Abstract:Solid-state lithium batteries using solid polymer electrolytes can improve the safety and energy density of batteries. Smoother lithium-ion channels are necessary for solid polymer electrolytes with high ionic conductivity. The porosity and channel structure of the polymer film affect the transfer of lithium ions. However, their controllable synthesis remains a big challenge. Here, we developed a simple synthesis approach toward wrinkled microporous polymer electrolytes by combining the amphoteric (water solubility and organic solubility) polymer in three polymer blends. The homogeneous blend solution spontaneously wrinkled to vertical fold channels as the solvent evaporated. Two minor polymers, poly(vinyl pyrrolidone) (PVP) and polyetherimide (PEI), formed close stacks, and Janus PVP was dispersed in the poly(vinylidene fluoride) (PVDF) matrix. The interfacial tensions between the three polymers were different, so stress was produced when they solidified. The solvent was evaporated to the top layer of the polymers when the temperature increased. The bottom layer wrinkled owing to the stress during solidification. The evaporation of the solvent generated micropores to form the lithium-ion channel. They helped Li+ transference and created a wrinkled microporous PVDF-based polymer electrolyte, which achieved an ionic conductivity of 5.1 × 10–4 S cm–1 and a lithium-ion transference number of 0.51 at room temperature. Meanwhile, the good flame retardancy and tensile strength of the polymer electrolyte film can improve the safety of the battery. At 0.5C and room temperature, the batteries with a LiFePO4 cathode and the wrinkled microporous LiTFSI/PEI/PVP/PVDF electrolyte reached a high discharge specific capacity of 122.1 mAh g–1 at the 100th cycle with a Coulombic efficiency of above 99%. The results of tensile and self-extinguishing tests show that the polymer electrolyte film has good safety application prospects.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c11489.Experimental section and characterization. Figure S1: forcite dynamics temperature. Figure S2: forcite dynamics energies. Figure S3: gyration radius of the simulation. Figure S4: number of lithium ions transferred in the LiTFSI/PVP/PVDF polymer electrolyte. Figure S5: electrochemical stability window of the LiTFSI/PVP/PVDF polymer electrolyte. Figure S6: voltage–specific capacity curve of the first cycle of the Li∥LiTFSI/PEI/PVP/PVDF∥LiFePO4 battery. Figure S7: potential–specific capacity curve of the Li∥LiTFSI/PEI/PVP/PVDF∥Li2TiO3 battery at 0.5C. Figure S8: discharge capacity and efficiency cycle number curve of the Li∥LiTFSI/PEI/PVP/PVDF∥Li2TiO3 battery at 0.5C. Figure S9: TG curve of polymer electrolyte. Figure S10: DTG curve of polymer electrolyte. Table S1: comparison of the discharge specific capacity of the Lia∥LiTFSI/PEI/PVP/PVDFa∥LiFePO4 battery with the previously reported solid-state polymer electrolyte lithium metal batteries at different temperatures and rate capabilities (PDF)This article has not yet been cited by other publications.

High Salt-Content Plasticized Flame-Retardant Polymer Electrolytes

Design of Novel Types of Phosphorus-Containing Flame-Retardant Hybrid Solid Electrolytes with Enhanced Ionic Conductivities

Nonflammable, robust and flexible electrolytes enabled by phosphate coupled polymer-polymer for Li-metal batteries

A Novel Silicon/Phosphorus Co-Flame Retardant Polymer Electrolyte for High-Safety All-Solid-State Lithium Ion Batteries

Flame-retarding quasi-solid polymer electrolytes for high-safety lithium metal batteries

A Flame-Retardant Polymer Electrolyte for Safe and Long-Life Lithium Metal Battery

Fireproof Solid Polymer Electrolyte with Chemically Bonded Phosphorus Toward Stable and Safe Lithium‐Metal Battery

High-performance Nonflammable Gel Polymer Electrolyte with 3D Interpenetrating Network for Advanced Lithium-Ion Batteries

Nonflammable highly-fluorinated polymer electrolytes with enhanced interfacial compatibility for dendrite-free lithium metal batteries

Electrospinning Fiber Membrane‐Derived Gel Polymer Electrolytes with High Mechanical Strength and Low Swelling Effect for High‐Safety Lithium Metal Batteries

In-Situ gelled Polymer Electrolytes for Advanced Lithium Ion Batteries

Organic additive assisting with high ionic conduction and dendrite resistance of polymer electrolytes

Flame retardant polyurethane acrylate solid polymer electrolyte based on the synergistic effect of modified halloysite nanotubes for safe lithium batteries

Fire retardant, superionic solid state polymer electrolyte membranes for lithium ion batteries

Porous Polyamide Skeleton-Reinforced Solid-State Electrolyte: Enhanced Flexibility, Safety, and Electrochemical Performance

Improving Fast and Safe Transfer of Lithium Ions in Solid-State Lithium Batteries by Porosity and Channel Structure of Polymer Electrolyte

Strategies for Flame-Retardant Polymer Electrolytes for Safe Lithium-Based Batteries

Non-Flammable Polymer Electrolyte with Fast Ion Conductivity for High-Safety Li Batteries

Polybenzimidazole Functionalized Electrolyte with Li‐wetting and Self‐fluorination Functionalities for Practical Li Metal Batteries

Safety-enhanced Polymer Electrolytes with High Ambient-temperature Lithium-ion Conductivity Based on ABA Triblock Copolymers

Facile Fabrication of Polymer Electrolytes via Lithium Salt-Accelerated Thiol-Michael Addition for Lithium-Ion Batteries