Ir-based bifunctional electrocatalysts for overall water splitting

Lin-Wei Chen,Hai-Wei Liang

DOI: https://doi.org/10.1039/d1cy00650a

2021-01-01

Abstract:The recent progress on Ir-based bifunctional electrocatalysts in enhancing the overall water splitting performance is reviewed mainly from the aspects of optimizing the composition and morphology.

chemistry, physical

What problem does this paper attempt to address?

Coupling Transition Metal Catalysts with Ir for Enhanced Electrochemical Water Splitting Activity

Xin Yang,Yan Liu,Ruike Guo,Jiafu Xiao

DOI: https://doi.org/10.1002/tcr.202200176

2022-08-27

Abstract:Recent progress of Ir coupled electrocatalysts for water splitting is systematically reviewed, including the crucial role of Ir played in promoting catalytic performance and many representative Ir coupled electrocatalysts in water splitting. Developing advanced electrocatalysts is of great significance for boosting electrochemical water splitting to produce hydrogen. The electrocatalytic activity of a catalyst is associated with the surface/interface, geometric structure, and electronic properties. Coupling Ir with transition metal compounds is an effective strategy to improve their electrocatalytic performance. In this review, we summarize the recent progress of Ir coupled transition metal compound catalysts for the application in driving electrochemical water splitting. The significant role of Ir played in the promotion of electrocatalytic performance is firstly illustrated. Then, the applications of Ir‐based catalysts in the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are comprehensively discussed, with an emphasis on correlating the structure‐function relationships. Lastly, the challenges and future directions for the fabrication of more advanced Ir coupled electrocatalysts are also presented.

chemistry, multidisciplinary
Intercalated Iridium Diselenide Electrocatalysts for Efficient Ph‐universal Water Splitting

Tingting Zheng,Chunyan Shang,Zhihai He,Xinyi Wang,Cong Cao,Hongliang Li,Rui Si,Bicai Pan,Shiming Zhou,Jie Zeng

DOI: https://doi.org/10.1002/anie.201909369

2019-01-01

Angewandte Chemie

Abstract:AbstractDeveloping bifunctional catalysts for both hydrogen and oxygen evolution reactions is a promising approach to the practical implementation of electrocatalytic water splitting. However, most of the reported bifunctional catalysts are only applicable to alkaline electrolyzer, although a few are effective in acidic or neutral media that appeals more to industrial applications. Here, a lithium‐intercalated iridium diselenide (Li‐IrSe2) is developed that outperformed other reported catalysts toward overall water splitting in both acidic and neutral environments. Li intercalation activated the inert pristine IrSe2 via bringing high porosities and abundant Se vacancies for efficient hydrogen and oxygen evolution reactions. When Li‐IrSe2 was assembled into two‐electrode electrolyzers for overall water splitting, the cell voltages at 10 mA cm−2 were 1.44 and 1.50 V under pH 0 and 7, respectively, being record‐low values in both conditions.
Iridium-based Nanomaterials for Electrochemical Water Splitting

Zhijie Chen,Xiaoguang Duan,Wei,Shaobin Wang,Bing-Jie Ni

DOI: https://doi.org/10.1016/j.nanoen.2020.105270

IF: 17.6

2020-01-01

Nano Energy

Abstract:Electrochemical water splitting is an appealing technology to produce high-purity hydrogen as a clean and sustainable energy carrier. The efficiency of water splitting largely depends on the intrinsic activity, selectivity, and stability of the electrocatalysts. Hence, soaring scientific endeavors have been made to develop high-performance electrocatalysts and uncover the underling reaction mechanisms. Iridium (Ir)-based nanomaterials are most promising for water splitting due to their favorable intrinsic activity, wide pH window, and high stability. In this review, we first discussed the mechanisms of various Ir-based catalysts in hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), including metal, alloys, and oxides. Important criteria and methods for precise evaluation of water splitting catalysts are discussed. Then, the applications of Ir-based nanomaterials in the HER, OER and the overall water splitting are comprehensively reviewed, with an emphasis on correlating the structure-function relationships and the advanced strategies for rational design of reaction-oriented Ir catalysts. Lastly, the current challenges in fundamental studies and future directions in this field are presented.
Iridium-Based Multimetallic Porous Hollow Nanocrystals for Efficient Overall-Water-Splitting Catalysis

