Abstract:In the design of fusion reactors, determining radiation levels due to neutrons and photons (gammas) throughout the reactor and its surroundings is important. Radiation transport codes need to have accurate cross-section libraries in order to produce accurate results. The Fusion Evaluated Nuclear Data Library (FENDL) is an international effort coordinated by the International Atomic Energy Agency, Nuclear Data Section, that assembles a collection of the best nuclear data for fusion applications. In the current FENDL-3.1d data library, neutron cross sections for 65 of the 180 isotopes present in the library come from ENDF/B-VII.1.Monte Carlo–based neutronics calculations using cross-section libraries from FENDL (versions 2.1 and 3.1d), ENDF/B (versions VII.1 and VIII.0), and candidate new evaluations for key structural elements/isotopes such as iron and chromium were performed. The calculations were performed in reactor-relevant models including a one-dimensional (1-D) cylindrical model of ITER, a three-dimensional (3-D) computer-aided design (CAD)–based model of ITER, and a 3-D CAD-based model of the U.S. Fusion Energy System Studies Fusion Nuclear Science Facility (FNSF).The results show that neutron fluxes calculated with different cross-section libraries can be as much as 12% higher and as much as 8% lower than those calculated with the reference cross-section library (FENDL-2.1). Nuclear heating calculated with different cross-section libraries can be as much as 14% higher and as much as 8% lower than those calculated with the reference cross-section library. Iron displacements per atom calculated with different cross-section libraries can be as much as 9% higher and as much as 9% lower than those calculated with the reference cross-section library. Helium production calculated with different cross-section libraries can be as much as 19% higher and as much as 2% lower than those calculated with the reference cross-section library. Tritium production in the ITER 1-D model's nonbreeding regions calculated with different cross-section libraries can be as much as 246% higher and as much as 5% lower than those calculated with the reference cross-section library. The tritium breeding ratio in the FNSF 3-D model calculated with different cross-section libraries averaged 1% higher at the inboard and 1.4% higher at the outboard than those calculated with the reference cross-section library.

JENDL-5 benchmarking for fission reactor applications

Impact of nuclear data revised from JENDL-4.0 to JENDL-5 on PWR spent fuel nuclide composition

Initial Verification and Validation of a New CASMO5 JENDL-5 Nuclear Data Library for Typical LWR Applications

JENDL-4.0: A New Library for Nuclear Science and Engineering

Criticality Benchmarking of ENDF/B-Ⅷ.0 and JEFF-3.3 Neutron Data Libraries with RMC Code

The joint evaluated fission and fusion nuclear data library, JEFF-3.3

Influence of Nuclear Data Library on Neutronics Benchmark of China Experimental Fast Reactor Start-Up Tests

Testing of V, Si, Ni cross sections for TENDL libraries on fusion relevant benchmarks in support of the development of JEFF-4

Benchmark Test of JEFF-3.2, FENDL-3.0 and TENDL-2015 with TOF Experiments for Graphite, Silicon Carbide, Uranium and Multiple-Slab Samples

Development and Benchmark Validation of Temperature-Dependent Neutron Cross-Section Library for MCNP

JENDL/DEU-2020: deuteron nuclear data library for design studies of accelerator-based neutron sources

Neutronics Calculations to Support the Fusion Evaluated Nuclear Data Library (FENDL)

Verification of CENDL-3.2 and ENDF/B-VIII.0 Evaluated Nuclear Data Library on HTR-10 Benchmark

Fission Fragment Yields Of $^{235}$U$(n_{th},f)$ Evaluated By The CCONE Code System

Performance Of Cendl-3.2 Evaluated Nuclear Data Library For The Shielding Benchmarks

Combining Total Monte Carlo and Benchmarks for nuclear data uncertainty propagation on an LFRs safety parameters

Comparison and sensitivity analysis of the core characteristics of a sodium-cooled fast breeder reactor with 750 MWe output evaluated by JENDL-4.0 and ADJ2000R

Application of CENDL-3.2 and ENDF/B-VIII.0 on the Reactor Physics Simulation of PWR

Experimental decay-heat simulation-benchmark for 14 MeV neutrons & complex inventory analysis with FISPACT-II

Reactor Physics Experiment on a Graphite-Moderated Core to Construct Integral Experiment Database for HTGR

Processing of JEFF-3.3 and ENDF/B-VIII.0 and testing with critical benchmark experiments and TRIGA Mark II research reactor using MCNPX