Laser-Cutted Epidermal Microfluidic Patch with Capillary Bursting Valves for Chronological Capture, Storage, and Colorimetric Sensing of Sweat

Yuxin He,Lei Wei,Wenjie Xu,Huaping Wu,Aiping Liu

DOI: https://doi.org/10.3390/bios13030372

2023-03-13

Biosensors

Abstract:Flexible wearable microfluidic devices show great feasibility and potential development in the collection and analysis of sweat due to their convenience and non-invasive characteristics in health-level feedback and disease prediction. However, the traditional production process of microfluidic patches relies on resource-intensive laboratory and high-cost facilities. In this paper, a low-cost laser-cutting technology is proposed to fabricate epidermal microfluidic patches for the collection, storage and colorimetric analysis of sweat. Two different types of capillary bursting valves are designed and integrated into microchannel layers to produce two-stage bursting pressure for the reliable routing of sweat into microreservoirs in sequential fashion, avoiding the mixing of old and new sweat. Additionally, an enzyme-based reagent is embedded into the microreservoirs to quantify the glucose level in sweat by using colorimetric methods, demonstrating a high detection sensitivity at the glucose concentration from 0.1 mM to 1 mM in sweat and an excellent anti-interference performance that prevents interference from substances probably existent in sweat. In vitro and on-body experiments demonstrate the validity of the low-cost, laser-cut epidermal microfluidic patch for the chronological analysis of sweat glucose concentration and its potential application in the monitoring of human physiological information.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to provide a low - cost and simple method for manufacturing microfluidic patches for the sequential collection, storage, and colorimetric analysis of sweat. Specifically, the article aims to fabricate epidermal microfluidic patches through laser - cutting technology and design two types of capillary burst valves (CBVs) to achieve phased - pressure control of sweat, thereby avoiding the mixing of old and new sweat and ensuring the accuracy of detection. In addition, this study also integrates enzyme - based reagents for the quantitative analysis of glucose concentration in sweat, demonstrating its potential application in monitoring human physiological information.

### Key Problem Summary:
1. **High cost of traditional microfluidic patch manufacturing**: Traditional microfluidic patches rely on resource - intensive laboratories and high - cost equipment, which limits their wide application.
2. **Mixing of old and new sweat during sweat collection**: This will affect the measurement accuracy of biomarkers because these markers change over time.
3. **Lack of efficient, sensitive, and interference - resistant glucose detection methods**: Existing sweat glucose detection methods may be interfered by other sweat components, affecting the detection results.

### Solutions:
- **Low - cost laser - cutting technology**: Use a simple laser - cutting method to fabricate microfluidic patches without the need for expensive experimental conditions and complex processes.
- **Design of capillary burst valves (CBVs)**: By designing two different types of CBVs (CBV#1 and CBV#2), achieve phased - pressure control of sweat, ensure that sweat enters the micro - reservoirs in sequence, and avoid mixing.
- **Integration of glucose colorimetric sensors**: Use enzyme - based reagents embedded in the micro - reservoirs to quantitatively detect the glucose concentration in sweat through color change, showing high sensitivity and good anti - interference performance.

### Formula Explanation:
The formulas involved in the article mainly describe the flow behavior of liquids in micro - channels. For example, the Young equation is used to calculate the additional pressure when the liquid is at rest:

\[
\Delta P_e = P_A - P_O = - 2\sigma \left( \frac{\cos\theta_A}{w}+\frac{\cos\theta_V}{h} \right)
\]

where:
- \( P_A \) is the pressure of the internal curved liquid surface.
- \( P_O \) is the pressure of the external curved liquid surface.
- \( \sigma \) is the surface tension coefficient.
- \( \theta_A \) and \( \theta_V \) are the contact angles of the liquid with the side wall and the top/bottom wall respectively.
- \( w \) and \( h \) are the width and height of the micro - channel respectively.

Another important formula describes the inlet burst pressure when the liquid enters CBV#1:

\[
\Delta P_{rec} = P_A - P_O = - 2\sigma \left( \frac{\cos\theta_I}{w}+\frac{\cos\theta_V}{h} \right),\quad \theta_I=\min(\theta_A + \beta,180^{\circ})
\]

These formulas help to explain the physical mechanism of liquid flow in microfluidic patches and ensure the effectiveness of the design.