Jianrui Feng,Fan Lv,Weiyu Zhang,Peihao Li,Kai Wang,Chao Yang,Bin Wang,Yong Yang,Jinhui Zhou,Fei Lin,Gui-Chang Wang,Shaojun Guo

DOI: https://doi.org/10.1002/adma.201703798

IF: 29.4

2017-01-01

Advanced Materials

Abstract:The development of active and durable bifunctional electrocatalysts for overall water splitting is mandatory for renewable energy conversion. This study reports a general method for controllable synthesis of a class of IrM (M = Co, Ni, CoNi) multimetallic porous hollow nanocrystals (PHNCs), through etching Ir-based, multimetallic, solid nanocrystals using Fe3+ ions, as catalysts for boosting overall water splitting. The Ir-based multimetallic PHNCs show transition-metal-dependent bifunctional electrocatalytic activities for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in acidic electrolyte, with IrCo and IrCoNi PHNCs being the best for HER and OER, respectively. First-principles calculations reveal a ligand effect, induced by alloying Ir with 3d transition metals, can weaken the adsorption energy of oxygen intermediates, which is the key to realizing much-enhanced OER activity. The IrCoNi PHNCs are highly efficient in overall-water-splitting catalysis by showing a low cell voltage of only 1.56 V at a current density of 2 mA cm-2 , and only 8 mV of polarization-curve shift after a 1000-cycle durability test in 0.5 m H2 SO4 solution. This work highlights a potentially powerful strategy toward the general synthesis of novel, multimetallic, PHNCs as highly active and durable bifunctional electrocatalysts for high-performance electrochemical overall-water-splitting devices.
Transition metal-based electrocatalysts for overall water splitting

Xiao-Peng Li,Can Huang,Wen-Kai Han,Ting Ouyang,Zhao-Qing Liu

DOI: https://doi.org/10.1016/j.cclet.2021.01.047

IF: 9.1

2021-09-01

Chinese Chemical Letters

Abstract:Electrochemical overall water splitting is attracting a broad focus as a promising strategy for converting the electrical output of renewable resources into chemical fuels, specifically oxygen and hydrogen. However, the urgent challenge in water electrolysis is to search for low-cost, high-efficiency catalysts based on earth-abundant elements as an alternative to the high-cost but effective noble metal-based catalysts. The transition metal-based catalysts are more appealing than the noble metal catalysts because of its low cost, high performance and long stability. Some recent advances for the development in overall water splitting are reviewed in terms of transition metal-based oxides, carbides, phosphides, sulfides, and hybrids of their mixtures as hybrid bifunctional electrocatalysts. Concentrating on different catalytic mechanisms, recent advances in their structural design, controllable synthesis, mechanistic insight, and performance-enhancing strategies are proposed. The challenges and prospects for the future development of transition metal-based bifunctional electrocatalysts are also addressed.

chemistry, multidisciplinary
Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Li Quan,Hui Jiang,Guoliang Mei,Yujie Sun,Bo You

DOI: https://doi.org/10.1021/acs.chemrev.3c00332

IF: 62.1

2024-03-23

Chemical Reviews

Abstract:Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering...

chemistry, multidisciplinary
Ultrathin Ir nanowires as high-performance electrocatalysts for efficient water splitting in acidic media.

Fulin Yang,Luhong Fu,Gongzhen Cheng,W. Luo

DOI: https://doi.org/10.1039/c7nr09377b

IF: 6.7

2018-01-25

Nanoscale

Abstract:The search for active and stable bifunctional electrocatalysts toward acidic overall water splitting is under increasing demand for the development of polymer electrolyte membrane (PEM) electrolyzers. However, developing bifunctional electrocatalysts with Pt-like activity and superior stability under acidic media still remains a big challenge. Herein, we report a successful synthesis of Ir wavy nanowires with an ultrathin diameter of 1.7 nm through a simple wet-chemical approach. Benefiting from the unique morphology with high aspect ratios and a large specific surface area, the as-synthesized ultrathin Ir wavy nanowires exhibit enhanced activity and durability for both the oxygen evolution reaction and the hydrogen evolution reaction in acidic electrolytes. Moreover, when used for overall acidic water splitting, a current density of 10 mA cm-2 is achieved at only a cell voltage of 1.62 V in 0.1 M HClO4 electrolyte with long-term stability. In view of the excellent electrochemical water splitting performance and superior stability in acidic electrolytes, we believe that the obtained Ir wavy nanowires could be potential alternative catalysts toward PEM water electrolysis.

