Abstract:Metal anodes represent as a prime choice for the coming generation rechargeable batteries with high energy density. However, daunting challenges including electrode volume variation and inevitable side reactions preclude them from becoming a viable technology. Here, a facile replacement reaction was employed to fabricate a three-dimensional (3D) interdigitated metal/solid electrolyte composite electrode, which not only provides a stable host structure for buffering the volume change within the composite but also prevents side reactions by avoiding the direct contact between active metal and liquid electrolyte. As a proof-of-concept demonstration, a 3D interdigitated zinc (Zn) metal/solid electrolyte architecture was fabricated via a galvanic replacement reaction between Zn metal foil and indium (In) chloride solution followed by electrochemical activation, featuring the interdigitation between metallic Zn and amorphous indium hydroxide sulfate (IHS) with high Zn2+ conductivity (56.9 +/- 1.8 mS cm(-1)), large Zn2+ transference number (0.55), and high electronic resistivity [(2.08 +/- 0.01) x 10(3) Omega cm]. The as-designed Zn/IHS electrode sustained stable electrochemical Zn plating/stripping over 700 cycles with a record-low overpotential of 8 mV at 1 mA cm(-2) and 0.5 mAh cm(-2). More impressively, it displayed cycle-stable performance with low overpotential of 10 mV under ultrahigh current density and areal capacity (20 mA cm(-2), 20 mAh cm(-2)), which outperformed all the reported Zn metal electrodes in mild aqueous electrolyte. The fabrication of interdigitated metal/solid electrolyte was generalized to other metal pairs, including Zn/Sn and Zn/Co, which provide inspiration for next-generation Zn metal batteries with high energy density and reversibility.

Metal-Iodine and Metal-Bromine Batteries: A Review

Toward Sustainable Metal‐Iodine Batteries: Materials, Electrochemistry and Design Strategies

A Replacement Reaction Enabled Interdigitated Metal/Solid Electrolyte Architecture for Battery Cycling at 20 mA cm<SUP>-2</SUP> and 20 mAh cm<SUP>-2</SUP>

Holistic Optimization Strategies for Advanced Aqueous Zinc Iodine Batteries

Review of the I−/I3− Redox Chemistry in Zn-iodine Redox Flow Batteries

Metal Chloride Cathodes for Next-generation Rechargeable Lithium Batteries

Advancements in Aqueous Zinc-Iodine Batteries: A Review

Emerging strategies for the improvement of modifications in aqueous rechargeable zinc–iodine batteries: Cathode, anode, separator, and electrolyte

Aqueous Zinc‐Iodine Batteries: From Electrochemistry to Energy Storage Mechanism

Emerging Non-Lithium Ion Batteries

Accelerating the Electrochemical Kinetics of Metal-Iodine Batteries: Progress and Prospects

Challenges and Opportunities for Multivalent Metal Anodes in Rechargeable Batteries

Zinc-Bromine Batteries: Challenges, Prospective Solutions, and Future

Recent Progress on Rechargeable Zn‐X (X=S, Se, Te, I2, Br2) batteries

An Overview of Challenges and Strategies for Stabilizing Zinc Anodes in Aqueous Rechargeable Zn-Ion Batteries

Electrode Materials for Rechargeable Zinc-Ion and Zinc-Air Batteries: Current Status and Future Perspectives

Rechargeable Aqueous Zinc–Halogen Batteries: Fundamental Mechanisms, Research Issues, and Future Perspectives

Recent Progress and Perspectives on Aqueous Zn-based Rechargeable Batteries with Mild Aqueous Electrolytes

Recent Progress in the Design of Advanced Cathode Materials and Battery Models for High-Performance Lithium-X (X = O2 , S, Se, Te, I2 , Br2 ) Batteries

Recent progress on modification strategies of both metal zinc anode and manganese dioxide cathode materials for high-performance aqueous zinc-ion batteries