Application of MgO-Titanomagnetite mixture in high-temperature catalytic pyrolysis of radiata pine

Misel Iminabo,Alex C. K. Yip,John T. Iminabo,Shusheng Pang
DOI: https://doi.org/10.1007/s13399-023-04160-6
IF: 4.05
2023-04-07
Biomass Conversion and Biorefinery
Abstract:This study aimed to investigate the effect of MgO and titanomagnetite mixture on the high-temperature pyrolysis of radiata pine wood in a fluidised bed reactor at 850 °C. The catalytic performance of the MgO-titanomagnetite (MgO-TM) mixture was experimentally evaluated based on product distribution, gas composition, gas properties, and tar composition. The results revealed that addition of MgO-titanomagnetite resulted in a decrease in gas yield (67.2 wt.%) compared to addition of titanomagnetite (TM) alone (72.9 wt.%), but an improvement was found compared to addition of MgO alone (63.9 wt.%). The hydrogen concentration in the gas product was significantly enhanced (23.2 vol.%) compared to titanomagnetite alone (12.8 vol.%) or to non-catalytic (NC) pyrolysis (14.1 vol.%) but was similar to that with addition of MgO alone (22.6 vol.%). However, the addition of MgO and titanomagnetite mixture resulted in a reduction in CO concentration to 2.7 vol.% in the gas product whereas increased the CO 2 and light olefins formation. It was also found that the addition of the MgO and titanomagnetite mixture significantly increased the total concentration of ethylene and propylene (18.3 vol.%) compared to addition of titanomagnetite (5.8 vol.%), MgO (9.0 vol.%), or non-catalytic pyrolysis (12.0 vol.%). The lower heating value of the gas product and the H 2 to CO ratio (17.5 MJ/Nm 3 and 8.7) were also improved with addition of the MgO-titanomagnetite mixture. These findings demonstrate that application of physically mixed MgO and titanomagnetite as catalyst is a promising method for converting biomass into a H 2 -rich gas product via high-temperature pyrolysis. This study offers a useful reference for the development of novel catalytic systems for biomass conversion.
energy & fuels,engineering, chemical
What problem does this paper attempt to address?