Direct air capture: fledgling technology or world saviour?

Jennifer A. Rudd

DOI: https://doi.org/10.1038/s41570-023-00496-9

IF: 34.5695

2023-05-04

Nature Reviews Chemistry

Abstract:A review of Paul McKendrick's book Scrubbing the Sky: Inside the Race to Cool the Planet, which looks at the chemistry, engineering and economics behind direct air capture.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Direct air capture: process technology, techno-economic and socio-political challenges

María Erans,Eloy S. Sanz-Pérez,Dawid P. Hanak,Zeynep Clulow,David M. Reiner,Greg A. Mutch

DOI: https://doi.org/10.1039/d1ee03523a

2022-01-01

Abstract:This comprehensive review appraises the state-of-the-art in direct air capture materials, processes, economics, sustainability, and policy, to inform, challenge and inspire a broad audience of researchers, practitioners, and policymakers.

energy & fuels,chemistry, multidisciplinary,engineering, chemical,environmental sciences
A Technological Review of Direct Air Carbon Capture and Storage (DACCS): Global Standing and Potential Application in Australia

Domingo Garza,Paul Dargusch,David Wadley

DOI: https://doi.org/10.3390/en16104090

IF: 3.2

2023-05-16

Energies

Abstract:There is mounting evidence that, unless greenhouse gas (GHG) emissions fall back quickly, the goals outlined by the 2015 Paris Agreement to keep the global temperature rise well below 2 °C and preferably 1.5 °C will not be met. In response to these concerns, direct air carbon capture and storage (DACCS) technologies are gaining research and development attention. This article provides a thorough comparison of the two leading DACCS variants and reports on their status among major research and policy institutions worldwide. By translating the operating and capital costs to the Australian context, we assess the viability of DACCS implementation using either cheap renewable or legacy fossil energy to power CO2 extraction plants.

energy & fuels
Direct Air Capture: A Review of Carbon Dioxide Capture from the Air

A. Okesola,T. W. Alabi,J. Olowo,A. A. Oyedeji,A. Abdulhamid,B. E. Ayodele

DOI: https://doi.org/10.1088/1757-899X/413/1/012077

2018-09-10

IOP Conference Series: Materials Science and Engineering

Abstract:The level of carbon dioxide as well as other noxious gases in the atmosphere has been on the increase and this has caused a lot of issues relating to the effect of these gases to human and animal health. A process for capturing carbon dioxide directly from the atmosphere will go a long way in making the world a safer and healthier place for the entire inhabitant. Different methods and processes have been postulated and promoted by various researchers to mitigate climate change by reducing the amount of carbon dioxide in the atmosphere. This paper aims to consider a process to capture the carbon dioxide directly (Direct Air Capture) from the atmosphere at a cheap, sustainable and affordable way. The process aims to capture the carbon dioxide, concentrate it and pressurize it for storage or further usage. This is a deviation from the process of carbon capture from point source such as power plants, industries etc. The process focusses on capturing carbon dioxide that have found their way into the atmosphere through other smaller sources such as automobile exhaust, domestic power generators, fossil fuel burning equipment and many other sources not reported or captured in the international data base. A summation of the above-named sources will amount to a huge impact on the environment and a method to remove the contaminant at a cheap, affordable and sustainable way will be of immense benefit worldwide most especially developing countries in tackling climate change.

Environmental Science,Physics
Research on Current and Future Aspects of Direct Air Capture of CO2

Aodi Lin

DOI: https://doi.org/10.54097/hset.v73i.14677

2023-11-29

Abstract:Direct Air Capture (DAC) technology is a revolutionary method that employs sorbents and a capturing mechanism to extract carbon dioxide (CO2) from the atmospheric air. This approach presents a highly adaptable and scalable solution for mitigating greenhouse gas emissions. Once the CO2 is captured, its potential uses are virtually limitless, spanning from industrial applications to secure underground storage for long-term sustainability. This research paper delves into the current status and future prospects of DAC technology, which holds immense promise for directly reducing atmospheric CO2 levels. The exploration encompasses the core principles of DAC, its diverse applications, the advantages it offers, the evolving landscape of this transformative technology, and the keen interest of major corporations in expanding the utilization of DAC. With its potential to reshape the way this generation combats climate change, DAC technology emerges as a pivotal tool in our efforts to address the global carbon challenge.
From Lab to Fab: Development and Deployment of Direct Air Capture of CO2

