ni cathodes with a limited range of dopants (<10%) particularly challenging. Here, with 5% single‐element doped cathodes, viz., LiNi0.95Co0.05O2, LiNi0.95Mn0.05O2, and LiNi0.95Al0.05O2, along with undoped LiNiO2 (LNO), the influences of the dopants are systematically examined through a control of cutoff charge energy density and a common practice of cutoff charge voltage. Comprehensive investigations into the electrochemical properties, combined with in‐depth analyses of the structural and interfasial stabilities and electrolyte decomposition pathways through advanced characterizations, unveil the following: i) the intrinsic role of dopants regulates the cathode energy density or state‐of‐charge and, more critically, the occurrence of H2–H3 phase transition, which essentially dictates cyclability; ii) undoped LNO can be stabilized well with the avoidance of H2–H3 phase transition; and iii) Co provides more merits overall with an optimized electrochemical operating condition. This work provides guidance for the compositional design of high‐energy‐density high‐Ni cathodes and sheds light on the challenges of removing Co.

Doping of group IVB elements for nickel-rich cobalt-free cathodes

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Controlling the Microstructure of Cobalt-Free, High-Nickel Cathode Materials with Dopant Solubility for Lithium-Ion Batteries

Gospel for Improving the Lithium Storage Performance of High-Voltage High-Nickel Low-Cobalt Layered Oxide Cathode Materials.

Synergistically regulating the structural tolerance of Co-free Ni-rich cathode materials at high-rate through multi-heteroatoms substitution

Improving the Electrochemical Performances and Structural Stability of Ultrahigh-Ni Cathodes by Using Multi-Element Co-Doping Methods

Assessing the Intrinsic Roles of Key Dopant Elements in High‐Nickel Layered Oxide Cathodes in Lithium‐Based Batteries

Regulating the Charge Distribution of Oxygen by High-Entropy Doping to Stabilize Single-Crystal Ni-Rich Cathode Materials

Site-dependent multicomponent doping strategy for Ni-rich LiNi1−2yCoyMnyO2 (y = 1/12) cathode materials for Li-ion batteries

First-Principles Calculations of the Atomic Structure and Electronic Structure of F-Doped Li(Ni0.8Co0.1Mn0.1)O2 Cathode Material for Lithium-Ion Batteries

Complementary dual-doping of LiNi0.8Co0.1Mn0.1O2 cathode enhances ion-diffusion and stability for Li-ion batteries

Suppressing Ni/Li disordering in LiNi0.6Mn0.2Co0.2O2 cathode material for Li-ion batteries by rare earth element doping

Enhancing the Structural Stability and Electrochemical Performance of High-Nickel Cathode Materials through Ti Doping with an Exothermic Non-oxide Precursor

The role of tungsten-related elements for improving the electrochemical performances of cathode materials in lithium ion batteries

Effective reinforcement on the structural stability and electrochemical performances of ultra-high nickel cobalt free cathode material by co-doping

Low‐Electronegativity Cationic High‐Entropy Doping to Trigger Stable Anion Redox Activity for High‐Ni Co‐Free Layered Cathodes in Li‐Ion Batteries

Structural Reinforcement through High-Valence Nb Doping to Boost the Cycling Stability of Co-Free and Ni-Rich LiNi 0.9 Mn 0.1 O 2 Cathode Materials

Boosting cell performance of LiNi0.8Co0.1Mn0.1O2 cathode material via structure design

Precise Modulation of Surface Lattice to Reinforce Structural Stability of High-Nickel Layered Oxide Cathode by Hafnium Gradient Doping

Ti‐Gradient Doping to Stabilize Layered Surface Structure for High Performance High‐Ni Oxide Cathode of Li‐Ion Battery

Design of Nb5+-doped high-nickel layered ternary cathode material and its structure stability