Abstract:Polymer based piezoelectric composite has attracted much attention in recent years due to its applicability in the manufacture of piezoelectric nanogenerators and sensors, high piezoelectric performance, high flexibility and easily shaping properties. In this work, ZnO with good piezoelectric properties was grown on the exfoliated MoS2 nanosheets by employing in situ polymerization, which was then incorporated in PVDF to prepare PVDF/ MoS2@ZnO piezoelectric composite film. The effect of various contents of ZnO on its structure and properties was emphatically discussed, as well as the mechanical energy collection and sensing performance. The results show that ZnO has been deposited on the surface of MoS2 nanosheet to form heterostructure (MoS2@ZnO), as well as that the MoS2@ZnO can effectively promote the transformation from alpha phase to beta phase in PVDF, by which the content of beta phase can be increased from 6.2 +/- 2.5 % to 54.3 +/- 2.7 %. It also exhibits excellent mechanical performance and flexibility with the tensile strengthen of 37.64 +/- 5.12 MPa and elongation at break of 9.77 +/- 1.57 %. The longitudinal piezoelectric constant (d(33)) of the composite film reached a maximum value of 31 +/- 4 pC.N-1. The open-circuit voltage (V-OC) and short-circuit current (I-SC) of PVDF/MoS2@ZnO piezoelectric composite film reach as high as 6.22 V and 528 nA under the acting force of 100 KPa, respectively. It can charge a 1.0 mu F commercial capacitor to 1.81 V in 400 s. Finally, a flexible piezoelectric sensor was fabricated to collect the pressure signals induced from human body movement (the bending of fingers, wrists and elbow joints), presenting excellent sensitive piezoelectric response with the V-OC of about 0.41 V, 0.22 V and 0.32 V, respectively. The found performance indicates its feasibility for the application in wearable intelligent devices.

Synergetic effect of MXene/MoS 2 heterostructure and gradient multilayer for highly sensitive flexible piezoelectric sensor

Hierarchically Structured Hollow PVDF Nanofibers for Flexible Piezoelectric Sensor

PAN/MXene/ZnS:Cu Composites fibers with Enhanced Piezoelectric and Energy Storage Performance for Development of Flexible Piezoelectric Sensors

Piezoelectric Polyacrylonitrile Nanofiber Film-Based Dual-Function Self-Powered Flexible Sensor.

Flexible piezoelectric sensor based on Polyacrylonitrile/MWCNT/MXene composites films for human physiological health detection

A Highly Flexible and Sensitive Piezoresistive Sensor Based on MXene with Greatly Changed Interlayer Distances.

Lightweight, Flexible and Highly Sensitive Segregated Microcellular Nanocomposite Piezoresistive Sensors for Human Motion Detection

Microstructured hybrid nanocomposite flexible piezoresistive sensor and its sensitivity analysis by mechanical finite-element simulation

Flexible piezoelectric sensor based on MXene/PAN/TPU composite films for human motion monitoring

Recent Advances in Multi‐Scale Piezoresistive Interfaces for MXene‐Based Flexible Sensors

Flexible and high-sensitivity piezoresistive sensor based on MXene composite with wrinkle structure

Recent Advances in Multi-Scale Piezoresistive Interfaces for MXene-Based Flexible Sensors

Two-dimension MXene Nanosheets on Nano-scale Fibrils in Hierarchical Porous Structure to Achieve Ultra-high Sensitivity

Incorporation of ZnO Encapsulated MoS2 to Fabricate Flexible Piezoelectric Nanogenerator and Sensor

3D hybrid porous Mxene-sponge network and its application in piezoresistive sensor

Flexible piezoelectric sensor based on polyvinylidene fluoride/polyacrylonitrile/carboxy-terminated multi-walled carbon nanotube composite films for human motion monitoring

A Highly Sensitive Piezoresistive Sensor Based on MXenes and Polyvinyl Butyral with a Wide Detection Limit and Low Power Consumption

Widening the Sensing Range of Piezoresistive Composites by Constructing Multilevel Porous Structure

A highly sensitive piezoresistive sensor based on MXene and polyvinyl butyral with a wide detection limit and low power consumption

Flexible Self-Powered Friction Piezoelectric Sensor Based on Structured PVDF-Based Composite Nanofiber Membranes

Self-assembly of metal-organic framework (UIO-66-NO2) and MXene for wearable and high-performance flexible pressure sensor