Tribological Performance of a Composite Cold Spray for Coated Bores

Tomanik,Aubanel,Bussas,Delloro,Lampke

DOI: https://doi.org/10.3390/lubricants11030127

2023-03-11

Lubricants

Abstract:The tribological performance of a thermal sprayed, mirror-like surface with localized protuberances was investigated through tribotests and computational simulation. A composite coating with a 410L steel matrix and M2 tool steel hard particles was applied by the cold spray process as a bore coating for combustion engines. The presence of protuberances promoted the quick formation of an antifriction tribofilm when tested with an SAE 0W-16 containing ZDDP and MoDTC, which significantly reduced the asperity friction in comparison to the conventional engine coated bores in reciprocating tribological tests. An in-house computational model using deterministic numerical methods was used for the mixed and hydrodynamic lubrication regime. Lubricant film thickness and friction were simulated for a piston ring versus the proposed coating. The computer simulations showed that the protuberances reduced the hydrodynamic friction by increasing the otherwise very thin oil film thickness of mirror-like surfaces. Although not intuitive, this result was caused by the reducing of the oil film shear rate.