Chemistry,Medicine,Engineering,Materials Science
Self-Adaptive Dual-Site Synergy with an Optimized Electronic Configuration for Overall Water Splitting in Acidic Media

Yu-Ru Lin,Chun-Kuo Peng,Yu-Chang Lin,Hsiang-Chun Yu,Chao-Lung Chiang,Suh-Ciuan Lim,San-Yuan Chen,Yan-Gu Lin

DOI: https://doi.org/10.1021/acssuschemeng.3c03306

IF: 8.4

2023-08-20

ACS Sustainable Chemistry & Engineering

Abstract:In harsh acidic environments, there remains a demand for catalysts that possess both high activity and stability, enabling them to efficiently enhance the slow kinetics of the hydrogen evolution reaction and oxygen evolution reaction, which are crucial for the advancement of proton exchange membrane water electrolyzers. Herein, a bifunctional electrocatalyst was designed by synergistically modulating the electronic and coordination properties. The IrO x /MnO x catalyst was successfully created, surpassing the activity and stability limitations of IrO2 catalysts for acidic overall water splitting, thereby pushing the boundaries of electrocatalytic performance. When used as both electrodes in an overall water-splitting cell, the IrO x /MnO x catalyst achieved a current density of 10 mA cm–2 at 1.51 V for 36 h without any noticeable degradation, which greatly outperformed the commercial couples (Pt/C||IrO2, 1.65 V) in acidic media. Of greater significance, X-ray absorption spectroscopy deciphered that the unsaturated Ir centers, which have an electron-rich nature, can lower energy barriers associated with the proton adsorption and desorption and oxygenated reactant species through a self-adaptive surface reconstruction process. This work introduces an approach to boost the intrinsic performance of catalysts for overall water splitting by constructing unsaturated coordination centers, offering a promising strategy for catalyst design.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
IrPd Nanoalloy‐Structured Bifunctional Electrocatalyst for Efficient and pH‐Universal Water Splitting

Xing Yang,Zihe Wu,Zhenyu Xing,Chengdong Yang,Weiwen Wang,Rui Yan,Chong Cheng,Tian Ma,Zhiyuan Zeng,Shuang Li,Changsheng Zhao

DOI: https://doi.org/10.1002/smll.202208261

IF: 13.3

2023-04-05

Small

Abstract:The electronic state of Ir in Ir44Pd56/KB is adjusted by introducing Pd to achieve an efficient and durable bifunctional electrocatalyst for both hydrogen and evolution reactions. The equipped anion exchange membrane electrolyzer shows a continuous H2 production stability of >20 h at a current of 250 mA cm−2, indicating promising potential for practical applications. The lack of high efficiency and pH‐universal bifunctional electrocatalysts for water splitting to hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) hinders the large‐scale production of green hydrogen. Here, an IrPd electrocatalyst supported on ketjenblack that exhibits outstanding bifunctional performance for both HER and OER at wide pH conditions is presented. The optimized IrPd catalyst exhibits a specific activity of 4.46 and 3.98 A mgIr−1 in the overpotential of 100 and 370 mV for HER and OER, respectively, in alkaline conditions. When applied to the anion exchange membrane electrolyzer, the Ir44Pd56/KB catalyst shows a stability of >20 h at a current of 250 mA cm−2 for water decomposition, indicating promising prospects for practical applications. Beyond offering an advanced electrocatalyst, this work also guides the rational design of desirable bifunctional electrocatalysts for HER and OER by regulating the microenvironments and electronic structures of metal catalytic sites for diverse catalysis.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Iridium–Tungsten Alloy Nanodendrites as pH-Universal Water-Splitting Electrocatalysts

