Abstract:Acrylonitrile-modified aliphatic amine adducts are often used as curing agents for room-temperature epoxy formulations (coatings, adhesives, sealants, castings, etc.), yet the curing reaction and properties of resultant epoxy systems still remain less fundamentally understood. Herein we systematically investigate our newly-developed acrylonitrile-modified multifunctional polyamine curing agent for bisphenol A epoxy resin (DGEBA): an aciylonitrile-capped poly(propyleneimine) dendrimer (PAN4). The impact of the molecular structure of PAN4 and a controlled poly(propyleneimine) dendrimer (1.0GPPI) on the curing reactivity, reaction mechanisms, thermal stability, viscoelastic response and mechanical properties of the epoxy systems are highlighted. Differential scanning calorimetry (DSC) confirms DGEBA/PAN4 shows markedly lower reactivity and reaction exotherm than DGEBA/1.0GPPI, and the model-free isoconversional kinetic analysis reveals that DGEBA/PAN4 has the generally lower reaction activation energy. To be quantitative, the progress of the isothermal cure is predicted from the dynamic cure by using the Vyazovkin equation. The isothermal kinetic prediction shows that DGEBA/PAN4 requires about 10 times longer time to achieve the same conversion than DGEBA/1.0GPPI, which agrees with the experimentally observed much longer gel time of DGEBA/PAN4. Subsequently, dynamic mechanical analysis shows that PAN4 results in the cured epoxy network with the lower beta- and glass-relaxation temperatures, crosslink density, relaxation activation energy, enthalpy, entropy, but the higher damping near room temperature than 1.0GPPI. Finally, thermogravimetric analysis (TGA) demonstrates cured DGEBA/PAN4 is thermally stable up to 200 degrees C, and mechanical property tests substantiate that PAN4 endows the cured epoxy with much higher impact and adhesion strengths than 1.0GPPI. Our data can provide a deeper insight into acrylonitrile-modified aliphatic amine curing agents from the two good model compounds (PAN4 and 1.0GPPI). (C) 2012 Elsevier B.V. All rights reserved.

Safety risk assessment of epoxy acrylate prepared by ring-opening esterification of epoxy resin and acrylic acid

Study on Synthesis and Thermal Property of Epoxy Resin Containing Naphthalene

Branched 1,6-Diaminohexane-derived Aliphatic Polyamine As Curing Agent for Epoxy: Isothermal Cure, Network Structure, and Mechanical Properties

Synthesis of Thermally Degradable Epoxy Adhesives

Nonisothermal Reaction, Thermal Stability and Dynamic Mechanical Properties of Epoxy System with Novel Nonlinear Multifunctional Polyamine Hardener

Acrylonitrile-Capped Poly(Propyleneimine) Dendrimer Curing Agent for Epoxy Resins: Model-Free Isoconversional Curing Kinetics, Thermal Decomposition and Mechanical Properties

Model-Fitting and Model-Free Nonisothermal Curing Kinetics of Epoxy Resin with A Low-Volatile Five-Armed Starlike Aliphatic Polyamine

Thermal Safety and Overall Kinetics for Methyl Methacrylate Solution Polymerization via On-line Process Analytical Technology

Influence of the Reactive Conditions on Gel Content of Butyl Acrylate-co-Glycidyl Methacrylate Emulsion

Thermokinetic Analysis of the Stability of Acetic Anhydride Hydrolysis in Isothermal Calorimetry Techniques

Reaction mechanism and process safety assessment of acid-catalyzed synthesis of tert -butyl peracetate

A thermal hazard risk evaluation of emulsion polymerisation and vinyl acetate monomers in the latex manufacturing process

Thermokinetic Parameters Analysis and Incompatible Hazard Evaluation of Acrylonitrile by DSC

Assessment of the Thermal Hazard Characteristics of Three Low-Temperature Active Azo Initiators for Polymer Resin in Construction Industries under Adiabatic Conditions.

Process Hazard Assessment and Exothermic Mechanism of Propylene Glycol Butyl Ether Synthesis from Propylene Oxide

Process Safety Evaluation of the Synthesis of Tert-Butyl Peracetate

Ring-opening Reaction Research of Methyl Acrylic Glycidyl Ester

Deterministic modeling of non-adiabatic solution radical polymerization of n-butyl acrylate in light of runaway prevention

Preparation of n-Octadecane@MF resin microPCMs and its application in temperature control of esterification reactions

Process Hazard Evaluation and Thermal Runaway Prediction for Styrene Polymerization Initiated by Peroxide-Azo Composites

Thermal Hazard Characteristics of Unsaturated Polyester Resin Mixed with Hardeners