Vahid Barahimi,Monica Ho,Eric Croiset

DOI: https://doi.org/10.3390/en16176385

IF: 3.2

2023-09-03

Energies

Abstract:Direct Air Capture (DAC) is a promising technology to fight climate change by capturing carbon dioxide (CO2) from the air. For DAC to be a negative emissions technology, the captured CO2 must be removed permanently, but can also be used as a net-zero technology to produce sustainable chemicals, fuels or other materials. This review presents a comprehensive survey of recent advancements, challenges, and potential applications of DAC technology, with an emphasis on the recent rapid increase in the number of DAC developers, the majority of them being founded in the past 4 years. Through pilot projects and recent commercial deployments, several DAC companies have made significant advances and demonstrated their scalability. Cost and energy efficiency remain significant impediments to the wide deployment of DAC. Integration with emission-free energy sources and utilization of waste heat are being researched to boost the total energy efficiency of DAC systems. Further research of electrochemical technologies for regeneration or direct capture are needed, as well as the development of new, modified, or hybrid adsorbents for improved capture efficiencies. Moreover, favorable regulations and financial incentives are crucial for enhancing the viability of DAC projects and will need to substantially increase if Paris Agreement goals are to be achieved.

energy & fuels
Direct Air Capture (DAC) for Achieving Net-Zero CO2 Emissions: Advances, Applications, and Challenges

Guihe Li,Jia Yao

DOI: https://doi.org/10.3390/eng5030069

IF: 12.8

2024-07-04

Eng

Abstract:Carbon dioxide (CO2), as the primary greenhouse gas, has significant impacts on global climate change, leading to severe and irreversible adverse consequences for ecosystems and human environments. To address the issue of excessive CO2 emissions, efforts in recent years have yielded significant progress in the development of clean energy sources and the promotion of carbon capture, utilization, and storage (CCUS) technologies. Conventional CO2 capture techniques are limited in addressing global atmospheric CO2 excess effectively, as they target only high-concentration CO2 emissions and require implementation at specific emission points. Direct air capture (DAC) technology has emerged as a promising solution due to its flexibility in deployment, avoidance of land competition, and ability to capture legacy CO2 emissions. Additionally, DAC offers opportunities for producing synthetic clean fuels, thereby reducing reliance on traditional fossil fuels and aiding in reducing greenhouse gas emissions. This study provides a comprehensive review of DAC technology, encompassing its principles, technological advancements, real-world applications, challenges, and future research directions. By offering insights into the current state and potential of DAC technology, this study aims to guide global efforts in scaling up DAC deployment, ultimately contributing to achieving global carbon neutrality or even negative emissions.
Direct Air Capture Technology and Its Application

Yiwen Huang

DOI: https://doi.org/10.54097/ajst.v8i1.14149

2023-11-21

Academic Journal of Science and Technology

Abstract:Direct air capture technology (DAC) is integral to achieving carbon emission targets. This paper briefly analyses the application of DAC technology in indoor CO2 removal and CO2 mineralisation. Thanks to the elevated concentration of CO2 in the air (1000ppm) and the integrated DAC unit and air conditioning unit, the indoor CO2 removal system significantly reduces energy consumption. CO2 mineralisation, combined with DAC technology, offers a safe solution for permanent carbon storage and the possibility of obtaining a valuable end product by selecting the right mineralised feedstock. Future research should continue to focus on the development of adsorbent materials and the integration of CO2 capture with subsequent applications to achieve sustainability.
Key uncertainties behind global projections of direct air capture deployment