Fan Lv,Jianrui Feng,Kai Wang,Zhipeng Dou,Weiyu Zhang,Jinhui Zhou,Chao Yang,Mingchuan Luo,Yong Yang,Yingjie Li,Peng Gao,Shaojun Guo

DOI: https://doi.org/10.1021/acscentsci.8b00426

IF: 18.2

2018-08-29

ACS Central Science

Abstract:The development of highly efficient and durable electrocatalysts for high-performance overall water-splitting devices is crucial for clean energy conversion. However, the existing electrocatalysts still suffer from low catalytic efficiency, and need a large overpotential to drive the overall water-splitting reactions. Herein, we report an iridium-tungsten alloy with nanodendritic structure (IrW ND) as a new class of high-performance and pH-universal bifunctional electrocatalysts for hydrogen and oxygen evolution catalysis. The IrW ND catalyst presents a hydrogen generation rate ∼2 times higher than that of the commercial Pt/C catalyst in both acid and alkaline media, which is among the most active hydrogen evolution reaction (HER) catalysts yet reported. The density functional theory (DFT) calculations reveal that the high HER intrinsic catalytic activity results from the suitable hydrogen and hydroxyl binding energies, which can accelerate the rate-determining step of the HER in acid and alkaline media. Moreover, the IrW NDs show superb oxygen evolution reaction (OER) activity and much improved stability over Ir. The theoretical calculation demonstrates that alloying Ir metal with W can stabilize the formed active iridium oxide during the OER process and lower the binding energy of reaction intermediates, thus improving the Ir corrosion resistance and OER kinetics. Furthermore, the overall water-splitting devices driven by IrW NDs can work in a wide pH range and achieve a current density of 10 mA cm<sup>-2</sup> in acid electrolyte at a low potential of 1.48 V.

chemistry, multidisciplinary
General Formation of Monodisperse IrM (M = Ni, Co, Fe) Bimetallic Nanoclusters as Bifunctional Electrocatalysts for Acidic Overall Water Splitting

Yecan Pi,Qi Shao,Pengtang Wang,Jun Guo,Xiaoqing Huang

DOI: https://doi.org/10.1002/adfm.201700886

IF: 19

2017-05-16

Advanced Functional Materials

Abstract:The development of bifunctional electrocatalysts for overall water splitting in acidic media is vital for polymer electrolyte membrane (PEM) electrolyzers, but still full of obstacles. Here, highly efficient acidic overall water splitting is realized by utilizing ultrasmall, monodispersed Iridium (Ir)‐based nanoclusters (NCs) as the candidate, via a surfactant‐free, wet‐chemical, and large‐scalable strategy. Benefiting from the high specific surface area, clean surface, and strong binding between NCs and supports, the IrM NCs exhibit attractive activities and durability for both oxygen evolution reaction and hydrogen evolution reaction in acidic electrolytes, with IrNi NCs showing the best performance. More significantly, in the overall water splitting, IrNi NCs reach 10 mA cm −2 at a cell voltage of only 1.58 V in 0.5 m H 2 SO 4 electrolyte, holding promises for potential implementation of PEM water electrolysis. This work opens a new avenue toward designing bifunctional “acidic stable” catalysts for efficient overall water splitting.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Atomically Ordered Ir3Ti Intermetallics for pH-Universal Overall Water Splitting

Jianing Song,Caihong He,Chaoqun Ma,Jing Xia,Fukai Feng,Xiao Ma,Sumei Han,Huaifang Zhang,Yuanqiang Yang,Banggao Li,Qipeng Lu,Wenbin Cao,Lijie Zhu

