Abstract:In the laser powder bed fusion additive manufacturing of metals, extreme thermal conditions create many highly dynamic physical phenomena, such as vaporization and recoil, Marangoni convection, and protrusion and keyhole instability. Collectively, however, the full set of phenomena is too complicated for practical applications and, in reality, the melting modes are used as a guideline for printing. With an increasing local material temperature beyond the boiling point, the mode can change from conduction to keyhole. These mode designations ignore laser-matter interaction details but in many cases are adequate to determine the approximate microstructures, and hence the properties of the build. To date no consistent, common, and coherent definitions have been agreed upon because of historic limitations in melt pool and vapor depression morphology measurements. In this review, process-based definitions of different melting modes are distinguished from those based on postmortem evidence. The latter are derived mainly from the transverse cross sections of the fusion zone, whereas the former come directly from time-resolved x-ray imaging of melt pool and vapor depression morphologies. These process-based definitions are more strict and physically sound, and they offer new guidelines for laser additive manufacturing practices and create new research directions. The significance of the keyhole, which substantially enhances the laser energy absorption by the melt pool, is highlighted. Recent studies strongly suggest that stable-keyhole laser melting enables efficient, sustainable, and robust additive manufacturing. The realization of this scenario demands the development of multiphysics models, signal translations from morphology to other feasible signals, and in-process metrology across platforms and scales.

High frequency beam oscillation keyhole dynamics in laser melting revealed by in-situ x-ray imaging

Experimental Quantification of Inward Marangoni Convection and Its Impact on Keyhole Threshold in Laser Powder Bed Fusion of Stainless Steel

Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging

Effect of Laser-Matter Interaction on Molten Pool Flow and Keyhole Dynamics

Quantification of Interdependent Dynamics during Laser Additive Manufacturing Using X‐Ray Imaging Informed Multi‐Physics and Multiphase Simulation

Modulation of melt pool behaviour using novel laser beam oscillation methods

In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing

Dynamics of pore formation during laser powder bed fusion additive manufacturing

Harmonizing sound and light: X-ray imaging unveils acoustic signatures of stochastic inter-regime instabilities during laser melting

Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction

Investigation of Keyhole Behaviour and Its Impact on the Performance of Laser Beam Oscillating Welding Through Imaging and Acoustic Signal Analysis

Stability of molten pool and microstructure evolution of Ti-6Al-4V during laser powder bed fusion with a flat-top beam

The interplay between vapour, liquid, and solid phases in laser powder bed fusion

Observation of Vapor Plume Behavior and Process Stability at Single-Track and Multi-Track Levels in Laser Powder Bed Fusion Regime

In-situ High-Speed X-ray Imaging of Piezo-Driven Directed Energy Deposition Additive Manufacturing

Time-Resolved Geometric Feature Tracking Elucidates Laser-Induced Keyhole Dynamics

High-speed synchrotron X-ray imaging of melt pool dynamics during ultrasonic melt processing of Al6061

Laser Melting Modes in Metal Powder Bed Fusion Additive Manufacturing

Schlieren and X-Ray Imaging of Laser-Particle Interactions in Metal Additive Manufacturing

Machine learning–aided real-time detection of keyhole pore generation in laser powder bed fusion

Grain refinement and columnar-to-equiaxed transition of Ti6Al4V during additive manufacturing via different laser oscillations