Kasra Motlaghzadeh,Vanessa Schweizer,Neil Craik,Juan Moreno-Cruz

DOI: https://doi.org/10.1016/j.apenergy.2023.121485

IF: 11.2

2023-07-12

Applied Energy

Abstract:To limit global warming to levels set in the Paris Agreement, integrated assessment modeling highlights the necessity of removing gigatons of carbon dioxide. Direct air capture is one of the potential methods for carbon dioxide removal and has gained significant attention despite being a relatively new technology. While some scenarios can meet Paris targets without relying on direct air capture, other models show the need for up to 38 gigatons/yr of removal by this technology. Such wide variation in projections reflects uncertainty over the feasibility of deploying direct air capture at scale and points the need for greater attention to the model assumptions driving this variation. This study provides a comprehensive review of scenarios from the Intergovernmental Panel on Climate Change Sixth Assessment Report and peer-reviewed studies focusing on direct air capture as a mitigation strategy. The review identifies several key factors contributing to uncertainty in direct air capture projections, including prolonged fossil fuel use, diversity of carbon removal methods, future socio-economic conditions, intergenerational assumptions, deployment limitations, and technology costs. The study recommends conducting multi-model assessments of direct air capture scenarios due to the influence of various assumptions and model structures on projections. The authors also suggest including different variants of direct air capture technology and both carbon utilization and storage pathways in future models, as these factors can impact system demands, economic efficiency, and public acceptability.

energy & fuels,engineering, chemical
Direct Air Capture of CO2: A Key Technology for Ambitious Climate Change Mitigation

Christian Breyer,Fasihi,Cyril Bajamundi,Felix Creutzig,Mahdi Fasihi

DOI: https://doi.org/10.1016/j.joule.2019.08.010

IF: 46.048

2019-09-01

Joule

Abstract:Christian Breyer is Professor for Solar Economy at LUT University, Finland. His major expertise is research of technological and economic characteristics of renewable energy systems specializing for highly renewable energy systems, on a local but also global scale. Research includes integrated sector analyses with power, heat, transport, desalination, industry, NETs, CCU, and Power-to-X. He worked previously for Reiner Lemoine Institut, Berlin, and Q-Cells (now Hanwha Q Cells). He is a member of ETIP PV, IEA-PVPS, scientific committee of the EU PVSEC and IRES, chairman at the Energy Watch Group, and reviewer for the IPCC. Mahdi Fasihi, M.Sc., is Research Assistant at LUT University, Finland. His focus area is CO2 direct air capture and techno-economic assessment of renewable electricity-based Power-to-X fuels and chemicals production and global trading. Highly resolved energy system modeling is a key method for his potential assessments. He received his M.Sc. degree in Energy Technology at LUT University and B.Sc. in Mechanical Engineering at Guilan University, Iran. Cyril Bajamundi, PhD, is Chief Technology Officer of Soletair Power Oy, a Finnish start-up company focused on CO2 direct air capture and Power-to-X fuel conversion. He had been a Senior Scientist with VTT Technical Research Center of Finland, working in direct air capture of CO2 to support power-to-gas and power-to-liquid technologies for energy storage. Previously, he worked as Assistant Professor in the Department of Chemical Engineering at the University of the Philippines, where he received his M.Sc. in Chemical Engineering. Felix Creutzig leads a working group at the Mercator Research Institute on Global Commons and Climate Change, Berlin, and is Chair of Sustainability Economics of Human Settlements at Technical University Berlin. Educated as a physicist, he holds a PhD in Computational Neuroscience. He coordinates the chapter on “demand, services, and social aspects of mitigation” in the 6th assessment report of the IPCC. Research interests include data science and machine learning approaches for designing low-carbon cities, and demand-side solutions for climate change mitigation.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Making Direct Air Capture Affordable; Technology, Market and Regulatory Approaches

