Abstract:Abstract Exploration wells in India are being drilled to target tight sandstone reservoirs of Mesozoic age with potential hydrocarbon accumulation in the Gulf of Kutch (GK) & Gulf of Saurashtra (GS). Typical permeability ranges from 0.1 md to 2.5 md with effective porosity in range of 8% to 13% in good sandstone layers. These boreholes are seen to have substantial risks in drilling and completion, as evident by the severe wellbore instability events in the offset wells. Presence of wide breakouts and stress rotations along the wellbore axis with variation in dips along fractures are often observed, indicating complicated wellbore failure modes. Considering the increasing exploration activity and field development plans for these basins located in western offshore India, maintenance of hole integrity till open hole logging and optimizing perforation depths for hydro-fracturing jobs are the main challenge in upcoming wells. An advanced acoustic geomechanics workflow for the estimation of formation horizontal stresses from the inversion of four velocity radial profiles was implemented in shallower formations of offset wells with the help of advanced borehole 3D acoustic profiling measurements. Based on the estimation of stress parameters, stable mud weight windows and rock mechanical properties were estimated for a planned well. Reported over-gauged hole condition, caving, and stuck tool incidents are found at the depth intervals where the estimated breakout mud limit exceeds the mud weight used during drilling of offset wells. Pore pressure value is in range of 13.7 ppg to 14.1 ppg EMW with sudden change in regime during transition from Trap formation to Mesozoic formation. Stable mud weights to avoid breakouts are in range of 14.2 ppg to 14.7 ppg EMW for vertical well. The local normal fault regime is identified with few interbedded stress barriers. Simulated ECD value ranges 15.6 ppg to 16.1 ppg for an 8.5-in section with 600 gpm. The rock mechanical properties constrained by inverted stresses and wellbore failure were used to optimize bit and BHA design in the planned well. Real-time monitoring has been performed in the planned well using logging while drilling data, borehole images, and cutting analysis. Intermediate advanced acoustic profiling logs and drilling parameters were used in the planned well to directly estimate stress gradients and proactively keep mud weight within the stable mud weight window. By monitoring magnitude of breakouts present in LWD images and caving type, further remedial actions were taken. Few high angle features with gas peaks were encountered as seen in offset wells. Hole cleaning was performed regularly through pumping high viscous pills and cutting load was monitored at each connection through ECD and ESD variations. Near balance equilibrium was maintained to minimize hoop stress related skin around the sandstone layers. The modifications resulted in significant reduction of nonproductive time in the planned well as compared to the offset wells by 40%. Successful casing and cementing of 7-in liner to planned depth with good cement bond was also achieved, unlike offset wells where wellbore instabilities were severe. Upon designing an appropriate stimulation strategy in a HPHT and high-stress environment, closure pressure and breakdown pressure ranges were 12,300 psi to 13,500 psi and 13,000 psi to 14,800 psi, respectively, in sandstone with 8% to 13% effective porosity. To optimize expensive hydraulic fracturing stimulation treatments, the open hole advanced 3D acoustic logs were analyzed to identify and test gas bearing intervals. Intervals with suspected critically stressed natural fractures as indicated by 3D shear moduli changes were identified. The optimized intervals flowed gas to surface at good rates with minimal stimulation, proving commercial viability of the field.

Delineation of thin and discrete sand reservoir facies from shale-dominated Kopili Formation (Middle to Late Eocene) using the post-stack seismic inversion and neural network algorithm: A case study from Assam Basin, India

Unconventional Tight Sand Oil: Breaking the Evaluation Barriers

Appraisal of reservoir quality for hydrocarbon-bearing deep-water Miocene sandstones incised valley, south-east Asian offshore Indus: An application of seismic attributes and instantaneous spectral porosity quantitative reservoir simulations

Focused reservoir characterization: analysis of selected sand units using well log and 3-D seismic data in 'Kukih' field, Onshore Niger Delta, Nigeria

Nanopore Heterogeneity and Accessibility in Oil and Gas Bearing Cretaceous KG (Raghampuram) Shale, KG Basin, India: An Advanced Multi-analytical Study

Characterization of tight sandstone and sedimentary facies using well logs and seismic inversion in lacustrine gravity-flow deposits

Controls on Reservoir Heterogeneity of a Shallow-Marine Reservoir in Sawan Gas Field, SE Pakistan: Implications for Reservoir Quality Prediction Using Acoustic Impedance Inversion

Seismic attributes and spectral decomposition-based inverted porosity-constrained simulations for appraisal of shallow-marine lower-Cretaceous sequences of Miano gas field, Southern Pakistan

Geomechanical Aspect of Successful Deep Tight Gas Sandstone Exploration Involving Drilling to Completion

Sedimentology and reservoir characterization of Upper Cretaceous Kawagarh Formation, Upper Indus Basin, Lesser Himalayas, Pakistan: inferences from petrography, SEM-EDS and petrophysics

Estimation of porosity and facies distribution through seismic inversion in an unconventional tight sandstone reservoir of Hangjinqi area, Ordos basin

Estimation of reservoir properties using pre-stack seismic inversion and neural network in mature oil field, Upper Assam basin, India

Data-driven exploration in complex basins: A critical aspect of new prospect delineation in thin sands using simultaneous seismic inversion

Sand-ratio distribution in an unconventional tight sandstone reservoir of Hangjinqi area, Ordos Basin: Acoustic impedance inversion-based reservoir quality prediction

Application of prestack Poisson dampening factor and Poisson impedance inversion in sand quality and lithofacies discrimination

Application of seismic attributes and quantitative-based instantaneous static reservoir simulations for quantitative imaging of lithology and fluids of Lower-Cretaceous hydrocarbon-bearing delta traps, Onshore, Pakistan

Quantification of sand fraction from seismic attributes using Neuro-Fuzzy approach

Conceptual Model of Tura-Sylhet-Kopili Depositional Systems , Upper Assam Basin , India using Seismic Sedimentology

Seismic Attributes and Inverse Quantitative Static Density–Porosity–Constraint Reservoir Simulations of Naturally-Fractured Hydrocarbon-Bearing Lower Cretaceous Shallow-Marine Architectures, Onshore Indus, Pakistan

Delineation of stratigraphic traps within the basin floor fans of Miocene sedimentary sequences, offshore Indus, Pakistan using inverted acoustic impedance simulations

Unlocking thin sand potential: a data-driven approach to reservoir characterization and pore pressure mapping