Abstract:This article is devoted to a comparison of two advanced control techniques applied to the same plant. The plant is a certain type of axial-piston pump. A linear-quadratic (LQR) controller and an H-infinity (H∞) controller were synthesized to regulate the displacement volume of the pump. The classical solution to such a problem is to use a hydro-mechanical controller (by pressure, flow rate, or power) but, in the available sources, there are solutions that implement proportional-integral-derivative (PID), LQR, model predictive control (MPC), etc. Unlike a classical solution, in our case, the hydro-mechanical controller is replaced by an electro-hydraulic proportional valve, which receives a reference signal from an industrial microcontroller. It is used as the actuator of the pump swash plate. The pump swash plate swivel angle determines the displacement volume, respectively, and the flow rate of the pump. The microcontroller is capable of embedding various control algorithms with different structures and complexities. The developed LQR and H∞ controllers are compared in the simulation and real experiment conditions. For this purpose, the authors have developed a laboratory experimental test bench, enabling a real-time function of the control system via USB/CAN communication. Both controllers are compared under different pump loading modes. Also, this paper contributes an uncertain model of an axial-piston pump with proportional valve control that is obtained from experimental data. Based on this model, the robust stability of the closed-loop system is investigated by comparing the structure of a singular value (μ). The investigations show that both control systems achieved robust stability. Moreover, they can tolerate up to four times larger uncertainties than modeled ones. The system with the H∞ controller attenuates approximately at least 30 times the disturbances with frequency up to 1 rad/s while the system with the LQR controller attenuates at least 10 times the same disturbances.

A Comparative Research of Control System Design Based on H-Infinity and ALQR for the Liquid Rocket Engine of Variable Thrust

Performance Comparison of Control Strategies for a Variable-Thrust Solid-Propellant Rocket Motor

Stable Adaptive Control Strategy in Thrust System of Shield Machine

An Integrated Controller Design for a Small Aero-Engine

Thrust Control Method and Technology of Variable-Thrust Liquid Engine for Reusable Launch Rocket

The Nonlinear Single Controller Of Dgen380 Aero Engine Design

Design of Thrust Vectoring Vertical/Short Takeoff and Landing Aircraft Stability Augmentation Controller Based on L1 Adaptive Control Law

Adaptive Pressure Control for Use in Variable-Thrust Rocket Development

Engine Control Design Using Globally Linearizing Control and Sliding Mode

Designing Backstepping Control System for Hypersonic Vehicle Based on Feedback Linearization

Off-Equilibrium Linearization-Based Control of Nonlinear Time-Delay System and Application to a Turbofan Engine

Comparison of Advanced Multivariable Control Techniques for Axial-Piston Pump

Design of 2-DOF Thrust vector control system for Rockets and Missiles

Throttling simulation and control of liquid oxygen/liquid methane rocket engine pressurized by the electric pump

L 1 Adaptive Control of a Generic Hypersonic Vehicle Model with a Blended Pneumatic and Thrust Vectoring Control Strategy

Fuzzy-Set Theoretic Control Design for Aircraft Engine Hardware-in-the-Loop Testing: Mismatched Uncertainty and Optimality

Recent research progress on airbreathing aero-engine control algorithm

A composite controller design using an adaptive internal type-2 fuzzy logic system and the fixed-time disturbance observer for an air-breathing hypersonic vehicle with a variable geometry inlet

Design and Verification of Attitude Control System for a Boost-Glide Rocket

Thrust Control of Lab-Scale Hybrid Rocket Motor with Wax-Aluminum Fuel and Air as Oxidizer

Research on Hydrogen-Fueled Turbojet Engine Control Method Based on Model-Based Design