Maximus L. L. Beaumont

DOI: https://doi.org/10.3389/fclim.2022.756013

2022-07-18

Frontiers in Climate

Abstract:Direct Air Capture (DAC) is an important solution to curb global warming and enable a circular economy. As fossil fuels dwindle, carbon for commodities such as plastic, cement, steel and liquid fuel, will need to come from somewhere. With the low cost of industrial CO2 (roughly $80 a ton) as well as the low value of most carbon credits, making DAC-produced CO2 competitive at scale is almost impossible. But what if we could scale DAC processes in markets that make sense now, building on learnings as we go while making industries less carbon intensive? The first such application is air quality and energy efficiency in indoor spaces. DAC technology can stabilize CO2 and water levels inside indoor environments to enhance the recirculation rate of internal air, thereby saving significant energy for the HVAC. Another application is the use of small-scale DAC units—providing CO2 at the scale of kilos a day rather than tons, taking advantage of the high CO2 price at that scale as well as B2C markets that otherwise rely on bottled CO2. The approach is called Decentralised DAC or DDAC (analogous to decentralised solar). DAC processes need to be developed but to scale our learnings and drive down costs, we must fund R&D and introduce a significant carbon tax. Finally, interesting new developments such as electro-swing and humidity-swing carbon capture, have the potential to drastically decrease the energy footprint of DAC (its main cost driver), paving the way to making DAC affordable.
Indoor CO2 direct air capture and utilization: Key strategies towards carbon neutrality

L.R. López,P. Dessì,A. Cabrera-Codony,L. Rocha-Melogno,N.J.R. Kraakman,M.D. Balaguer,S. Puig

DOI: https://doi.org/10.1016/j.clet.2024.100746

2024-06-01

Cleaner Engineering and Technology

Abstract:Direct air capture (DAC) is a promising technology that can help to remove carbon dioxide (CO2) from the air. One application of DAC is indoor CO2 direct air capture (iCO2-DAC). A wide range of materials with unique properties for CO2 capture have been investigated, including porous materials, zeolites, and metal-organic frameworks. The selection of suitable materials for iCO2-DAC depends on several factors, such as cost, CO2 adsorption capacity, and stability. The development of new materials with improved properties for iCO2-DAC is an active research area. The captured CO2 can serve as a renewable carbon source to produce biofuels for internal use (e.g., for heating purposes), decreasing the environmental impact of buildings. This review article highlights the importance of iCO2-DAC to improve indoor air quality in buildings and boost the circular economy. We discuss the available carbon capture technologies and materials, discussing their properties and focusing on those potentially applicable to indoor environments. We also provide a hypothetic scenario where CO2 is captured from different indoor environments and transformed into sustainable fuels by using an emerging carbon capture and utilization technology (microbial electrosynthesis). Finally, we evaluate the economic feasibility of such an innovative approach in comparison to the use of traditional, fossil-based fuels.
Direct air capture of CO2: from insights into the current and emerging approaches to future opportunities

Muhammad Zeeshan,Michelle K. Kidder,Emily Pentzer,Rachel B. Getman,Burcu Gurkan

DOI: https://doi.org/10.3389/frsus.2023.1167713

2023-06-16

Frontiers in Sustainability

Abstract:The rapid development of direct air capture (DAC) technologies has become critical in order to remove CO 2 from the atmosphere and limit global warming to a maximum of 1.5°C. In this perspective, we provide a mini review of the current research on the emerging liquid- and solid-based sorbent materials to capture CO 2 , summarize the existing challenges of DAC technologies, and suggest future research directions to accelerate the development of DAC systems. In particular, the desired properties for a breakthrough sorbent that efficiently captures CO 2 from the air and releases it for sequestration are described.
Effects of Direct Air Capture Technology Availability on Stranded Assets and Committed Emissions in the Power Sector

Shreekar Pradhan,William M. Shobe,Jay Fuhrman,Haewon McJeon,Matthew Binsted,Scott C. Doney,Andres F. Clarens

