Abstract:With the development of hydrogen fuel cell vehicles, the on-board hydrogen storage technology with safety, efficiency and economy has become a fundamental part. Low cost, light weight and good safety performance are required for the on-board hydrogen storage tanks. The composite high-pressure hydrogen storage tank has been recognized as an efficient solution that could address these problems. However, the complex working environment of hydrogen-thermo-mechanism presents challenge to the failure analysis and predictive model establishment of the composite hydrogen storage tanks. The crucial parameters or indicators for tank's failure analysis include burst pressure, damage state and fatigue lifetime, etc. So this paper gives a comprehensive review on the failure behavior analysis methods and prediction models of composite high-pressure hydrogen storage tanks from the literature. First, the failure analysis methods of composite high-pressure hydrogen storage tanks are summarized. Second, the latest literature regarding failure mode predictive methods and models of type III and type IV tanks are reviewed. The different failure criteria are compared and summarized, including some new failure criteria. These criteria enable failure analysis methods to obtain the interaction information on the interaction between the microscopic and macroscopic aspects of the composite. Damage evolution model and constitutive model are summarized. The post-initial failure behavior of the composite laminates structure is simulated by the material property degradation method (MPDM), especially the continuum damage mechanics (CDM) in conjunction with commercial finite element (FE) analysis method. The process of progressive failure analysis of composite tank is summarized as a reference for subsequent failure analysis. The future work of progressive failure analysis should focus on the initial failure of the composite material and microscopic failure mechanisms. The burst, fiber damage and fatigue life are the mainly investigated failure modes for type III composite hydrogen storage tank. For Type IV, the mainly researched failure modes are the collapse and blistering of the liner, burst and damage. The different finite element analysis methods and failure predictive models were classified and summarized. Further improvements were required for the simulation models of full-scale structure of the tank in the working environment or under the complex fiber winding modes. The liner of the type IV cylinder is completely distinct from that of the type III, therefore the behavior of collapse and blistering of the liner needs to be further investigated. The factors that affect collapse and blistering should be explored. The future research need focus on controlling these factors and monitoring the effects of these factors towards structural strength.

Ultimate pressure-bearing capacity of Type III onboard high-pressure hydrogen storage tanks under typical accident scenarios

Study on Burst Pressure of Type Ⅳ Hydrogen Storage Cylinder Based on Progressive Failure Analysis

Damage Assessment of Liquid Nitrogen Filling on Type III Cylinder in Cryo-Compressed Hydrogen Storage Cylinder

Numerical Study of Hydrogen Leakage and Explosion in Hydrogen Refueling Station with Large Volume Hydrogen Storage Vessels

Review on Hydrogen-Induced Failure of Rubber O-Rings for High Pressure Hydrogen Storage Tanks

Consequence Assessment of High-Pressure Hydrogen Storage Tank Rupture During Fire Test

Experimental Analysis on Residual Performance of Used 70 MPa Type IV Composite Pressure Vessels

Heat Transfer Analysis of High-Pressure Hydrogen Storage Tanks Subjected to Localized Fire

Safety discharge strategies of vehicle-mounted type III high-pressure hydrogen storage tanks under fire scenarios

Performance of Hydrogen Storage Tanks of Type IV in a Fire: Effect of the State of Charge

Design Fatigue Life Evaluation of High-Pressure Hydrogen Storage Vessels Based on Fracture Mechanics

Crack Growth Analysis Of High-Pressure Equipment For Hydrogen Storage

Experimental and Numerical Investigation of Localized Fire Test for High-Pressure Hydrogen Storage Tanks

Investigation on On-Board High-Pressure Composite Tanks Subjected to Localized and Engulfing Fire

A Literature Review of Failure Prediction and Analysis Methods for Composite High-Pressure Hydrogen Storage Tanks

Instability Analysis and Development of High Pressure Hydrogen Storage Vessels

Computational study of a high-pressure hydrogen storage tank explosion at different heights from the ground

A numerical study on the thermal behavior of high pressure hydrogen in the on-board storage cylinder

Experimental and numerical studies on the bonfire test of high-pressure hydrogen storage vessels

Numerical Study on Characteristics and Hazard Consequences of the Hydrogen Cloud Explosion in a Hydrogenation Unit

Effect of burst pressure and vented area on vented hydrogen explosions