Abstract:Thermal treatment is gaining increasing attention for bamboo modification in practical production due to its advantages of simplicity, effectiveness and environmental friendliness, particularly in the production of bamboo scrimber. The objective of this study is to investigate the effects of two typical thermal modification methods on the physical, mechanical and fire performance of bamboo scrimber, as well as the related physicochemical properties of bamboo bundles for production purpose. The results indicated that the two types of bamboo scrimber processed distinct advantages in terms of physical and mechanical performances. Specifically, the one processed with bamboo bundles treated by superheated steam at a temperature of 200 ℃ (referred to as the “HL group”), exhibited exceptional dimensional stability and fire resistance, while exhibiting slightly lower mechanical properties. Notably, the HL group exhibited a significantly more pronounced hue compared to the LS group, which was treated with saturated vapor at a temperature of 140 ℃. Both demonstrated exceptional water resistance, with the HL group surpassing that of the LS group in either 24-hour room temperature or a combination of boiling-drying cycling treatments. The MORs of the LS group were determined to be 152.3 MPa and 108.5 MPa under dry and wet conditions, respectively, exhibiting significantly higher values than those observed in the HL group. Conversely, the variation of MOEs was found to be opposite. Both MORs and MOEs of the two groups exhibited a significant decrease in wet condition compared to those in dry condition, with reductions linearly correlated to water absorption of the samples. The failure mode of the LS group demonstrated elastoplastic failure characterized by a “Z-shaped”, while the HL group exhibited with a relatively flat cross-section. Furthermore, the HL group demonstrated superior fire performance in comparison to the LS group, and as evidenced by a significantly denser char residue surface with fewer and wider cracks than that of the LS group. The variations of chemical components and microstructures in bamboo can be attributed to variances in the extent of degradation of hemicellulose, lignin, and even cellulose during the thermal modification processes. The water resistance, dimensional stability and fire performance of bamboo scrimber can be significantly improved through thermal treatment, while resulting in a decrease in MOR, particularly for the HL group. The HL and LS groups of bamboo scrimber both exhibited excellent performances, making them suitable for application as structural engineering materials. The work we conducted offers experimental and theoretical support for improve the pre-treatment procedures of bamboo in the manufacturing of bamboo scrimber for structural utilizations.

Chromatic aberration and decay resistance performance of bamboo and bamboo scrimber decayed by white-rot and brown-rot fungi

Influence of Potassium Permanganate Pretreatment on Mechanical Properties and Thermal Behavior of Moso Bamboo Particles Reinforced Pvc Composites

Decay Level Classification of Wooden Components in Tingbao Yang’s Former Residence Utilizing Polarization and Fluorescence Effects

Responses of Soil Carbon and Microbial Residues to Degradation in Moso Bamboo Forest

Temporal Dynamics of Fungal Communities in Alkali-Treated Round Bamboo Deterioration under Natural Weathering

STUDY ON THE DECAY EXTENT OF WOODEN COMPONENTS OF DANXIA TEMPLE ANCIENT BUILDING BY POLARIZED LIGHT, FLUORESCENCE AND X-RAY DIFFRACTION METHODS

Comparative studies on the durability and moisture performance of wood modified with cyclic N-methylol and N-methyl compounds

Study on the Identification and the Extent of Decay of the Wooden Components in the Xichuan Guild Hall Ancient Architectures

Compressive strength degradation of engineered bamboo subjected to fungal attack

The physical, mechanical and fire performance of bamboo scrimber processed with thermal-treated bamboo bundles

Effects of bamboo species, steam-heating treatment, and adhesives on mechanical properties and dimensional stability of oriented bamboo scrimber boards

Effects of Accelerated Ageing by Humidity and Heat Cycles on the Quality of Bamboo

Multi-Scale Evaluation of the Effect of Thermal Modification on Chemical Components, Dimensional Stability, and Anti-Mildew Properties of Moso Bamboo

The effect of chemical treatment on green color preservation and surface characteristics of Neosinocalamus affinis bamboo

Research on the Change in Chemical Composition and Fungal Resistance of Moso Bamboo with Heat Treatment

A Simple and Effective Method to Enhance the Mechanical Properties, Dimensional Stability, and Mildew Resistance of Bamboo Scrimber

Wood modification with N-methylol and N-methyl compounds: a case study on how non-fixated chemicals in modified wood may affect the classification of their durability

Degradation-driven vegetation-soil-microbe interactions alter microbial carbon use efficiency in Moso bamboo forests

Study on the Properties of Transparent Bamboo Prepared by Epoxy Resin Impregnation

Durability Evaluation of Outdoor Scrimbers Fabricated from Superheated Steam-Treated Bamboo Fibrous Mats

........Pelit, Alkan, Yalcin: Decay Resistance and Color Change of Pine and Beech Wood..