DOI: https://doi.org/10.3389/fclim.2021.660787

2021-06-03

Frontiers in Climate

Abstract:We examine the effects of negative emission technologies availability on fossil fuel-based electricity generating assets under deep decarbonization trajectories. Our study focuses on potential premature retirements (stranding) and committed emissions of existing power plants globally and the effects of deploying direct air carbon capture and biomass-based carbon capture and sequestration technologies. We use the Global Change Analysis Model (GCAM), an integrated assessment model, to simulate the global supply of electricity under a climate mitigation scenario that limits global warming to 1.5–2°C temperature increase over the century. Our results show that the availability of direct air capture (DAC) technologies reduces the stranding of existing coal and gas based conventional power plants and delays any stranding further into the future. DAC deployment under the climate mitigation goal of limiting the end-of-century warming to 1.5–2°C would reduce the stranding of power generation from 250 to 350 GW peaking during 2035-2040 to 130-150 GW in years 2050-2060. With the availability of direct air capture and carbon storage technologies, the carbon budget to meet the climate goal of limiting end-of-century warming to 1.5–2°C would require abating 28–33% of 564 Gt CO 2 -the total committed CO 2 emissions from the existing power plants vs. a 46–57% reduction in the scenario without direct air capture and carbon storage technologies.
Direct air capture multiscale modelling: From capture material optimization to process simulations

Dana Marinič,Blaž Likozar

DOI: https://doi.org/10.1016/j.jclepro.2023.137185

IF: 11.1

2023-04-19

Journal of Cleaner Production

Abstract:A potential to decarbonize atmosphere, while simultaneously providing a feedstock for functional industrial applications, induces a strong economic incentive for direct air capture (DAC). However, DAC systems, developed to date, are energy, resource, and cost prohibitive. Measurement-complementing multiscale modelling has proven to be of a large visible value for the sorbent rapid screening from a vast scientific collection of prospective selected candidates, machine learning (ML) integration, and for the process design engineering with a characteristic low penalty for CO 2 regeneration and optimal uptake rates. The review provides an extensive evaluation of recent advances in multiscale modelling of DAC research. It introduces the theoretical physical descriptions of DAC, presents atom scale structuring, and brings together the state of the art of this, until now, poorly-researched analysis topic. Reviewed (CO 2 mass) transfer works span from the ab initio density functional theory (DFT) calculation relationships to mesoscale Monte Carlo, molecular dynamics simulations and micro-kinetics, adsorption/desorption, and lastly, most commonly-investigated specific macroscale concept. The modelled DAC processes properties reported in the literature have been compared, which allowed us to identify the most effective sorbents. Amine functionalized metal-organic frameworks exhibit low energy requirements, the lowest reported was 1000 kWh tCO 2 −1 , while the lowest published cost was 60 $ tCO 2 −1 . Recently, there are progressively emerging promising new entrants into the DAC field, providing climate-neutral feedstock for commercial processes. The market demand for CO 2 is expected to exponentially rise up to 6.1 Gt in 2050, while the cost of implementing DAC technologies is predicted to be reduced under 125 $ tCO 2 −1 in the year 2030. Further modelling research activities in CO 2 (sorption) bed form phenomena could not only break the barriers of current renewable technologies, but also couple the CO 2 reactions with the sequestration, reactors, and neutralization of harmful environmental pollutants, monoxide, NO x , SO x , etc. DAC could be ultimately coupled with electrolysis (hydrogen), producing e-fuels.

environmental sciences,green & sustainable science & technology,engineering, environmental
Electrochemical direct air capture and direct ocean capture: The next frontier in carbon removal

Mihrimah Ozkan,Amir Shiner,Nadezda Kongi,T. Alan Hatton,Steve Oldham,Edward Sanders

DOI: https://doi.org/10.1016/j.chempr.2023.12.015

IF: 23.5

2024-01-13

Chem

Abstract:The electrochemical reduction of CO2 can tailor product output by adjusting the voltage in the electrochemical cell, streamlining the production process without thermal energy. This Voices article discusses the latest developments in electrochemical direct air capture and direct ocean capture with leading experts from industry and academia, offering insights into the future trajectory of these innovative technologies.