DOI: https://doi.org/10.1039/d4ta02304h

IF: 11.9

2024-06-12

Journal of Materials Chemistry A

Abstract:Developing an efficient bifunctional electrocatalyst for overall water splitting under all pH conditions is challenging. Ir-based materials are promising electrocatalysts, but the high cost and limited reserves of Ir restrict its widespread applications. Alloying Ir with 3d transition metal to produce ordered intermetallic compounds (IMCs) is a well-established strategy aimed at diminishing the reliance on Ir and enhancing electrocatalytic activity. In this work, we synthesize Ir3Ti IMCs on carbon nanotubes (i.e. Ir3Ti/CNT), which exhibits remarkable performances in both HER and OER across a broad pH range. Specifically, Ir3Ti/CNT as both anode and cathode delivers the current density of 10 mA cm−2 at low cell voltages of 1.51 V and 1.52 V in 0.5 M H2SO4 and 1.0 M KOH, respectively. The density functional theory (DFT) calculations further demonstrate that alloying Ir with Ti atoms establishes the electron-rich environment for Ir atoms and regulates the adsorption energy of reaction intermediates on the surface of Ir3Ti IMCs. Consequently, the energy barriers for overall water splitting are reduced and the electrocatalytic activities are improved. This study presents a compelling strategy for constructing advanced noble metal-based electrocatalysts with high efficiency, long-term stability, and pH-universality for overall water splitting.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Iridium in Tungsten Trioxide Matrix as an Efficient Bi‐Functional Electrocatalyst for Overall Water Splitting in Acidic Media

Pengsong Li,Xinxuan Duan,Yun Kuang,Xiaoming Sun

DOI: https://doi.org/10.1002/smll.202102078

IF: 13.3

2021-10-05

Small

Abstract:Electrocatalytic water splitting in acidic media is a promising strategy for grid scale production of hydrogen using renewable energy, but challenges still exist in the development of advanced catalysts with both high activity and stability. Herein, it is reported that iridium doped tungsten trioxide (Ir-doped WO3) with arrayed structure and confined Ir sites is an efficient and durable bi-functional catalyst for overall acidic water splitting. A low overpotential (258 mV) is required to achieve an oxygen evolution reaction current density of 10 mA cm−2 in 0.5 m H2SO4 solution. Meanwhile, Ir-doped WO3 processes a similar intrinsic activity to Pt/C toward hydrogen evolution reaction. Overall water splitting using the bi-functional Ir-doped WO3 catalyst shows low cell voltages of 1.56 and 1.68 V to drive the current densities of 10 and 100 mA cm−2, respectively, with only 16 mV decay observed after 60 h continuous electrolysis under the current density of 100 mA cm−2. Structural analysis and density functional theory calculation indicate that the adjusted coordination environment of Ir within the crystalline matrix of WO3 contributes to the high activity and durability.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Partial Exsolution Enables Superior Bifunctionality of Ir@SrIrO3 for Acidic Overall Water Splitting

Ling Zhao,Zetian Tao,Maosheng You,Huangwei Xiao,Sijiao Wang,Wenjia Ma,Yonglong Huang,Beibei He,Qi Chen

DOI: https://doi.org/10.1002/advs.202309750

IF: 15.1

2024-04-04

Advanced Science

Abstract:An Ir@SrIrO3 heterojunction with strong metal‐support interaction is prepared by a top‐down partial exsolution strategy for acidic overall water splitting. Thanks to interfacial electronic redistribution and reduced energy barriers for oxygen evolution reaction and hydrogen evolution reaction, this advanced electrocatalyst achieves high bifunctional activity and good durability, showing great promise for commercial application. The pursuit of efficient and durable bifunctional electrocatalysts for overall water splitting in acidic media is highly desirable, albeit challenging. SrIrO3 based perovskites are electrochemically active for oxygen evolution reaction (OER), however, their inert activities toward hydrogen evolution reaction (HER) severely restrict the practical implementation in overall water splitting. Herein, an Ir@SrIrO3 heterojunction is newly developed by a partial exsolution approach, ensuring strong metal‐support interaction for OER and HER. Notably, the Ir@SrIrO3‐175 electrocatalyst, prepared by annealing SrIrO3 in 5% H2 atmosphere at 175 °C, delivers ultralow overpotentials of 229 mV at 10 mA cm−2 for OER and 28 mV at 10 mA cm−2 for HER, surpassing most recently reported bifunctional electrocatalysts. Moreover, the water electrolyzer using the Ir@SrIrO3‐175 bifunctional electrocatalyst demonstrates the potential application prospect with high electrochemical performance and excellent durability in acidic environment. Theoretical calculations unveil that constructing Ir@SrIrO3 heterojunction regulates interfacial electronic redistribution, ultimately enabling low energy barriers for both OER and HER.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Heterostructured Ultrathin Two-Dimensional Co-FeOOH Nanosheets@1D Ir-Co(OH)F Nanorods for Efficient Electrocatalytic Water Splitting

