Abstract:The physical characteristics of coal reservoirs are important for evaluating the potential for gas desorption, diffusion, and seepage during coalbed methane (CBM) production, and influence the performance of CBM wells. Based on data from mercury injection experiments, low-temperature liquid nitrogen adsorption, isothermal adsorption, initial velocity tests of methane diffusion, and gas natural desorption data from a CBM field, herein the physical characteristics of reservoirs of high-rank coals with different coal-body structures are described, including porosity, adsorption/desorption, diffusion, and seepage. Geometric models are constructed for these reservoirs. The modes of diffusion are discussed and a comprehensive diffusion-seepage model is constructed. The following conclusions were obtained. First, the pore distribution of tectonically deformed coal is different from that of normal coal. Compared to normal coal, all types of pore, including micropores (<10 nm), transitional pores (10–100 nm), mesopores (100–1000 nm), and macropores (>1000 nm), are more abundant in tectonically deformed coal, especially mesopores and macropores. The increase in pore abundance is greater with increasing tectonic deformation of coal; in addition, the pore connectivity is altered. These are the key factors causing differences in other reservoir physical characteristics, such as adsorption/desorption and diffusion in coals with different coal-body structures. Second, normal and cataclastic coals mainly contain micropores. The lack of macropores and its bad connectivity limit gas desorption and diffusion during the early stage of CBM production. However, the good connectivity of micropores is favorable for gas desorption and diffusion in later gas production stage. Thus, because of the slow decline in the rate of gas desorption, long-term gas production can easily be obtained from these reservoirs. Third, under natural conditions the adsorption/desorption properties of granulated and mylonitized coal are good, and the diffusion ability is also enhanced. However, for in situ reservoir conditions, the high dependence of reservoir permeability on stress results in a weak seepage of gas; thus, desorption and diffusion is limited. Fourth, during gas production, the pore range in which transitional diffusion takes place always increases, but that for Fick diffusion decreases. This is a reason for the reduction in diffusion capacity, in which micropores and transitional pores are the primary factors limiting gas diffusion. Finally, the proposed comprehensive model of CBM production under in situ reservoir conditions elucidates the key factors limiting gas production, which is helpful for selection of reservoir stimulation methods.

Differences in accumulation patterns of low-rank coalbed methane in China under the control of the first coalification jump

Main control factors of coalbed methane occurrence differences in adjacent coal seams - a case study of Luling coal mine, Huaibei Coalfield, China

Composition, Origin, and Accumulation Model of Coalbed Methane in the Panxie Coal Mining Area, Anhui Province, China.

Geochemical characteristics, generation, and evolution mechanism of coalbed methane in the south-western Ordos Basin, China

Coalbed methane production of a heterogeneous reservoir in the Ordos Basin, China

A study of the gas–water characteristics and their implications for the coalbed methane accumulation modes in the Southern Junggar Basin, China

The primary controlling factors of the occurrence state of deep high-rank coalbed methane in eastern Ordos Basin

Gas Content and Geological Control of Deep Jurassic Coalbed Methane in Baijiahai Uplift, Junggar Basin

Geological Constraints on the Gas-Bearing Properties in High-Rank Coal: A Case Study of the Upper Permian Longtan Formation from the Songzao Coalfield, Chongqing, Southwest China

Characteristics of Deep Coal Reservoir and Key Control Factors of Coalbed Methane Accumulation in Linxing Area

NMR-Based Investigation of Pore–Fracture Structure Heterogeneity in Deep Coals of Different Macrolithotypes in the Daning-Jixian Block, Ordos Basin

Differences between Shallow and Deep Coal from the Tiefa Basin in Northeastern China

Physical characteristics of high-rank coal reservoirs in different coal-body structures and the mechanism of coalbed methane production

Dual Control of Macrolithotype and Coal Structure on the Pore Parameters of Middle Jurassic Coals in the Southern Junggar Basin, NW China

In-situ geological conditions and their controls on permeability of coalbed methane reservoirs in the eastern Ordos Basin

Genesis and accumulation mechanism of external gas in deep coal seams of the Baijiahai Uplift, Junggar Basin, China

Effects of lignite composition on reservoir structure, water–gas-bearing features and gas enrichment

Pore structure characteristics of low-rank coal reservoirs with different ash yields and their implications for recoverability of coalbed methane—a case study from the Erlian Basin, northeastern China

Evaluation and genetic analysis of coal structures in deep Jiaozuo Coalfield, northern China: Investigation by geophysical logging data

Main controlling factor of coalbed methane enrichment area in southern Qinshui Basin, China

Pore-Fracture Multi-Scale Characterizations of Different Marcolithotypes of Medium-Rank Coals in Jixi Basin, China