chemistry, multidisciplinary
Recent advances in direct air capture by adsorption

Xuancan Zhu,Wenwen Xie,Junye Wu,Yihe Miao,Chengjie Xiang,Chunping Chen,Bingyao Ge,Zhuozhen Gan,Fan Yang,Man Zhang,Dermot O'Hare,Jia Li,Tianshu Ge,Ruzhu Wang

DOI: https://doi.org/10.1039/d1cs00970b

IF: 46.2

2022-01-01

Chemical Society Reviews

Abstract:Significant progress has been made in direct air capture (DAC) in recent years. Evidence suggests that the large-scale deployment of DAC by adsorption would be technically feasible for gigatons of CO2 capture annually. However, great efforts in adsorption-based DAC technologies are still required. This review provides an exhaustive description of materials development, adsorbent shaping, in situ characterization, adsorption mechanism simulation, process design, system integration, and techno-economic analysis of adsorption-based DAC over the past five years; and in terms of adsorbent development, affordable DAC adsorbents such as amine-containing porous materials with large CO2 adsorption capacities, fast kinetics, high selectivity, and long-term stability under ultra-low CO2 concentration and humid conditions. It is also critically important to develop efficient DAC adsorptive processes. Research and development in structured adsorbents that operate at low-temperature with excellent CO2 adsorption capacities and kinetics, novel gas-solid contactors with low heat and mass transfer resistances, and energy-efficient regeneration methods using heat, vacuum, and steam purge is needed to commercialize adsorption-based DAC. The synergy between DAC and carbon capture technologies for point sources can help in mitigating climate change effects in the long-term. Further investigations into DAC applications in the aviation, agriculture, energy, and chemical industries are required as well. This work benefits researchers concerned about global energy and environmental issues, and delivers perspective views for further deployment of negative-emission technologies.
Carbon dioxide separation and capture by adsorption: a review

DOI: https://doi.org/10.1007/s10311-023-01589-z

IF: 13.615

2023-03-17

Environmental Chemistry Letters

Abstract:Rising adverse impact of climate change caused by anthropogenic activities is calling for advanced methods to reduce carbon dioxide emissions. Here, we review adsorption technologies for carbon dioxide capture with focus on materials, techniques, and processes, additive manufacturing, direct air capture, machine learning, life cycle assessment, commercialization and scale-up.

environmental sciences,engineering, environmental,chemistry, multidisciplinary
A Comparative Study of Different Sorbents in the Context of Direct Air Capture (DAC): Evaluation of Key Performance Indicators and Comparisons

Grazia Leonzio,Paul S. Fennell,Nilay Shah

DOI: https://doi.org/10.3390/app12052618

2022-03-03

Applied Sciences

Abstract:Direct air capture can be based on an adsorption system, and the used sorbent (chemisorbents or physisorbents) influences process. In this work, two amine-functionalized sorbents, as chemisorbents, and three different metal organic frameworks, as physisorbents, are considered and compared in terms of some key performance indicators. This was carried out by developing a mathematical model describing the adsorption and desorption stages. An independent analysis was carried out in order to verify data reported in the literature. Results show that the equilibrium loading is a critical parameter for adsorption capacity, energy consumption, and cost. The considered metal organic frameworks are characterized by a lower equilibrium loading (10−4 mol/kg) compared to chemisorbents (10−1 mol/kg). For this reason, physisorbents have higher overall energy consumptions and costs, while capturing a lower amount of carbon dioxide. A reasonable agreement is found on the basis of the operating conditions of the Climeworks company, modelling the use of the same amine cellulose-based sorbent. The same order of magnitude is found for total costs (751 USD/tonneCO2 for our analysis, compared to the value of 600 USD/tonneCO2 proposed by this company).
Development of sorbent materials for direct air capture of CO2