Zichen Xu,Yuanjuan Jiang,Jeng-Lung Chen,Ryan Yeh-Yung Lin

DOI: https://doi.org/10.1021/acsami.2c22632

2023-04-05

Abstract:It is highly desirable to develop high-performance and robust electrocatalysts for overall water splitting, as the existing electrocatalysts exhibit poor catalytic performance toward hydrogen and oxygen evolution reactions (HER and OER) in the same electrolytes, resulting in high cost, low energy conversion efficiency, and complicated operating procedures. Herein, a heterostructured electrocatalyst is realized by growing Co-ZIF-67-derived 2D Co-doped FeOOH on 1D Ir-doped Co(OH)F nanorods, denoted as Co-FeOOH@Ir-Co(OH)F. The Ir-doping couples with the synergy between Co-FeOOH and Ir-Co(OH)F effectively modulate the electronic structures and induce defect-enriched interfaces. This bestows Co-FeOOH@Ir-Co(OH)F with abundant exposed active sites, accelerated reaction kinetics, improved charge transfer abilities, and optimized adsorption energies of reaction intermediates, which ultimately boost the bifunctional catalytic activity. Consequently, Co-FeOOH@Ir-Co(OH)F exhibits low overpotentials of 192/231/251 and 38/83/111 mV at current densities of 10/100/250 mA cm-2 toward the OER and HER in a 1.0 M KOH electrolyte, respectively. When Co-FeOOH@Ir-Co(OH)F is used for overall water splitting, cell voltages of 1.48/1.60/1.67 V are required at current densities of 10/100/250 mA cm-2. Furthermore, it possesses outstanding long-term stability for OER, HER, and overall water splitting. Our study provides a promising way to prepare advanced heterostructured bifunctional electrocatalysts for overall alkaline water splitting.
Coordination Engineering of Iridium Nanocluster Bifunctional Electrocatalyst for Highly Efficient and Ph-Universal Overall Water Splitting

Qilun Wang,Cong-Qiao Xu,Wei Liu,Sung-Fu Hung,Hong Bin Yang,Jiajian Gao,Weizheng Cai,Hao Ming Chen,Jun Li,Bin Liu

DOI: https://doi.org/10.1038/s41467-020-18064-w

IF: 16.6

2020-01-01

Nature Communications

Abstract:Water electrolysis offers a promising energy conversion and storage technology for mitigating the global energy and environmental crisis, but there still lack highly efficient and pH-universal electrocatalysts to boost the sluggish kinetics for both cathodic hydrogen evolution reaction (HER) and anodic oxygen evolution reaction (OER). Herein, we report uniformly dispersed iridium nanoclusters embedded on nitrogen and sulfur co-doped graphene as an efficient and robust electrocatalyst for both HER and OER at all pH conditions, reaching a current density of 10 mA cm −2 with only 300, 190 and 220 mV overpotential for overall water splitting in neutral, acidic and alkaline electrolyte, respectively. Based on probing experiments, operando X-ray absorption spectroscopy and theoretical calculations, we attribute the high catalytic activities to the optimum bindings to hydrogen (for HER) and oxygenated intermediate species (for OER) derived from the tunable and favorable electronic state of the iridium sites coordinated with both nitrogen and sulfur.
Boride-based Electrocatalysts: Emerging Candidates for Water Splitting

