Abstract:Ammonia (NH3) is a practical hydrogen vector for gas turbine power generation, but struggles to be deployed commercially due to many unresolved technical and fundamental challenges. This experimental investigation focuses on combustion of fuel blends representatives of various NH3 decomposition (or cracking) ratios in a combustor fitted with a swirl-stabilized burner, exploring pressures ranging from atmospheric to 10 bar. The study presents measurements of flame stability and emissions of NOx and N2O in combustor strategies relevant to both conventional single lean operation and staged with a rich primary zone, as a function of decomposition ratios (DR) and primary zone equivalence ratio. The findings reveal a notable pressure-dependency of nitrogen oxides (NOx) during combustion of ammonia containing fuels. For a fully decomposed mixture (H2 N2 at 75/25 %vol.), NOx emissions increase with increasing pressure. Conversely, when ammonia is present in the fuel, the trend reverses. However, the majority of NOx reduction occurs within a limited range of pressure increase and reaches a plateau thereafter. The transition at which the pressure effect declines depends on other factors, and was seen to occur between 5 and 9bar in the conditions of this study. Notably, NOx levels in flames containing NH3 are significantly higher, rendering the pressure sensitivity on NOx primarily governed by NH3 presence, irrespective of its concentration in the fuel (i.e. DR). Furthermore, the study reveals a non-monotonic relationship between NOx emissions and NH3 concentration in the fuel, peaking at mid-decomposition ratios. All factors tending to weaken flame stability (e.g. increasing fuel NH3 content, approaching lean/rich blow off limits, or increasing burner exit velocity) favour emissions of N2O emissions. As a general trend, it appears that longer residence times, increased pressure, and rich primary zone operation are all parameters limiting NOx formation from all partially decomposed blends of ammonia, but that they only positively add to a certain limit of a few hundred ppm. This NOx plateau level being higher at higher NH3 content in the fuel. Finally, the fuel obtained by perfectly decomposing ammonia appears to be the optimal fuel associating strong flame stability and low NOx propensity, even for the non fully premixed burner type of this study. Novelty and Significance Statement: This research compiles experimental data of NH3 H2 N2 blends under high pressure conditions, which are the first available in the range 5 to 10 bar. Experimental evidence of the beneficial effect of pressure on NOX has been shown earlier, but these are the first showing that this effect flattens out beyond 5 bar and combines with other operating factors, being therefore a valuable finding for assessing the potential of NOx emissions in gas turbine conditions. The study covers combustion modes in single and 2 stage (with rich primary zone) configurations and a variety of parametric variations. The study assesses the whole ammonia decomposition (cracking) range and highlights the combined effects of decomposition ratio and the other parameters investigated. Although there are many numerical studies on fundamental configurations with focus on kinetics with ammonia (flat flame, plug flow reactors, etc.), our results are obtained with a realistic burner configuration (swirl stabilized) at up to 100 kW power, giving the study an industrial relevance.

Ammonia-air combustion and explosion characteristics at elevated temperature and elevated pressure

Effect of Ammonia on Laminar Combustion Characteristics of Methane-Air Flames at Elevated Pressures.

Evolution of ammonia/air premixed flame and explosion pressure in a square closed duct: Effects of equivalence ratio and initial pressure

Experimental and numerical study of combustion characteristics of ammonia/ethanol mixture under high temperature and pressure

Flame evolution and pressure dynamics of premixed stoichiometric ammonia/hydrogen/air in a closed duct

Experimental study and kinetic analysis of the laminar burning velocity of NH3/syngas/air, NH3/CO/air and NH3/H2/air premixed flames at elevated pressures

Laminar burning velocity of Ammonia/Air mixtures at high pressures

Applying heat flux method to laminar burning velocity measurements of NH<sub>3</sub>/CH<sub>4</sub>/air at elevated pressures and kinetic modeling study

Measurement and scaling of turbulent burning velocity of ammonia/methane/air propagating spherical flames at elevated pressure

A numerical study of counterflow diffusion flames of methane/air at various pressures

Effects of nitrogen and argon on ammonia-oxygen explosion

Quantitative Analyses of No Formations from Different Reaction Pathways in Methane-Air Combustion at Various Pressures and Temperatures

Investigating the Laminar Burning Velocity of NH3/H2/air Using the Constant Volume Method: Experimental and Numerical Analysis

Exploration on laminar flame propagation of ammonia and syngas mixtures up to 10 atm

Experimental and numerical investigation of combustion characteristics of carbon-free NH3/H2 blends in N2O

Experimental study on the effect of pressure on single and two stage combustion of decomposed ammonia (NH3 H2 N2) blends over a swirl stabilized burner

The Temperature Dependence of the Laminar Burning Velocity and Superadiabatic Flame Temperature Phenomenon for NH3/air Flames

Unraveling Pressure Effects in Laminar Flame Propagation of Ammonia: A Comparative Study with Hydrogen, Methane, and Ammonia/Hydrogen

Study of the Explosive Behaviour of NH3/H2/air Mixtures

Temperature Dependence of Laminar Burning Velocity in Ammonia/Dimethyl Ether-air Premixed Flames

The effects of different equivalence ratios and initial pressures on the explosion of methane/air premixed gas in closed space