Abstract:Continuous Fibre Reinforced Thermoplastic Composites (CFRTPCs) are becoming alternative materials to replace the conventional thermosetting polymers and metals due to excellent mechanical performance, recycling and potential used in lightweight structures. Fused deposition modelling (FDM) is a promising additive manufacturing technology and an alternative of conventional processes for the fabrication of CFRTPCs due to its ability to build functional parts having complex geometries. The mechanical properties of a built part depend on several process parameters. The aim of this study is to characterize the effect of build orientation, layer thickness and fibre volume content on the mechanical performance of 3D printed continuous fibre reinforced composites components manufactured by a desktop 3D printer. Tensile and three-point bending tests are carried out to determine the mechanical response of the printed specimens. SEM images of fractured surfaces are evaluated to determine the effects of process parameters on failure modes.It is observed that the effect of layer thickness of nylon samples on the mechanical performance is marginally significant. In addition, continuous fibre reinforced samples show higher strength and stiffness values than unreinforced ones. The results show that carbon fibre reinforced composites exhibit the best mechanical performance with higher stiffness and flat samples exhibit higher values of strength and stiffness than on-edge samples. Additionally, the results show that strength and stiffness increase as fibre volume content increases in most cases but, conversely, the level of increment in mechanical performance is moderate with continued rise in fibre content, particularly in the case of Kevlar® and glass fibres, due to weak bonding between the fibre/nylon layers as well as the presence of increased levels of defects. Finally, the practicality of the results is assessed by testing an evaluation structure.

Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication

Evolution of microstructure and thermo‐mechanical attributes of fiber reinforced polyamide during fused deposition modeling 3D printing: A comprehensive characterization study

Nanomaterials Reinforced Polymer Filament for Fused Deposition Modeling: A State-of-the-Art Review

Processing and mechanical characterization of short carbon fiber-reinforced epoxy composites for material extrusion additive manufacturing

Advanced Composite Materials Utilized in FDM/FFF 3D Printing Manufacturing Processes: The Case of Filled Filaments

Mechanical characteristics and failure morphology of FFF-printed poly lactic acid composites reinforced with carbon fibre, graphene and MWCNTs

Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling: Effect of process parameters on mechanical properties

Thermal, Tensile and Fatigue Behaviors of the PA6, Short Carbon Fiber-Reinforced PA6, and Continuous Glass Fiber-Reinforced PA6 Materials in Fused Filament Fabrication (FFF)

Dimensional Accuracy and Mechanical Properties of Chopped Carbon Reinforced Polymers Produced by Material Extrusion Additive Manufacturing

Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/PEEK and GF/PEEK

Anisotropic mechanical properties of oriented carbon fiber filled polymer composites produced with fused filament fabrication

Investigation on the Coalescence of Filaments in Fused Filament Fabrication Process for Amorphous Polyether Ketone Ketone for Varying Nozzle Diameters and Chamber Temperatures

Strain rate dependence of 3D printed continuous fiber reinforced composites

Process-structure-property analysis of short carbon fiber reinforced polymer composite via fused filament fabrication

Essential Nanostructure Parameters to Govern Reinforcement and Functionality of Poly(lactic) Acid Nanocomposites with Graphene and Carbon Nanotubes for 3D Printing Application

Parametric analysis of additively manufactured polymer nanocomposites: A experimental and multiscale study

Effects on the Thermo-Mechanical and Crystallinity Properties of Nylon 6,6 Electrospun Fibres Reinforced with One Dimensional (1D) and Two Dimensional (2D) Carbon

Hybrid Metal-Organic Frameworks/Carbon Fibers Reinforcements for Additively Manufactured Composites

Additive manufacturing of carbon nanocomposites for structural applications

Effect of Carbon Nanotube Reinforcement on Creep and Recovery Behavior of Additively Manufactured Polymers: An Experimental and Prediction Study

Processing Dynamics of 3D-Printed Carbon Nanotubes-Epoxy Composites