Zhijie Chen,Xiaoguang Duan,Wei,Shaobin Wang,Zejie Zhang,Bing-Jie Ni

DOI: https://doi.org/10.1007/s12274-020-2618-y

IF: 9.9

2020-01-01

Nano Research

Abstract:Electrocatalytic water splitting (EWS) is a promising route to produce hydrogen in a sustainable and environment-benign manner. To realize the large-scale hydrogen production, it is paramount to develop desirable electrocatalysts with engineered structure, high catalytic activity, facile accessibility, low cost, and good durability. Of late, boride-based materials, especially transition-metal borides (TMBs), are emerging as promising candidates for the EWS process. However, so far, little attempt has been made to provide a comprehensive summary on these findings. Herein, this review provides the up-to-date status on upgrading the catalytic performance of TMB-based nanomaterials by regulating the internal and external characteristics. The conventional synthetic techniques are first presented for the preparation of TMB-based catalysts. Afterwards, the advanced strategies are summarized to enhance the catalytic performance of TMBs, including morphology control, component regulation, phase engineering, surface oxidation and hybridization. Then, the design principles of TMB-based electrocatalysts for high-performance EWS are outlined. Lastly, the current challenges and future directions in the development of TMB-based materials are proposed. This review article is expected to envisage insights into the TMBs-based water splitting and to provide strategies for design of the next-generation TMB-based electrocatalysts.
Ir Cluster-Decorated Carbon Composite as Bifunctional Electrocatalysts for Acidic Stable Overall Water Splitting

Wenjuan Cao,Yuan Xu,Zeming Wang,Jiayang Luo,Muhammad Arif Khan,Lei Zhang,Daixin Ye,Hongbin Zhao,Jiujun Zhang

DOI: https://doi.org/10.1149/1945-7111/ab9b0c

IF: 3.9

2020-01-01

Journal of The Electrochemical Society

Abstract:In this paper, the bifunctional Ir cluster-decorated carbon Composite (Ir/C-1) electrocatalysts for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) are synthesized through simple in-situ growth of bimetallic Zn-Ir-MOF, followed by Zn reduction and evaporation for creating pore structure and uniform particle distribution. The prepared catalyst of Ir/C-1 with Ir cluster (d = 3 +/- 0.1 nm) highly dispersed and closely attached to pore carbon through Ir-O-C bonds shows both excellent OER and HER performance. At a current density of 10 mA cm(-2), the catalyst shows overpotentials of only 50.4 mV for HER and 359 mV for OER in 0.5 M H2SO4, respectively, which are better than commercial Ir/C and Pt/C catalysts. Density functional theory (DFT) calculations further revealed that the exposure of Ir (110) in Ir/C-1 can facilitate the thermodynamic process of HER and OER. This paper also gives a detailed discussion about the enhancement mechanism. To validate the catalyst, a single electrolysis cell is assembled using the prepared Ir/C-1 catalyst as both the anode and cathode catalysts. The result shows that the cell only needs a cell voltage of 1.653 V to obtain a current density of 10 mA cm(-2), which is better than commercial Ir/C and Pt/C catalysts. (C) 2020 The Electrochemical Society ("ECS"). Published on behalf of ECS by IOP Publishing Limited.
Recent advances of two-dimensional nanomaterials as bifunctional electrocatalysts for full water splitting.

Cui Xu,Mengyang Zhang,Xianjun Yin,Qiang Gao,Shuai Jiang,Junye Cheng,Xin Kong,Bin Liu,Hui-Qing Peng

DOI: https://doi.org/10.1039/d3ta02293e

IF: 11.9

2023-08-12

Journal of Materials Chemistry A

Abstract:Two-dimensional (2D) nanomaterials are one of the most promising bifunctional electrocatalysts that can simultaneously catalyze hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). They have aroused intensive attention owing to their decent electrocatalytic performance and cost advantages. In this review, we first provide an overview of the 2D bifunctional electrocatalysts categories including layered double hydroxides, graphitic carbon nitride, metal-organic frameworks, transition metal dichalcogenides, and transition metal carbon/nitrogen compounds, and discuss their structures and synthesis methods, presenting detailed discussions on how the special 2D systems are synthesized and characterized experimentally, which complement a comprehensive understanding of the characteristics of 2D bifunctional electrocatalysts. Moreover, we focus on the recent development of 2D nanocatalysts with both HER and OER activity in the field of overall water splitting and summarize some typical strategies for enhancing the bifunctional activities, including doping, nanocomposite heterostructure construction, interface formation, defect engineering, and morphology modulation. The structure-activity relationships are also discussed with the aim of providing guidance in designing novel 2D bifunctional electrocatalysts. Finally, we explore some of the challenges and perspectives that remain in this rapidly growing field. We believe that the systematic and comprehensive contents of this review will stimulate wider research and attention.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Recent Advances in Transition-Metal-sulfide-based Bifunctional Electrocatalysts for Overall Water Splitting