Chen, Xi

DOI: https://doi.org/10.1557/s43577-022-00320-7

IF: 5

2022-06-18

MRS Bulletin

Abstract:Building a carbon–neutral world requires the removal of excess CO2 that has already been dumped into the atmosphere. The technologies have been well established to remove carbon dioxide directly from ambient air, or "direct air capture" (DAC). DAC is still in its infancy, with many challenges remaining. Sorbents are central to the capture of CO2 from ambient air. Many sorbents have been reported to take up CO2, but they all have advantages and disadvantages. Recent advances in material synthesis and surface chemistry have resulted in new generations of CO2 sorbents. Development needs to progress quickly, because global warming will not wait. We summarize recent progress on designed sorbents for CO2 capture from ambient air. There are mainly six typical technologies for DAC, including physical sorption, sorption by strong bases, sorption by amine-modified materials, sorption by aqueous amino acid solution followed by precipitation with a guanidine compound, moisture-swing sorption, and electrochemical-swing sorption. Existing research works have put forward future perspectives and directions of sorbent materials for DAC technologies.

materials science, multidisciplinary,physics, applied
Energetic and Life Cycle Assessment of Direct Air Capture: A Review

Junyao Wang,Shuangjun Li,Shuai Deng,Xuelan Zeng,Kaixiang Li,Jianping Liu,Jiahui Yan,Libin Lei

DOI: https://doi.org/10.1016/j.spc.2022.12.017

IF: 8.921

2022-12-30

Sustainable Production and Consumption

Abstract:Recent prospective climate scenarios start to embrace direct air capture (DAC) technologies to achieve climate goals, although the realistic application of DAC systems remains controversial, particularly with regard to their energy consumption and overall environmental concerns. In this paper, the energetic and life cycle analysis studies are systematically reviewed for typical DAC technologies. Existing energetic analysis approaches are identified and analyzed through key features and the methodological choices for each LCA step are discussed in detail. Although the inconsistencies in the contexts and assumptions of these studies would not allow a direct comparison of results, it is observed that DAC could achieve negative emissions for all technology families, from a life cycle perspective. Nevertheless, the carbon removal efficiency of typical systems demonstrates significant variation from lower than 10 % to over 95 %, which is dominated by the types of energy source and the amount of energy consumption. To improve the understanding of the realistic potential of DAC, it is recommended to develop a standard energetic and life cycle assessment framework with the further effort to deal with the multifunctional, scale-up and cost issues for emerging DAC technologies, while dynamic LCAs are needed to explore the effect of time variation parameters.

environmental studies,green & sustainable science & technology

Direct air capture: fledgling technology or world saviour?

Direct air capture: process technology, techno-economic and socio-political challenges

A Technological Review of Direct Air Carbon Capture and Storage (DACCS): Global Standing and Potential Application in Australia

Direct Air Capture: A Review of Carbon Dioxide Capture from the Air

Research on Current and Future Aspects of Direct Air Capture of CO2

From Lab to Fab: Development and Deployment of Direct Air Capture of CO2

Direct Air Capture (DAC) for Achieving Net-Zero CO2 Emissions: Advances, Applications, and Challenges

Direct Air Capture Technology and Its Application

Key uncertainties behind global projections of direct air capture deployment

Direct Air Capture of CO2: A Key Technology for Ambitious Climate Change Mitigation

Making Direct Air Capture Affordable; Technology, Market and Regulatory Approaches

Indoor CO2 direct air capture and utilization: Key strategies towards carbon neutrality

Direct air capture of CO2: from insights into the current and emerging approaches to future opportunities

Effects of Direct Air Capture Technology Availability on Stranded Assets and Committed Emissions in the Power Sector

Direct air capture multiscale modelling: From capture material optimization to process simulations

Electrochemical direct air capture and direct ocean capture: The next frontier in carbon removal

Recent advances in direct air capture by adsorption

Carbon dioxide separation and capture by adsorption: a review

A Comparative Study of Different Sorbents in the Context of Direct Air Capture (DAC): Evaluation of Key Performance Indicators and Comparisons

Development of sorbent materials for direct air capture of CO2

Energetic and Life Cycle Assessment of Direct Air Capture: A Review