Abstract:The scientific objective of the conducted experimental research was to find an answer as to whether the application of magnetic flux leakage would be an effective tool for assessing the technical condition of lift guide rails in which the loss of thickness of the guide part is damage resulting from the brake whose operation destructively affects the surface shown. In particular, the scientific objective was to investigate the potential of this method in the context of quantitative assessment of the degree of damage featuring small increments in depth at the level of tenths of a millimetre. The conducted research was also aimed at determining the correlation of the effect of damage type with the nature of the signal recorded. The article presents the results of our own research, obtained from experiments on the use of magnetic flux leakage (MFL) to diagnose damage occurring on lift guide rails. During operation, lift guide rails are exposed to contact with the friction elements of brakes, resulting in the violation of their surfaces. Damage to the working surfaces of guide rails increases the vibration of the device, noise and wear of other components of the lift, such as guide rails. Currently, diagnostics of lift guide rails are not carried out, and their replacement depends on their technical condition. However, from an economic point of view, there are situations wherein their condition allows their use without their replacement with new ones. This was the main factor that guided the authors; we used a diagnostic head of our own design for the tests. The obtained measurement results showed that magnetic flux leakage can be used with great success to diagnose damage to guide rails. The results obtained in the laboratory shall be further developed in the form of research on correlating the signals obtained from magnetic sensors and the size of the damage, which shall eventually allow for a final quantitative assessment of guide rails regarding their technical condition. The conducted research fits into the scope of sustainable development by reducing the need for the consumption of electric energy and the emission of harmful substances into the atmosphere in the overall production balance. This will be made possible by implementing the developed head in industrial practice in the context of assessing the need to replace guide rails with new ones. The economic and environmental efficiency that is the basis of sustainable development in the context of lifts can be achieved at the modernisation stage by repeated (further) use of as many components as possible. An example of this is the guide rail system, the reuse of which is possible after a prior assessment of its wear and tear.

Method of Failure Diagnostics to Linear Rolling Guides in Handling Machines

Research of Singular Value Decomposition Based on Slip Matrix for Rolling Bearing Fault Diagnosis

Rolling element bearings fault diagnosis based on physical model identification

Use of Magnetic Flux Leakage to Diagnose Damage to a Lift Guide Rails System with Reference to the Sustainability Aspect

Early Weak Fault Diagnosis of Rolling Bearings Based on Fiber Bragg Grating Sensing Monitoring

Analysis of Vibration Characteristics of Rolling Linear Guides

Early fault diagnosis in rolling element bearings: comparative analysis of a knowledge-based and a data-driven approach

A Low Complexity Rolling Bearing Diagnosis Technique Based on Machine Learning and Smart Preprocessing

Rolling Bearing Fault Diagnosis Based on Successive Variational Mode Decomposition and the EP Index

Investigation of a wheel-rail roller rig for wheel-track defect detection

Evaluation of the Diagnostic Sensitivity of Digital Vibration Sensors Based on Capacitive MEMS Accelerometers

Dynamic Characteristics of Linear Rolling Guide Joint Based on Contact Stiffness

Research on surface defect detection system and method of train bearing cylindrical roller based on surface scanning

A novel method for diagnosing rolling bearing surface damage by electric impedance analysis

VIBRATION ANALYSIS FOR INCIPIENT BEARING FAULT DETECCTION USING A NON-MANUAL INDEX

Application of Machine learning for the identification of the rolling bearings state in agricultural mechanization based on vibration

Study and Application on the Early Damage Signal Characteristics of Ultra-Low-Speed and Heavy-Load Rolling Bearings of Large Amusement Machinery

Nonlinear modeling for bearing fault diagnosis in non-stationary operating conditions

Structural Health Monitoring of Rotating Machines in Manufacturing Processes by Vibration Methods

A Survey on Fault Diagnosis Approaches for Rolling Bearings of Railway Vehicles

Design and Experimental Research of a Non-Destructive Detection Device for High-Precision Cylindrical Roller Dynamic Unbalance