Abstract:Ammonium (NH4+) in wastewater is both a major pollutant and a valuable resource. Flow-electrode capacitive deionization (FCDI) is a promising technology for chemical-free and environmentally friendly NH4+ removal and recovery from wastewater. However, the coexisting sodium (Na+) in wastewater, with a similar hydrated radius to NH4+, competes for the adsorption sites, resulting in low NH4+ removal efficiency. Here, potassium dititanate (K2Ti2O5 or KTO) particles prepared by the electrospray method followed by calcination were mixed with activated carbon (AC) powder to form a novel KTO-AC flow-electrode for selective NH4+ removal over Na+. The mixed KTO-AC electrode exhibits a much higher specific gravimetric capacitance in NH4Cl solution than in NaCl solution. Compared with the pure AC electrode in the FCDI tests on NH4+ removal from synthetic wastewater, 25 wt % KTO addition in the electrode mixture increases the adsorption selectivity from 2.3 to 31 toward NH4+ over Na+, improves the NH4+ removal from 28.5% to 64.8% and increases the NH4+ desorption efficiency from 35.6% to over 80%, achieving selective NH4+ recovery and effective electrode regeneration. Based on DFT calculations, NH4+ adsorption on the K2Ti2O5 (0 0 1) surface is more thermodynamically favorable than that of Na+, which contributes to the high NH4+ adsorption selectivity observed.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.est.0c04383?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.est.0c04383</a>.Further information about the methods of KTO particles preparation, FCDI configuration and operation, electrochemical analysis, theoretical DFT calculation; detailed information on the characteristics of KTO, including SEM/TEM images, zeta-potential, BET, stability, selectivity, specific capacitance, and DFT results; the variation and distribution of cations during the FCDI tests; result of the static adsorption test; and influence of electrolyte salinity on the ammonium removal (<a class="ext-link" href="/doi/suppl/10.1021/acs.est.0c04383/suppl_file/es0c04383_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Enhanced NH 4 + Removal and Recovery from Wastewater Using Na-Zeolite-based Flow-Electrode Capacitive Deionization: Insight from Ion Transport Flux

Enhanced NH4+ Removal and Recovery from Wastewater Using Na-Zeolite-based Flow-Electrode Capacitive Deionization: Insight from Ion Transport Flux.

Enhancing selective NH4+ recovery from wastewater using modified zeolite-based flow electrode capacitive deionization

Enhanced Ammonium Removal and Recovery from Wastewater Using an Innovative Redox-Active Flow Electrode: the Significant Role of Redox Charge Compensation and Hydrogen Bond Network Reconstruction

Concurrent Nitrogen and Phosphorus Recovery Using Flow-Electrode Capacitive Deionization

Selective Ammonium Removal from Synthetic Wastewater by Flow-Electrode Capacitive Deionization Using a Novel K2Ti2O5-Activated Carbon Mixture Electrode.

Recovering Ammonia from Municipal Wastewater by Flow-Electrode Capacitive Deionization

Removal and Recovery of Ammonia from Wastewater using Ti$_3$C$_2$T$_x$ MXenes in Flow Electrode Capacitive Deionization

Capacitive deionization incorporating a fluidic MOF-CNT electrode for the high selective extraction of lithium

The optimized flow-electrode capacitive deionization (FCDI) performance by ZIF-8 derived nanoporous carbon polyhedron

Redox flow deionization using Prussian blue and functionalized ion exchange membrane for enhanced selective ion recovery

Selection and optimization of carbon-based electrode materials for flow-electrode capacitive deionization

Enhanced Charge Efficiency and Electrode Separation Utilizing Magnetic Carbon in Flow Electrode Capacitive Deionization

Enhanced Salt Removal Performance Using Graphene-Modified Sodium Vanadium Fluorophosphate in Flow Electrode Capacitive Deionization

Effective removal and selective capture of copper from salty solution in flow electrode capacitive deionization

A Novel Integrated Flow-Electrode Capacitive Deionization and Flow Cathode System for Nitrate Removal and Ammonia Generation from Simulated Groundwater.

Enhanced desalination performances by using porous polyaniline-activated carbon composite flow-electrodes in capacitive deionization system

Acid-free treatment of fiber-structured biocarbon material enhances flow capacitive deionization performance

Separation of nutrients and acetate from sewage sludge fermentation liquid in flow-electrode capacitive deionization system: Competitive mechanisms of ions and influence of activated carbon

Selective Ammonium Removal from Synthetic Wastewater by Flow-Electrode Capacitive Deionization Using a Novel K 2 Ti 2 O 5 -Activated Carbon Mixture Electrode

CNT/copper hexacyanoferrate: A superior Faradic electrode for ammonium ion removal with stable performance and high capacity