Abstract:Smooth surface blasting control technology is aimed at blasting the rock body until it is left with a smooth surface and to protect it from damage; the current air spaced axial uncoupled charge and air spaced radial uncoupled continuous charge are effective charging structures for smooth surface blasting. Reserved air spacing can effectively reduce the blast wave and the peak pressure of the explosive gas, improving the quasi-static pressure of the explosive gas under the action of rock surface blasting with fracture seam quality. In order to ensure the effect of surface blasting, small-diameter light surface holes are more often used; with the development of drilling machinery, the use of large-diameter light blast holes with an oversized uncoupled coefficient of loading structure effectively improves the efficiency of the construction and at the same time achieves better blasting results. However, according to the bursting assumption of obtaining the theory of light surface blasting in the application of large uncoupling coefficient loading, light surface blasting has certain limitations. In this regard, the bursting theory explores the air spacing uncoupling charge in line with the multi-faceted exponential expansion of the critical uncoupling coefficient and is in accordance with the following: the requirements of light surface blasting and the field loading structure; the derivation of the quasi-static pressure on the wall of the gunhole under the action of large uncoupling, uncoupling coefficient, and the parameters of the spacing between the gunholes; the establishment of the axial uncoupling coefficient and the radial uncoupling coefficient-equivalent relationship between the uncoupling coefficient and the theoretical relationship between the selection of the spacing between the holes; the uncoupling coefficient and the selection of the theoretical relationship between the spacing between the holes. This study reveals the mechanism by which different parameters of surface blasting can achieve good results in engineering practices. A slope in Guizhou is an example of sample calculations and the application of two different charging structures applied to field loading, which have achieved good surface blasting results.

Analysis on the impact pressure on blast hole wall with radial air-decked charge based on shock tube theory

Theoretical Calculation and Experimental Analysis on Initial Shock Pressure of Borehole Wall under Axial Decoupled Charge

Radial Pressure Characteristics on Borehole Walls at Decoupled Charge Blasting

Probability Distribution and Determination of Blast Loading During Structural Blast Resistant Study

Analysis on Underwater Blasting Shock Loading and Dynamic Response of Large Scale Radical Gate

Effects of Axial Air Deck on Blast-Induced Ground Vibration

Measurement and Stress Response Analysis of Complete History of Blast-Induced Wall Pressure for Boreholes: A Case with Air-Deck Charge

Centrifuge Experiment and Numerical Analysis of an Air-Backed Plate Subjected to Underwater Shock Loading

Numerical Analysis of Blast Behavior for Non-ideal Explosive ANFO in Shock-Tube Test

Numerical study on the behavior of blasting in deep rock masses

Full‐field Peak Pressure Prediction of Shock Waves from Underwater Explosion of Cylindrical Charges

Influence of water coupling coefficient on the blasting effect of red sandstone specimens

Theoretical Study of Large Uncoupling Coefficient Loading for Surface Blasting

Validation study on numerical simulation of RC response to close-in blast with a fully coupled model

Numerical simulation of the effect of water-decoupling charge blasting on reservoir permeability enhancement

Air-Decking Technique in Bench Blasting

Study on the characteristics of blast loads due to two simultaneous detonated charges in real air

Blasting-induced rock damage control in a soft broken roadway excavation using an air deck at the blasthole bottom

Experimental and numerical study on external explosions of cylindrical versus spherical charges at tunnel entrance

Rock damage control for large-diameter-hole lateral blasting excavation based on charge structure optimization