Abstract:Electroplating sludge is a hazardous waste and secondary metal resource because of its heavy metal content, which poses a huge threat to environmental safety if not properly disposed. An innovative process of oxidizing roasting followed by water leaching and smelting reduction to recover Cr, Cu, and Ni from electroplating sludge was proposed in this research, in which other two hazardous wastes of spent cathode carbon combustion dust and copper refining slag were co-treated. The NaF from spent cathode carbon combustion dust could convert Cr2O3 to Na2CrO4 using the oxidizing roasting process, resulting in a Cr recovery through the subsequent water leaching. The Na2CrO4 formation was promoted by CaO owing to it transferring the Cr spinel phase of FeCr2O4 [1+] to CaCrO4 and then to Na2CrO4. Under optimal conditions, the Cr recovery reached 97.1 %, and most ‘F’ was solidified into CaF2. In the next smelting reduction of the leaching residue, the Cu and Ni were recovered mainly in the form of Cu-Ni alloy. The addition of copper refining slag promoted their recovery, due to it modifying the molten slag and alloy structures and increasing the Cu-Ni alloy separation from molten slag. Some generated high-melting-point Cu-Ni-Fe and Ni-Fe alloys were converted to a Cu-Ni alloy with a low melting point in presence of Co from the copper refining slag, simultaneously with which the Fe was transferred out from Cu-Ni-Fe and Ni-Fe alloys and combined with Co to form a Fe-Co alloy. It increased Cu-Ni alloy droplets aggregation from molten slag and decreased their contents in the residual slag. Under optimized conditions, the Cu and Ni contents in the residual slag decreased to 0.37 and 0.06 wt%, respectively. Besides, the residual slag mainly composed of CaO, CaF2 and SiO2 could be used to prepare building materials rendering it harmless.

Fluorine Fixation During the Co-treatment of Spent Cathode Carbon and Copper Slag

Iron and copper recovery from copper slags through smelting with waste cathode carbon from aluminium electrolysis

A Superior Technology for Removing Fluorine from Spent Cathode Carbon: Optimization of the Process by Response Surface Methodology

Treating waste with waste: Metals recovery from electroplating sludge using spent cathode carbon combustion dust and copper refining slag

Selective extraction of lithium and solidified fluoride from overhaul slag by the calcium sulfate roasting and water leaching

Co-treatment of copper electrolytic sludges and copper scraps for the recycled utilization of copper and arsenic

Mechanistic study on calcium ion diffusion into fayalite: A step toward sustainable management of copper slag

A Study on Reduction of Copper Smelting Slag by Carbon for Recycling into Metal Values and Cement Raw Material

Solidification/stabilization of spent cathode carbon from aluminum electrolysis by vitric, kaolin and calcification agent: fluorides immobilization and cyanides decomposition

An efficient and clean treatment of spent carbon cathode via fluorination roasting: Deep separation strategy for insoluble aluminosilicates

Reduction of Copper Smelting Slag by Carbon for Smelting Cu-Fe Alloy

An efficient approach to utilize copper smelting slag: Separating nonferrous metals and reducing iron oxide at high temperature

Thermodynamic Phase Conversion Mechanism on Copper–Cobalt Slag Cleaning Process Using Gypsum Wastes as Sulfurizing Agent

Efficient recovery of zinc and copper from copper smelting slag (CSS) by cooperative modification with a composite medium of FeS-O2

Co-treatment of waste smelting slags and gypsum wastes via reductive-sulfurizing smelting for valuable metals recovery

Recovery of copper from refining slags of copper fire anode furnace by waste acid leaching and CaO roasting process

A novel strategy for harmlessness and reduction of copper smelting slags by alkali disaggregation of fayalite (Fe2SiO4) coupling with acid leaching

A new eco-friendly approach for recovery of iron from copper smelting slag: Using CO2 and Cl2 recycling strategies

Purification mechanism of fluoride-containing sludge from different sources by hydrometallurgy

Minimization and stabilization of smelting arsenic-containing hazardous wastewater and solid waste using strategy for stepwise phase-controlled and thermal-doped copper slags

Optimization of response surface methodology (RSM) for defluorination of spent carbon cathode (SCC) in fire-roasting aluminum electrolysis