Abstract:The Haber–Bosch (HB) process is the primary chemical synthesis technique for industrial production of ammonia (NH3) for manufacturing nitrate-based fertilizer and as a potential hydrogen carrier. The HB process alone is responsible for over 2% of all global energy usage to produce more than 160 million tons of NH3 annually. Iron catalysts are utilized to accelerate the reaction, but high temperatures and pressures of atmospheric nitrogen gas (N2) and hydrogen gas (H2) are required. A great deal of research has aimed at increased performance over the last century, but the rate of progress has been slow. This Account focuses on determining the atomic-level reaction mechanism for HB synthesis of NH3 on the Fe catalysts used in industry and how to use this knowledge to suggest greatly improved catalysts via a novel paradigm of catalyst rational design.We determined the full reaction mechanism on the two most active surfaces for the HB process, Fe(111) and Fe(211)R. We used density functional theory (DFT) to predict the free-energy barriers for all 12 important reactions and the 34 most important 2 × 2 surface configurations. Then we incorporated the mechanism into kinetic Monte Carlo (kMC) simulations run for several hours of real time to predict turnover frequencies (TOFs). The predicted TOFs are within experimental error, indicating that the predicted barriers are within 0.04 eV of experiment.With this level of accuracy, we are poised to use DFT to improve the catalyst. Rather than forming bulk alloys with uniform concentration, we aimed at finding additives that strongly prefer near-surface sites so that minor amounts of the additive might lead to dramatic improvements. However, even for a single additive, the combinations of surface species and reactions multiplies significantly, with ∼48 reaction steps to examine and nearly 100 surface configurations per 2 × 2 site. To make it practical to examine tens of dopant candidates, we developed the hierarchical high-throughput catalysis screening (HHTCS) approach, which we applied to both the Fe(111) and Fe(211) surfaces. For HHTCS, we identified the most important 4 reaction steps out of 12 for the two surfaces to examine >50 dopant cases, where we required performance at each step no worse than for pure Fe. With HHTCS, the computational cost is about 1% of that for doing the full reaction mechanism, allowing us to do ≈50 cases in about 1/2 the time it took to do pure Fe(111). The new leads identified with HHTCS are then validated with full mechanistic studies.For Fe(111), we predict three high-performance dopants that strongly prefer the second layer: Co with a rate 8 times higher, Ni with a rate 16 times higher, and Si with a rate 43 times higher, at 400 °C and 20 atm. We also found four dopants that strongly prefer the top layer and improve performance: Pt or Rh 3 times faster and Pd or Cu 2 times faster. For Fe(211), the best dopant was found to be second-layer Co with a rate 3 times faster than that for the undoped surface.The DFT/kMC data were used to predict reshaping of the catalyst particles under reaction conditions and how to tune dopant content so as to maximize catalytic area and thus activity. Finally, we show how to validate our mechanistic modeling via a comparison between theoretical and experimental operando spectroscopic signatures.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.accounts.1c00789.Schematic depiction of the bcc surface structures here investigated also showing 4-fold binding sites (PDF)This article has not yet been cited by other publications.

Using first principles to predict bimetallic catalysts for the ammonia decomposition reaction

Probing the effect of the Pt-Ni-Pt(111) bimetallic surface electronic structures on the ammonia decomposition reaction.

Ammonia as hydrogen carrier: Advances in ammonia decomposition catalysts for promising hydrogen production

Modulating Electronic Metal‐Support Interactions to Boost Visible‐Light‐Driven Hydrolysis of Ammonia Borane: Nickel‐Platinum Nanoparticles Supported on Phosphorus‐Doped Titania

Hydrogen evolution reaction of ammonium borane at bimetal atoms supported by porous g-C 3 N 4 surface: Mechanistic insights from theoretical studies

Theoretical study of transition metal atom pairs anchored in g-CN monolayers for ammonia decomposition

An electrochemical approach for designing thermochemical bimetallic nitrate hydrogenation catalysts

Metal dimers anchored on boron nitride monolayers with boron divacancy as an effective nitrogen fixation electrocatalyst: A computational study

Syntheses of Pt‐Ni Hollow Nanoalloy for Hydrogen Generation from Catalytic Hydrolysis of Ammonia Borane

Reaction Mechanisms, Kinetics, and Improved Catalysts for Ammonia Synthesis from Hierarchical High Throughput Catalyst Design

Dual Active Sites for Ammonia Synthesis at Ambient Pressure

Highly loaded bimetallic iron-cobalt catalysts for hydrogen release from ammonia

Highly efficient decomposition of ammonia using high-entropy alloy catalysts

In-situ electrochemical reconstruction and modulation of adsorbed hydrogen coverage in cobalt/ruthenium-based catalyst boost electroreduction of nitrate to ammonia

H2 Production via Ammonia Decomposition Using Non-Noble Metal Catalysts: A Review

Unveiling high-efficient electrochemical ammonia oxidation: A first-principles exploration of Pt-based alloy catalysts

Nanostructured Ni2P As a Robust Catalyst for the Hydrolytic Dehydrogenation of Ammonia–Borane

Insight into the Dynamic Evolution of Co3Mo3N Bimetallic Nitride Surface During Ammonia Synthesis

Strong metal‒support interaction modulates catalytic activity of Ru nanoparticles on Gd2O3 for efficient ammonia decomposition

Robust Active Site Design of Single Atom Catalysts for Electrochemical Ammonia Synthesis

Transition metal decorated bismuthene for ammonia synthesis: A density functional theory study