Abstract:The goal of this research is to optimize the input parameters utilized in dry CNC drilling of forging steel to attain sustainable machining. Particular emphasis will be placed on achieving high productivity while minimizing the impact on surface quality. To achieve the aforementioned goal, three Taguchi-based multi-criteria decision-making (MCDM) approaches, such as traditional gray relational analysis (GRA), weighted gray relational analysis (WGRA), and data envelopment analysis ranking (DEAR), were used for simultaneous optimization of the MRR and Ra. In Taguchi's L12 (24) orthogonal array design, the cutting mode parameters—such as cutting speed, depth of cut, feed rate, and point angle—have been chosen as the input parameters for the modeling and analysis of the drilling process characteristics. The process of determining the effect of the input parameters on the output parameters was carried out with the use of analysis of variance (ANOVA). The best results from the studies were Ra = 2.19 and MRR = 375 mm3/s, which corresponded to Taguchi's single optimization levels, S2F1D1A2 and S2F2D2A1, respectively. In the next step, the performance values obtained for each MCDM technique were reoptimized using the Taguchi method, and the optimal levels were obtained: for traditional GRA, the level S2F1D2A1 (Ra = 2.52 μm, MRR = 125 mm3/s); for WGRA, the level S2F1D1A1 (Ra = 2.31 μm, MRR = 83 mm3/s); and for DEAR, the level S2F2D2A1 (Ra = 4.42 μm, MRR = 375 mm3/s), respectively. Lastly, in order to compare the experiments' performance, validation tests were carried out. The results of the experiments using multi-objective optimization show that traditional GRA improved the overall quality response characteristics by 29.86% compared to the initial setup parameters, while weighted GRA improved them by 34.48%, with the DEAR method providing an improvement of 96%. Based on the findings of this investigation, the DEAR optimization method outperforms the GRA method. As a result, the proposed methods are useful tools for multi-objective optimization of cutting parameters.

Optimization and Machinability Assessment at the Optimal Solutions Across Taguchi OA, GRA, and BBD: An Overall View

Optimization of Multiple Performance Characteristics for CNC Turning of Inconel 718 Using Taguchi–Grey Relational Approach and Analysis of Variance

Multi-objective Optimization of Inconel 718 Using Combined Approach of Taguchi—Grey Relational Analysis

Multi-Objective Optimization of Process Parameters during Micro-Milling of Nickel-Based Alloy Inconel 718 Using Taguchi-Grey Relation Integrated Approach

Multi-response optimization in face milling of EN-31 steel using analytical hierarchy process-based GRA

Hybrid Integration of Taguchi Parametric Design, Grey Relational Analysis, and Principal Component Analysis Optimization for Plastic Gear Production

An Experimental Analysis of Taguchi-Based Gray Relational Analysis, Weighted Gray Relational Analysis, and Data Envelopment Analysis Ranking Method Multi-Criteria Decision-Making Approaches to Multiple-Quality Characteristic Optimization in the CNC Drilling Process

Evaluation of machinability performance of T51603 using response surface methodology and grey relational analysis

Multi-response optimization on the effect of wet and eco-friendly cryogenic turning of D2 steel using Taguchi-based grey relational analysis

Multi-objective optimization for sustainable turning Ti6Al4V alloy using grey relational analysis (GRA) based on analytic hierarchy process (AHP)

Comparative Evaluation of Coated Carbide and CBN Inserts Performance in Dry Hard-Turning of AISI 4140 Steel Using Taguchi-Based Grey Relation Analysis

Multi-objective optimization of machining parameters during green machining of aerospace grade titanium alloy using Grey–Taguchi approach

Optimization of Process Parameters in CNC Turning of Aluminum 7075 Alloy Using L27 Array-Based Taguchi Method

Multi performance optimization in machining of EN31-535A99SS with interchangeable straight cemented tungsten carbide-cobalt mixed (WC–Co) insert grade (CSTC—K20) using Taguchi coupled grey relational analysis

Optimization and measurement of flank wear and surface roughness via Taguchi based grey relational analysis

Optimization of superalloy Inconel 718 micro-milling process by combined Taguchi and multi-criteria decision making method

Multi-objective optimization of high-pressure jet-assisted turning of Inconel 718

Experimental analysis and optimization of machining parameters for Nitinol alloy: A Taguchi and multi-attribute decision-making approach

Multi-Objective Optimization of Micro-Milling Titanium Alloy Ti-3Al-2.5V (Grade 9) Using Taguchi-Grey Relation Integrated Approach

Multi Response Optimization of Setting Input Variables for Getting Better Product Quality in Machining of Magnesium AM60 by Grey Relation Analysis and ANOVA

Optimization of CNC End Milling Process Parameters of Low-Carbon Mold Steel Using Response Surface Methodology and Grey Relational Analysis