Abstract:Developing alternatives to replace fossil fuels is an important issue for maintaining sustainable energy system in the future. Hydrogen fuel is an attractive alternative owing to its high energy density and environmentally friendly by-products. Electrical water splitting powered by a renewable energy source is a promising way to produce hydrogen fuel. However, anodic water oxidation is considered to be a bottleneck due to its high overpotential. Therefore, designing efficient catalyst for water splitting is regarded as an important issue. Previously, Ir and Ru-based catalysts have been shown to exhibit remarkable catalytic activity toward oxygen evolving reaction (OER) under acidic condition. Despite their high activity, it is difficult to use noble-metal-based catalysts for commercial applications because of the scarcity of precious metals and their costs. Therefore, non-precious transition metal oxide electrocatalysts were investigated for water oxidation reaction such as cobalt oxides, nickel oxides, iron oxides and manganese oxides.1,2 Their activities were only retained under basic conditions and advancement in electrocatalysts that show moderate activity at neutral pH has been relatively insufficient. Nature has highly efficient OER catalysts in photosystem II which is Mn4CaO5 cluster also called as oxygen evolving complex. Inspired by unique structure and catalytic mechanism of this cluster, Mn-based catalysts have been actively studied. Among various manganese oxide, nanoparticle system showed superior catalytic activity due to its totally different reaction mechanism compared to the bulk counterparts.3,4 However, after synthesis of manganese oxide nanoparticles, long alkyl organic ligands are attached on the surface of nanoparticles interrupting the approach of water molecules, which inhibits water oxidation. Previously, hydrophobic organic ligands were removed by thermal decomposition with sufficient annealing process. Alternative way to remove alkyl ligands is replacing it with different ligands through surface ligand treatment such as BF4 -, PF6 -, OH-, thiol, SCN- and PbCl3 -. Surface ligand exchange is beneficial in that it does not need high temperature annealing and possibility of fine surface control. We have successfully synthesized 6 nm Mn3O4 nanoparticles (NPs) and used for further surface treatments. Mn3O4 NPs were OH ligand exchanged as a first step and followed by methylamine treatment in aqueous solution. Identical TEM images and XRD patterns showed that the size of NPs was unchanged and the phase of NPs was maintained as Mn3O4. Electrokinetic study of the OER was analyzed by cyclic voltammetry (CV) at pH 7 and compared between OH ligand exchanged Mn3O4 NPs and further methylamine treated Mn3O4 NPs. Methylamine treatment reduced the overpotential for OER by nearly 100 mV at the current density 5 mA cm-2. Tafel slopes was also decreased after methylamine treatment to 83.1 mV dec-1. To understand the phenomenon of increased catalytic activity after methylamine treatment, further analysis of the surface of NPs were conducted using spectroscopic measurement. In the XPS O 1s spectra, surface hydroxyl group (Mn-OH) was increased up to 57.3 % after OH ligand exchange. Also, FTIR spectra showed increased ratio of Mn-OH to lattice oxygen (Mn-O-Mn) for OH ligand exchanged Mn3O4 NPs compared to Mn3O4 NPs which indicates successful OH ligand exchange on the surface of Mn3O4 NPs. After methylamine treatment of OH ligand exchanged Mn3O4 NPs, methylamine was not attached to the surface of NPs. XPS N 1s spectra did not show characteristic methylamine peak, FTIR did not show C-N vibration mode and elemental analysis indicates that N does not exist in the NPs. To figure out the role of methylamine on the surface of OH ligand exchanged Mn3O4 NPs, titration and zeta potential was measured. After methylamine treatment surface was more deprotonated. Deprotonation resulted in loss of positively charged proton which induced negative charge on the surface of Mn3O4 NPs and showed negative zeta potential. On the basis of nonexistence of methylamine on the surface and surface deprotonation after methylamine treatment, we hypothesized that methylamine work as Brønsted-Lowry base. Methylamine was replaced by ethylamine, ethylenediamine, dimethylamine, trimethylamine and ammonia water, then after reaction with different amines, overpotential was decreased for all cases. Interestingly, amines with larger pK a showed larger decrease in overpotential. Based on these results, we first proposed correlation between the surface charge and oxygen evolving activity. Deprotonating the surface of the catalyst through simple acid-base reaction induced a change in the surface state followed by catalytic activity improvement. This understanding can be applied for developing efficient nano-catalysts by deprotonating the nanoparticle surface to induce surface state change. [1] J. Am. Chem. Soc., 2014, 136, 4201-4211 [2] J. Am. Chem. Soc., 2014, 136, 7435-7443 [3] Sci. Rep., 2015, 5, 10279 [4] J. Am. Chem. Soc., 2017, 139, 2277-2285 Figure 1

