Abstract:The global trend toward decarbonization is inspiring researchers to search for low or even zero carbon fuels for internal combustion engines. Ammonia (NH3) is considered a potential alternative fuel to conventional gasoline and diesel without carbon emissions. Although it is not an ideal fuel for use in engines due to its poor combustion properties, the use of hydrogen (H-2), which has low ignition energy and can be decomposed from ammonia, as a combustion promoter can enhance its suitability for engine applications. A careful literature review indicates that the relatively few existing studies on NH3/H-2 engines and the uncertainty of the NH3/H-2 chemistry under typical high-temperature and high-pressure engine environments limit the determination of the ammonia-tohydrogen ratio. However, this question is important when converting an existing engine to ammonia operation because it is related to compression ratio determination, aftertreatment design, ECU mapping, and on-board hydrogen production rate requirements. In other words, this outstanding question would affect the simultaneous design of other accessory systems and the development of ammonia engines. To increase the knowledge of the hydrogen concentration in the fuel feed of ammonia fueled engines in the engine community, this study discusses this question from the perspective of laminar flame speed (LFS), because it is closely related to reactivity, diffusivity, and exothermicity, which is a macroscopic parameter of premixed combustion and directly affects the efficiency and emissions of spark ignition engines. Specifically, the required proportion of hydrogen blended with ammonia is determined by comparing the NH3/H-2 reaction time scale with the millisecond combustion time scale in typical engines. The results show that high temperature enhances the LFS of ammonia, hydrogen and their mixtures, while pressure has an inhibitory effect. In addition, increasing the compression ratio and avoiding fuel-lean operation are effective ways to improve the performance of ammonia combustion with less hydrogen. Considering the high required hydrogen consumption rate and the full load conditions that guarantee high combustion efficiency, off-road application may be a suitable scenario for ammonia-hydrogen engines. Before applying ammonia to automobiles, the technology for onboard hydrogen production should be effectively developed.

A review of performance and emissions of diesel engine operating on dual fuel mode with hydrogen as gaseous fuel

Combustion and emission characteristics of a hydrogen-diesel dual-fuel engine

Use of hydrogen in dual-fuel diesel engines

Effect of hydrogen–diesel dual-fuel usage on performance, emissions and diesel combustion in diesel engines

Experimental study on combustion characteristics of diesel–hydrogen dual-fuel engine

Progress in hydrogen enriched compressed natural gas (HCNG) internal combustion engines - A comprehensive review

A review on production and implementation of hydrogen as a green fuel in internal combustion engines

Exploring Hydrogen–Diesel Dual Fuel Combustion in a Light-Duty Engine: A Numerical Investigation

Computational Investigation of Combustion, Performance, and Emissions of a Diesel-Hydrogen Dual-Fuel Engine

Impact of the operational parameters of a dual fuel engine operating on a blend of Water Hyacinth biodiesel and Mesua ferrea biodiesel with hydrogen–A clean development mechanism

Experimental Investigation in Optimizing the Hydrogen Fuel on a Hydrogen Diesel Dual-Fuel Engine

Experimental investigation of the effect of hydrogen ratio on engine performance and emissions in a compression ignition single cylinder engine with electronically controlled hydrogen-diesel dual fuel system

The utilization of hydrogen in hydrogen/diesel dual fuel engine

A novel experimental performance and emission study on CRDI engine using hydrogenated and green biodiesels: A turbo powered engine with hydrogen dual fuel and ANN prediction approach

Study on the Effects of the Hydrogen Substitution Rate on the Performance of a Hydrogen–Diesel Dual-Fuel Engine under Different Loads

Hydrogen Enriched Ammonia Engines: Assessment of Hydrogen Concentration in the Fuel Feed from the Laminar Flame Speed Viewpoint

Hydrogen-diesel co-combustion characteristics, vibro-acoustics and unregulated emissions in EGR assisted dual fuel engine

Hydrogen and ammonia as a primary fuel – A critical review of production technologies, diesel engine applications, and challenges

An experimental investigation of effect on diesel engine performance and exhaust emissions of addition at dual fuel mode of hydrogen

Combustion, performance and emission analyses of a CI engine operating with renewable diesel fuels (HVO/FARNESANE) under dual-fuel mode through hydrogen port injection

Exploration of the dual fuel combustion mode on a direct injection diesel engine powered with hydrogen as gaseous fuel in port injection and diesel-diethyl ether blend as liquid fuel