Abstract:CONSPECTUS: To tackle the foreseen energy crisis and serious environmental problem caused by conventional energy resources, solar cells, or photovoltaics (PV), a technology that can directly convert sunlight to electricity has been considered to be one of the most important and cost-effective clean energy techniques that benefit the environment. So far, silicon-based PVs have dominated the market due to mature fabrication techniques and their relatively good power conversion efficiency (PCE) and excellent stability. In the past decades, metal halide perovskite PVs have been a major direction of current PV research owing to their intriguing optoelectronic performance. The record PCE of perovskite PV cells has unprecedently increased from an original 3.8 to 25.5%. The typical structure of a photovoltaic perovskite is ABX(3), where A refers to a monovalent cation such as methylammonium (MA(+)), cesium (Cs+), or formamidinium (FA(+)); B refers to a divalent cation such as Pb2+ or Sn2+; and X refers to a halide anion. In general, a perovskite PV device consists of an active layer of the perovskite absorber, which is connected by a hole-transporting layer (HTL) and an electron-transporting layer (ETL). In the beginning, the strategies to improve the PCEs mainly focused on developing an effective method to grow a smooth and continuous polycrystalline film. After the improvement of the baseline PCE of the perovskite PVs, various techniques were employed to reduce the defects of perovskite formed at grain boundaries and surfaces, further pushing the PCEs of perovskite PV devices to over 20%. In the meantime, the discovery of suitable and low-cost interfacial materials such as electron-transporting materials and hole-transporting materials has appealed to the attention of the perovskite research community to accelerate the commercialization of the perovskite PVs. In this Account, we start from our efforts to develop facile and effective fabrication strategies to obtain smooth and continuous polycrystalline perovskite thin films, including vapor-assisted and moisture-assisted perovskite crystal growth. The strategies and the in-depth mechanisms of preventing the formation of specific detrimental defects accumulated at grain boundaries or the surface are also portrayed by designing various passivation molecules with certain functional groups, such as carbonyl groups, amine groups, or sulfonic groups. Some systematically designed electron- or hole-transporting materials to improve the charge extraction and collection efficiency in perovskite PV devices are discussed as well. Finally, future perspectives for further enhancing the long-term stability and PCE are proposed to accelerate the commercialization of perovskite PV devices in the next decade.

Challenges and Perspectives toward Future Wide‐Bandgap Mixed‐Halide Perovskite Photovoltaics

Stable Wide-Bandgap Perovskite Solar Cells for Tandem Applications

Advances in Single‐Halogen Wide‐Bandgap Perovskite Solar Cells

Overcoming Phase Segregation in Wide‐Bandgap Perovskites: from Progress to Perspective

Issues of phase segregation in wide-bandgap perovskite

Advances on the Application of Wide Band‐Gap Insulating Materials in Perovskite Solar Cells

Blade‐Coated Mixed‐Halide Wide‐Bandgap Perovskite Photovoltaics: Progress and Challenges

Tailored Key Parameters of Perovskite for High-Performance Photovoltaics

Wide-Gap Perovskite Via Synergetic Surface Passivation and Its Application Toward Efficient Stacked Tandem Photovoltaics.

Defect Passivation and Carrier Management Via a Multifunctional Additive for Efficient and Stable Wide-Bandgap Perovskite Solar Cells with High Fill Factor

Additive engineering for efficient wide-bandgap perovskite solar cells with low open-circuit voltage losses

Defect engineering in wide-bandgap perovskites for efficient perovskite–silicon tandem solar cells

Potentials and Challenges Towards Application of Perovskite Solar Cells

Crystallization Regulation and Defect Passivation for Efficient Inverted Wide‐Bandgap Perovskite Solar Cells with over 21% Efficiency

Stabilizing Wide‐Bandgap Perovskite with Nanoscale Inorganic Halide Barriers for Next‐Generation Tandem Technology

Highly Efficient and Stable Wide-Bandgap Perovskite Solar Cells Via Strain Management

Overcoming Two Key Challenges in Monolithic Perovskite‐Silicon Tandem Solar Cell Development: Wide Bandgap and Textured Substrate—A Comprehensive Review

Efficient wide-bandgap perovskite photovoltaics with homogeneous halogen-phase distribution

Unlocking Voltage Potentials of Mixed‐Halide Perovskite Solar Cells via Phase Segregation Suppression

Inhomogeneous Halide Anions Distribution along Out-of-Plane Direction in Wide-Bandgap Perovskite Solar Cells and Its Effect on Open Circuit Voltage Loss and Phase Segregation

Recent Progress of Thin Crystal Engineering for Perovskite Solar Cells