Synthesis of MnS/MnO Decorated N, S‐Doped Carbon Derived from a Mn(II)‐Coordinated Polymer for the Catalytic Oxidation of H2O2 and Bisphenol A

Stable Incorporation of MnOx Quantum Dots into N-doped Hollow Carbon: A Synergistic Peroxymonosulfate Activator for Enhanced Removal of Bisphenol A

Oxygen-defective MnO2−x Rattle-Type Microspheres Mediated Singlet Oxygen Oxidation of Organics by Peroxymonosulfate Activation

MnOx@N-doped carbon nanosheets derived from Mn-MOFs and g-C3N4 for peroxymonosulfate activation: Electron-rich Mn center induced by N doping

Ultrafine-Mn2O3@N-doped Porous Carbon Hybrids Derived from Mn-MOFs: Dual-reaction Centre Catalyst with Singlet Oxygen-Dominant Oxidation Process

Controlled Synthesis, Characterization, And Catalytic Properties Of Mn2o3 And Mn3o4 Nanoparticles Supported On Mesoporous Silica Sba-15

Synergistic activation of peroxymonosulfate by MnO/Fe3C encapsulated in N-doped carbon nanosheets for the enhanced degradation of bisphenol A

SiO<sub>2</sub> mediated templating synthesis of -Fe<sub>2</sub>O<sub>3</sub>/MnO<sub>2</sub> as peroxymonosulfate activator for enhanced phenol degradation dominated by singlet oxygen

Electronic Structure Modulation and Peroxymonosulfate Activation Mechanism of N-doped MnCo2O4: A Study on the Efficient Catalytic Degradation of Sulfamethoxazole

Morphology‐Tuned Exceptional Catalytic Activity of Porous‐Polymer‐Supported Mn3O4 in Aerobic Sp3 CH Bond Oxidation of Aromatic Hydrocarbons and Alcohols

Facile Template Synthesis of Dumbbell-Like Mn2O3 with Oxygen Vacancies for Efficient Degradation of Organic Pollutants by Activating Peroxymonosulfate

Bonding MnO2/Fe3O4 shell-core nanostructures to catalyze H2O2 degrading organic dyes.

Methylamine Treated Mn3O4 Nanoparticles As a Highly Efficient Water Oxidation Catalyst under Neutral Condition

Synthesis, Characterization, and Catalytic Application of Colloidal and Supported Mn Nanoparticles

Mechanochemically synthesized Mn 3 O 4 @β-cyclodextrin mediates efficient electron transfer process for peroxymonosulfate activation

Functionally Guided Precise Synthesis of Manganous Oxide‐Polyoxometalate 2D Hybrid Sub‐1 Nm Nanosheet Superstructures

Catalytic Carbon Monoxide Oxidation over Potassium-Doped Manganese Dioxide Nanoparticles Synthesized by Spray Drying

Mesoporous manganese dioxide prepared by nano-casting: An efficient catalyst for of methyl orange and oxalic acid degradation in aqueous solution

Oxygen Vacancies and Interfacial Engineering of MnO/Mn 3 O 4 Heterojunction for Peroxymonosulfate Activation to Promote Bisphenol A Removal

Doped Mn modulates the local charge distribution of cobalt-based spinel catalysts to promote the availability of ligand lattice oxygen for complete oxidation of methane

Mechanochemical redox-based synthesis of highly porous Co Mn1-O catalysts for total oxidation