Abstract:In this work, a ∼220 μm-thick heterogeneous remelted layer is achieved in the coarse-grained AZ41 Mg alloy by the laser surface remelting treatment. Microstructural evolution observations reveal that the remelted heterogeneous layer consists of gradient refined equiaxed α-Mg grains (average grain size from ∼4.6 μm in the bottom to ∼ 60 nm at the surface) and dispersed block-shaped nanoscaled β-Mg17Al12 precipitations (∼22.8 nm), which is obviously different from the favored coarse dendritic or cellular α-Mg grains and lamellar β precipitations during conventional laser processing. The formation of this remelted layer is attributed to constitutional supercooling caused by solute elements and the thermal undercooling generated by the high cooling rates based on optimized processing parameters and liquid nitrogen cooling. The heterogeneous nanostructured remelted layer makes the laser-treated sample has a high hardness of 1.51 GPa, a yield strength of 230.4 MPa and an ultimate tensile strength of 313.7 MPa with a good ductility (12.5%). The laser-treated samples also show the higher fatigue lifetimes in low-cycle as well as high-cycle fatigue tests, which are respectively 2.3 and 18.6 times higher than the original samples. In addition, the laser-treated specimen exhibits a 25% higher fatigue limit compared with the original sample. The synergistic strengthening mechanism including gradient grain refinement and dispersed nanoscaled precipitations are quantitatively discussed to improve strength-ductility synergy and strain hardening capacity in the laser-treated samples. This mechanism could effectively facilitate resisting the initiation and propagation of the fatigue microcracks, which was further validated by the in-situ transmission electron microscope observations. Our results in this study could be further applied for the modification of grain morphology and precipitation distribution for additive manufacturing applications, critical to the development of advanced structural Mg alloys with high service performance in practical engineering environments.

Microstructure, mechanical properties and fatigue crack growth behavior of an Al-Zn-Mg-Cu-Si-Zr-Er alloy fabricated by laser powder bed fusion

Microstructure and mechanical properties of Al-Mg-Mn-Er-Zr alloys fabricated by laser powder bed fusion

Fatigue characteristics of a newly developed laser powder bed fused scandium-free Al-Mg-Zr-Mn alloy

Evolution of multi-cellular structure on Zr and Er modified Al6Si1Mg alloy fabricated by laser powder bed fusion

Anisotropic tensile creep behavior in laser powder bed fusion manufactured Al–Mn–Mg–Sc–Zr alloy

Effective Control of Microstructure Evolution in AZ91D Magnesium Alloy by SiC Nanoparticles in Laser Powder-Bed Fusion

Microstructure and Mechanical Properties of an Er-Modified Al–Mg–Mn–Sc–Zr Alloy Processed by Selective Laser Melting

Heterogeneous microstructure and mechanical behaviour of Al-8.3Fe-1.3V-1.8Si alloy produced by laser powder bed fusion

Microstructural Evaluation and Tensile Properties of Al-Mg-Sc-Zr Alloys Prepared by LPBF

Achieving superior high-temperature mechanical properties in Al-Cu-Li-Sc-Zr alloy with nano-scale microstructure via laser additive manufacturing

Laser powder bed fusion of Zr-modified Al–Cu–Mg alloy: Crack-inhibiting, grain refinement, and mechanical properties

Effect of post-heat treatment on the microstructure, mechanical, and corrosion properties of laser powder bed fused Al–Zn–Mg–Cu–Si–Zr–Er alloys

Effect of 0.5 wt% Zr on defects, microstructure and mechanical properties of Al-3.6Zn-0.6Mg alloy fabricated by laser powder bed fusion

Microstructure characterization and mechanical properties of crack-free Al-Cu-Mg-Y alloy fabricated by laser powder bed fusion

Development of a high strength Zr/Sc/Hf-modified Al-Mn-Mg alloy using Laser Powder Bed Fusion: Design of a heterogeneous microstructure incorporating synergistic multiple strengthening mechanisms

Microstructures and tensile properties of a selective laser melted Al–Zn–Mg–Cu (Al7075) alloy by Si and Zr microalloying

Microstructural evolution modelling and low-stress fatigue performance of bimodal-structured Al-Mg-Sc-Zr alloy produced by laser powder bed fusion additive manufacturing

The microstructures and mechanical properties of Al-Zn-Mg-Cu-Si-Zr alloy: A comparison between directed energy deposition and laser powder bed fusion

Superior strength-ductility synergy and fatigue resistance of heterogeneous structured AZ41 Mg alloy by laser surface processing

Synergistic strengthening of crack-free Al–Zn–Mg–Cu alloys with hierarchical microstructures achieved via laser powder bed fusion

Microstructural Evolution of a High-Strength Zr-Ti-Modified 2139 Aluminum Alloy for Laser Powder Bed Fusion