Abstract:The rapid cleanup of endogenous CO2 has become a necessity in environmental control and life support systems (ECLSSs), to ensure crew safety and long-term task execution. The extensively used non-regenerable LiOH and soda lime adsorbents, although exhibit high CO2 storage capacities and fast kinetics, can hardly fulfill the demands of reduced launch weight and storage volume in the space-and load-limited ECLSSs. New CO2 adsorbents with desirable attributes including high CO2 uptakes, good selectivity, facile regeneration, fast adsorption and desorption kinetics, and good multicycle stability are urgently needed. We developed amine-functionalized adsorbents by loading tetraethylenepentamine (TEPA) on mesoporous supports of activated carbon (AC), aluminum oxide (AO) and silica gel (SG). The adsorbents were characterized by N-2 adsorption-desorption, thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR), and scanning electron microscope (SEM) to study their microstructural properties. CO2 adsorption capacities and kinetic performance of the adsorbents with different supports and various amine loadings (10-50 wt%) were evaluated in 2%CO2 at 20 degrees C. The effects of support and amine loading on the structure-performance relationships of the adsorbents were demonstrated. The TEPA-SG-20 adsorbent (20 wt% TEPA loaded on silica gel support) exhibits the highest CO2 adsorption capacity of 1.90 mmol CO2/g and the maximum amine efficiency of 0.48 mmol CO2/mmol N. TEPA-SG-20 also exhibits fast CO2 adsorption kinetics, and the Avrami fractional order kinetic model provides a satisfactory correlation of the experimental CO2 uptakes. Furthermore, the TEPA-SG-20 adsorbent can be efficiently regenerated at 110 degrees C with a great regeneration efficacy of 97%. The desired adsorbent also exhibits good working stability with a low loss-in-capacity of 4.32% in 10 consecutive cycles. The good CO2 adsorption performance of TEPA-SG-20 is associated with the excellent microstructural properties such as high surface area, great pore volume and uniform dispersion of amine species. Overall, the desired TEPA-SG-20 adsorbent shows promise for low concentration CO2 removal in ECLSSs. (c) 2022 Institution of Chemical Engineers. Published by Elsevier Ltd. All rights reserved.

Surface Modification of Activated Carbon Fibers for the Adsorption Capture of Carbon Dioxide in Flue Gas

Enhanced Tolerance to Flue Gas Contaminants on Carbon Dioxide Capture Using Amine-Functionalized Multiwalled Carbon Nanotubes

Adsorption of low-concentration carbon dioxide on amine-modified carbon nanotubes at ambient temperature

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

Adsorption separation of CO_2 from flue gas by hyperbranched solid-amine

Amine‐modified acid‐activated attapulgite as efficient and stable adsorbents for CO2 capture from flue gas

Dynamic performance of CO2 adsorption with tetraethylenepentamine-loaded KIT-6

Amine-Modified Biochar for the Efficient Adsorption of Carbon Dioxide in Flue Gas

Enhanced carbon dioxide adsorption by amine-modified KCC-1

The effect of humidity on the enhanced CO2 adsorption of amine-functionalized microporous activated carbon

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Utilization of carbon dioxide onto activated carbon fibers for surface modification

Experimental and Kinetics Investigations of Low-Concentration CO2 Adsorption on Several Amine-Functionalized Adsorbents

Effect of process parameters influencing the chemical modification of activated carbon fiber for carbon dioxide removal

Tailoring tea residue-derived nitrogen-doped activated carbon for CO2 adsorption: influence of activation temperature and activating agents

Enhancement of CO2 Adsorption on High Surface Area Activated Carbon Modified by N2, H2 and Ammonia

Direct Air Capture of CO2 with Metal Nitrate-Doped, Tetraethylenepentamine-Functionalized SBA-15 Adsorbents

Kinetic Study on CO2 Adsorption Behaviors of Amine-Modified Co-Firing Fly Ash

Activated Carbon Fiber Felt Composites for the Direct Air Capture of Carbon Dioxide

Surface-modified spherical activated carbon materials for pre-combustion carbon dioxide capture

Surface Functionalization of Activated Carbon with Phosphonium Ionic Liquid for CO2 Adsorption