Abstract:Pneumatic submersible pump is a new type of drainage tool in farmland irrigation. The water supply at the pumping end of the submersible pump is sporadic with frequent no-load operation given the low water levels in most rural canals during summer. The change in water flow and pressure directly causes high turbine speed and thus leads to the runaway speed phenomenon, which seriously affects operational safety. A pneumatic control system based on metering-out control was proposed to prevent high turbine speed and minimize the consumption of the pneumatic submersible pump in irrigation and drainage. First, the pneumatic liquid level control system was designed to automatically adjust the pressure and flow of the submersible pump under no-load and load conditions. Second, the stability of the system was simulated by Advanced Modeling and Simulation Environment for Systems Engineering (AMESim), and the coupling relationship among turbine speed, inlet pressure, and flow rate was discussed with different metering-out flows. Finally, comparative experiments were conducted for verification. Simulation and experimental results show that under the no-load condition, when the inlet pressure reaches 0.2 Mpa, the rotating speed of the pneumatic submersible pump increases with the inlet pressure, and when the inlet pressure reaches 0.4 Mpa, the rotating speed of the pneumatic submersible pump remains approximately unchanged. When the outlet flow increases, the rotating speed of the pneumatic submersible pump also increases gradually; when the outlet flow is equal to the inlet flow, the rotating speed remains stable; when the inlet pressure is higher than 0.4 Mpa and the outflow flow is smaller than 18 m/h, the turbine speed can be less than 12000 r/min, which is lower than the critical runaway speed. Thus, the total power loss is not reduced. The control system solves the problem of runaway speed and realizes automatic speed control of the pneumatic submersible pump under the no-load condition. The proposed method provides wide application prospects and is suitable for discontinuous irrigation and drainage operation of rural canals.

Construction principle of automatic control system adjustable multi-engine drive water lift pump unit

Energy-Saving Trajectory Tracking Control of a Multi-Pump Multi-Actuator Hydraulic System.

Paralleling Hydraulic Control of Variable Frequency Motor and Valve for the Swing Mechanism of Segment Erector

Research on Proportional and Constant Power Control on Multiple Variable Displacement Pump Drive Hydraulic System

Energy-efficient asynchronous electric drive as a means of increasing the reliability and energy efficiency of pumping plants in the urban water supply system

Design of a New Energy-saving Hydraulic Pumping Unit with Variable Speed Control and Closed Oil Circuits

Development of Parallel-Connected Pump–valve-Coordinated Control Unit with Improved Performance and Efficiency

Advanced Valves and Pump Coordinated Hydraulic Control Design to Simultaneously Achieve High Accuracy and High Efficiency.

A novel cutterhead cascade control strategy for hybrid-driving tunnel boring machines

Velocity-tracking Control of the Variable-speed Controlled Hydraulic System: Using Compound Algorithm of PD & Feedforward-feedback Control

A Control Method to Balance the Efficiency and Reliability of a Time-Delayed Pump-Valve System

Research on Energy-saving Optimization of Parallel Pumping System

Design and Experimental Study on the Automatic Speed Control System of a Pneumatic Submersible Pump

Principle And Realization Of A 5-Phase Pm Bearingless Motor Drive

Pump/valves coordinate control of the independent metering system for mobile machinery

The Design and Analysis of a Hydro-Pneumatic Energy Storage Closed-Circuit Pump Control System with a Four-Chamber Cylinder

An induction machine‐based drive system and supervisory control for application to smart water‐pumped storage and networks

Vector control system of electric drive of grain machine conveyor

Research on Multi-Mode Control of Electro-Hydraulic Variable Displacement Pump Driven by Servo Motor

Algorithmic structure of control system of mine winder electric drive with a doubly-fed motor

A control method for linear permanent magnet electric submersible pumps in a modified integrated drive-motor system