Abstract:Efforts to further enhance the capabilities of silicon as a lithium-ion battery anode are continuing into the realm of chemical composition. Adding varying amounts of other elements can significantly alter the material properties or side reactions, which influence electrochemical performance. Additionally, tuning the chemical composition combined with surface modifications can better enable application of silicon anodes in other devices such as hybrid supercapacitors. Prior work, among others, has shown different performance enhancement regimes depending on how much phosphorus is added to silicon-containing anodes [1, 2]. In particular, the amount of phosphorus from ppm levels to majority atomic fraction can result in enhancement in the conductivity, diffusivity, or forming altogether a wholly new protective matrix [3]. However, while the rate capability has been enhanced only primarily for delithiation, silicon-phosphorus (SiP x ) anodes still suffer from similar capacity degradation issues as pure silicon anodes. In the present work, we attempt to address the capacity degradation issue by using a thin, conformal carbon coating to modify the solid-electrolyte interface (SEI) reaction. Firstly, amorphous nanoparticles of SiP x with a few atomic percent of phosphorus are prepared using silane and phosphine co-pyrolysis. Using an oscillating furnace at 800 degrees Celsius under a low flow of acetylene in Ar carrier gas, we are able to produce consistent, uniform carbon films on nanoparticle agglomerates with select thicknesses between 2 and 10 nm, validated using low voltage scanning transmission electron microscopy (LV-STEM), as shown in Figure 1. By comparing Si- and SiP x -containing anodes in electrochemical half cells, we can reproduce the rate capability results while demonstrating the effect of carbon coating on cycle life and capacity retention. Furthermore, the carbon coating's effect on volume expansion for Si- and SiP x -containing anodes is studied in situ using an electrochemical dilatometer in half cell configuration. [1] Y. Domi, H. Usui, M. Shimizu, Y. Kakimoto, H. Sakaguchi, ACS Applied Materials & Interfaces 2016, 8, 7125-7132. [2] S. Huang, L.-Z. Cheong, D. Wang, C. Shen, ACS Applied Materials & Interfaces 2017, 9, 23672-23678. [3] F. T. Huld, S. Y. Lai, W. M. Tucho, R. Batmaz, I. T. Jensen, S. Lu, O. E. Eleri, A. Y. Koposov, Z. Yu, F. Lou, ChemistrySelect 2022, 7, e202202857. Figure 1

Cycling performance of silicon‐carbon composite anodes enhanced through phosphate surface treatment

Enhanced Silicon Diphosphide-Carbon Composite Anode for Long-Cycle, High-Efficient Sodium Ion Batteries

Simultaneously Manipulating Carbon Coating Layers and Void Structures in Silicon/Carbon Anode Materials Via Bifunctional Templates for Lithium-Ion Batteries

Novel Si@C/P anode materials with improved cyclability and rate capacity for lithium-ion batteries

Cycling performance and failure behavior of lithium-ion battery Silicon-Carbon composite electrode

Critical Thickness of Phenolic Resin-Based Carbon Interfacial Layer for Improving Long Cycling Stability of Silicon Nanoparticle Anodes

Thin, Conformal Carbon-Coating of Silicon-Phosphorus Nanoparticle Agglomerates for Lithium-Ion Battery Anodes

Enabling the Transport Dynamics and Interfacial Stability of Porous Si Anode Via Rigid and Flexible Carbon Encapsulation for High-Energy Lithium Storage

Boosting the anode performance of the porous Si coated with polydopamine and cross-linked with sodium alginate

Synthesis and Surface Engineering of Composite Anodes by Coating Thin-Layer Silicon on Carbon Cloth for Lithium Storage with High Stability and Performance

Microsized Silicon/Carbon Composite Anodes through In Situ Polymerization of Phenolic Resin onto Silicon Microparticles for High-Performance Lithium-Ion Batteries

High Carbon Doping of Amorphous Silicon Nanoparticles in a One-Step Gas-Phase Process for Increased Cycling Stability

Cycle-stable Si-based composite anode for lithium-ion batteries enabled by the synergetic combination of mixed lithium phosphates and void-preserving F-doped carbon

Surface-Bound Silicon Nanoparticles with a Planar-Oriented N-Type Polymer for Cycle-Stable Li-Ion Battery Anode

Study of Porous Si/C Composite Anode for Lithium Ion Batteries

Enhanced Silicon Anodes with Robust SEI Formation Enabled by Functional Conductive Binder

Enhanced Cycleability of Micron‐Size Silicon Anode by In Situ Polymerized Polymer Electrolyte

Improving the Cycling Performance of Lithium-Ion Battery Si/Graphite Anodes Using a Soluble Polyimide Binder

Effect of Phosphorus Doping on Conductivity, Diffusion, and High Rate Capability in Silicon Anode for Lithium-Ion Batteries

The Electrochemical Performance of Silicon Nanoparticles in Concentrated Electrolyte

Phosphorus-doped silicon copper alloy composites as high-performance anode materials for lithium-ion batteries