Abstract:Oil spills on the sea surface have caused serious harm to the marine ecological environment and coastal environment. Oil film thickness (OFT) is an important parameter for estimating oil spills amount, and accurate quantification of OFT is of great significance for rapid response and risk assessment of oil spills. In recent years, thermal infrared remote sensing has been gradually applied to quantify the OFT. In this paper, the outdoor oil spill simulation experiments were designed, and the bright temperature (BT) data of different OFTs were obtained for 24 consecutive hours in summer and autumn. On the basis of the correlation analysis of OFT and bright temperature difference (BTD) between oil and water, the traditional regression fitting model, classical machine learning model, ensemble learning model, and deep learning model were applied to the inversion of OFT. At the same time, inversion results of the four models were compared and analyzed. In addition, the best OFT inversion time using thermal infrared was studied based on 24-h thermal infrared data. Additionally, the inversion results were compared with the measured results; the optimal OFT range detectable using thermal infrared was explored. The experimental results show that: (1) Compared with ensemble learning model, traditional regression fitting model, and classical machine learning model, Convolutional Neural Network (CNN) has the advantages of high stability while maintaining high-precision inversion, and can be used as the preferred model for oil film thickness inversion; (2) The optimal time for OFT detection is around 10:00 to 13:00 of the day, and is not affected by seasonal changes; (3) During the day, thermal infrared has good detection ability for OFT greater than 0.4 mm, and weak detection ability for thinner oil films; (4) At night, thermal infrared has certain detection ability for relatively thick oil film, but the accuracy is lower than that in the daytime.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: how to accurately retrieve the sea - surface oil film thickness (OFT) based on the Bright Temperature Difference (BTD) by using thermal infrared remote sensing technology. Specifically, the research obtains the brightness temperature data of different oil film thicknesses by designing outdoor oil spill simulation experiments, and analyzes the correlation between the oil film thickness and the brightness temperature difference. On this basis, traditional regression fitting models, classical machine - learning models, integrated - learning models and deep - learning models are applied to retrieve the oil film thickness, and the retrieval results of these models are compared to determine the best method for retrieving the oil film thickness. ### Main problem summary: 1. **Accuracy of oil film thickness retrieval**: The research aims to evaluate the performance of different models (traditional regression fitting models, classical machine - learning models, integrated - learning models and deep - learning models) in retrieving the oil film thickness, and determine which model has higher precision and stability. 2. **Optimal detection time**: The research explores the optimal time period for detecting the oil film thickness using thermal infrared remote sensing technology, and studies whether this optimal time period is affected by seasonal changes. 3. **Detection ability of oil films with different thicknesses**: The research analyzes the detection ability of thermal infrared remote sensing technology for oil films with different thicknesses during the day and at night, especially the detection effect for thicker and thinner oil films. ### Research background: Marine oil spill accidents have caused serious harm to the marine ecological environment and the coastal environment. Accurately quantifying the oil film thickness is crucial for rapid response and risk assessment. In recent years, thermal infrared remote sensing technology has been gradually applied to the quantitative retrieval of the oil film thickness. However, existing methods still face challenges in retrieving the oil film thickness, especially how to improve the retrieval accuracy and reliability under complex environmental conditions. ### Research methods: - **Experimental design**: By designing outdoor oil spill simulation experiments, obtain the brightness temperature data of different oil film thicknesses for 24 consecutive hours in summer and autumn. - **Data analysis**: Analyze the correlation between the oil film thickness and the brightness temperature difference, and apply different mathematical and machine - learning models to retrieve the oil film thickness. - **Model evaluation**: Use indicators such as Root Mean Square Error (RMSE), Mean Relative Error (MRE) and Coefficient of Determination (R²) to evaluate the retrieval accuracy of different models. Through these methods, the research aims to provide scientific basis and technical support for the application of thermal infrared remote sensing technology in retrieving the oil film thickness.

Quantitative Inversion Ability Analysis of Oil Film Thickness Using Bright Temperature Difference Based on Thermal Infrared Remote Sensing: A Ground-Based Simulation Experiment of Marine Oil Spill

Quantitative Inversion of Oil Film Thickness Based on Airborne Hyperspectral Data Using the 1DCNN_GRU Model

Research on UV Reflective Spectrum of Floating Transparent Oil

[Experimental Study of Offshore Oil Thickness Hyperspectral Inversion Based on Bio-Optical Model].

Inversion and Evaluation of Oil Thickness Based on a C-Band Microwave Experiment

Quantifying Ocean Surface Oil Thickness Using Thermal Remote Sensing

Detecting and quantifying oil slick thickness by thermal remote sensing: A ground-based experiment

Research on Cross-Spatiotemporal Remote Sensing Detection of Marine Oil Spills and Emulsions Based on Coupling Optical and Thermal Response Characteristics

Thermal Infrared Emissivity Spectrum and Its Characteristics of Crude Oil Slick Covered Seawater

Combined Retrieval of Oil Film Thickness Using Hyperspectral and Thermal Infrared Remote Sensing

Identification of marine oil spill pollution using hyperspectral combined with thermal infrared remote sensing

Hyperspectral Remote Sensing Detection of Marine Oil Spills Using an Adaptive Long-Term Moment Estimation Optimizer

The Remote Sensing Inversion Theory of Offshore Oil Slick Thickness Based on A Two-Beam Interference Model

Detection of Marine Oil Spills Based on HOG Feature and SVM Classifier

Inversion of the refractive index of marine spilled oil using multi-angle sun glitter images acquired by the ASTER sensor

Determining oil slick thickness using hyperspectral remote sensing in the Bohai Sea of China

Characterizing oil spills using deep learning and spectral-spatial-geometrical features of HY-1C/D CZI images

Optical Interpretation of Oil Emulsions in the Ocean – Part I: Laboratory Measurements and Proof-of-concept with AVIRIS Observations

An Optical Remote Sensing Model for Estimating Oil Slick Thickness Based on Two-Beam Interference Theory

Study on the Potential of Oil Spill Monitoring in a Port Environment Using Optical Reflectance

Hyperspectral remote sensing identification of marine oil emulsions based on the fusion of spatial and spectral features