Min Wang,Li Zhang,Yijia He,Hongwei Zhu

DOI: https://doi.org/10.1039/d0ta12152e

IF: 11.9

2021-01-01

Journal of Materials Chemistry A

Abstract:Hydrogen produced via water electrolysis can act as an ideal clean chemical fuel with superb gravimetric energy density and high energy conversion efficiency, solving the problems of conventional fossil fuel exhaustion and environmental contamination. Transition metal sulfides (TMS) have been extensively explored as effective, widely available alternatives to precious metals in overall water splitting. Herein, recent advances, covering preparation methods, intrinsic electrocatalytic performance, and optimization strategies, relating to TMS-based bifunctional electrocatalysts have been summarized systematically and comprehensively. Firstly, a general introduction to the reaction mechanisms and key parameters of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is provided. Next, the physicochemical properties of TMS and typical synthesis methods are introduced to give guidance for fabricating TMS materials with well-defined structures, controllable compositions, and excellent performance. Importantly, the intrinsic activities of TMS-based electrocatalysts and several strategies for improving their bifunctional electrocatalytic performance during water electrolysis are discussed in detail. Finally, perspectives covering the challenges and opportunities related to the further development of TMS-based materials with high activity and long-term durability for overall water splitting are given. The aim herein is to provide guidelines for the design and fabrication of TMS-based bifunctional electrocatalysts with excellent performance and to accelerate their large-scale practical application in water electrolysis.

Ir-based bifunctional electrocatalysts for overall water splitting

Coupling Transition Metal Catalysts with Ir for Enhanced Electrochemical Water Splitting Activity

Intercalated Iridium Diselenide Electrocatalysts for Efficient Ph‐universal Water Splitting

Iridium-based Nanomaterials for Electrochemical Water Splitting

Iridium-Based Multimetallic Porous Hollow Nanocrystals for Efficient Overall-Water-Splitting Catalysis

Transition metal-based electrocatalysts for overall water splitting

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Ultrathin Ir nanowires as high-performance electrocatalysts for efficient water splitting in acidic media.

Self-Adaptive Dual-Site Synergy with an Optimized Electronic Configuration for Overall Water Splitting in Acidic Media

IrPd Nanoalloy‐Structured Bifunctional Electrocatalyst for Efficient and pH‐Universal Water Splitting

Iridium–Tungsten Alloy Nanodendrites as pH-Universal Water-Splitting Electrocatalysts

General Formation of Monodisperse IrM (M = Ni, Co, Fe) Bimetallic Nanoclusters as Bifunctional Electrocatalysts for Acidic Overall Water Splitting

Atomically Ordered Ir3Ti Intermetallics for pH-Universal Overall Water Splitting

Iridium in Tungsten Trioxide Matrix as an Efficient Bi‐Functional Electrocatalyst for Overall Water Splitting in Acidic Media

Partial Exsolution Enables Superior Bifunctionality of Ir@SrIrO3 for Acidic Overall Water Splitting

Heterostructured Ultrathin Two-Dimensional Co-FeOOH Nanosheets@1D Ir-Co(OH)F Nanorods for Efficient Electrocatalytic Water Splitting

Coordination Engineering of Iridium Nanocluster Bifunctional Electrocatalyst for Highly Efficient and Ph-Universal Overall Water Splitting

Boride-based Electrocatalysts: Emerging Candidates for Water Splitting

Ir Cluster-Decorated Carbon Composite as Bifunctional Electrocatalysts for Acidic Stable Overall Water Splitting

Recent advances of two-dimensional nanomaterials as bifunctional electrocatalysts for full water splitting.

Recent Advances in Transition-Metal-sulfide-based Bifunctional Electrocatalysts for Overall Water Splitting