Abstract:Scheme representing the synthesis of POT‐PVP/MgF/CS‐OXSWCNTs NCs as removal of acid red dye from aqueous solutions. In this study, a new hybrid material was created that exhibits excellent adsorption performance and high stability. POT‐PVP/MgF/CS‐OXSWCNTs NCs were synthesized using a three‐step approach. The process involved the chemical polymerization of poly(o‐toluidine)‐polyvinylpyrrolidone (POT‐PVP) with MgFe2O4 nanoparticles (MgF NPs) and chitosan‐oxidized single‐wall carbon nanotubes (CS‐OXSWCNTs). The synthesis process involved the use of an egg white method to synthesize MgF NPs and cross‐linking chitosan with OXSWCNTs using glutaraldehyde (GA) to obtain CS‐OXSWCNTs. The POT‐PVP copolymer was then used to coat MgF NPs and CS‐OXSWCNTs NCs. The successful synthesis of the NCs with strong component interaction was confirmed by several characterization techniques, including X‐ray diffraction spectroscopy (XRD), Fourier‐transform infrared spectroscopy (FTIR), and Raman spectroscopy. Microscopy analysis using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) verified that the POT‐PVP copolymer had properly coated the MgF NPs and CS‐OXSWCNTs NCs. The N2 adsorption–desorption isotherm verified that the specific surface area of NCs had increased with the addition of MgF NPs and CS‐OXSWCNTs NCs. Furthermore, the composite structure greatly improved the thermal stability of POT‐PVP/MgF/CS‐OXSWCNTs NCs. To evaluate how well the nanocomposites (NCs) eliminated pollutants, an artificially produced toxic effluent that contained acid red dye (A.R) was applied. To investigate their impact on dye removal, several parameters were changed, including pH, adsorbent dosage, time, temperature, and ionic strength. The POT‐PVP/MgF/CS‐OXSWCNTs NCs showed a higher removal rate based on a greater surface area, stability, and conducting power than MgF NPs and POT‐PVP. It was found that 25 mg L−1 and 7.5 mg were the optimal dye concentration and adsorbent dosage, respectively. The POT‐PVP/MgF/CS‐OXSWCNTs NCs achieved 99.46% removal efficiency at an acidic pH of 2. The NCs were found to have a maximum dye adsorption capacity of 107.4 mg g−1, and the adsorption process followed the pseudo‐second‐order kinetics. Thermodynamic analyses revealed that the dye adsorption onto POT‐PVP/MgF/CS‐OXSWCNTs NCs was endothermic, implying a spontaneous and physical adsorption mechanism. It can be inferred from these results that POT‐PVP/MgF/CS‐OXSWCNTs NCs are useful for eliminating dye pollutants from water.

Synthesis and characterization of alginate-polyacrylic acid/multiwalled carbon nanotubes composite with efficient removal for nigrosine dye

Optimization and Adsorption Behavior of Nanostructured NiFe2O4/Poly AMPS Grafted Biopolymer

Development of Elaeis guineensis/polyvinyl alcohol/carbon nanotube composites for efficient adsorption of dye: Experimental and theoretical approach

A New Solid Phase Extractor Based on Cross-linked PMMA@CNTs/GNP for the Removal of Crystal Violet and Methylene Blue Dyes

Decontamination of methylene blue from aqueous media using alginate‐bonded polyacrylamide/carbon black nanocomposite hydrogel

Development of new organic-inorganic, hybrid bionanocomposite from cellulose nanowhisker and Mg/Al-CO3-LDHfor enhanced dye removal

Sodium alginate-encapsulated nano-iron oxide coupled with copper-based MOFs (Cu-BTC@Alg/Fe3O4): Versatile composites for eco-friendly and effective elimination of Rhodamine B dye in wastewater purification

Amidoxime modified polymers of intrinsic microporosity/alginate composite hydrogel beads for efficient adsorption of cationic dyes from aqueous solution

Magnetic multi-walled carbon nanotubes-loaded alginate for treatment of industrial dye manufacturing effluent: adsorption modelling and process optimisation by central composite face-central design

Studying removal of anionic dye by prepared highly adsorbent surface hydrogel nanocomposite as an applicable for aqueous solution

Development of a novel bionanocomposite of UiO-66/xanthan gum/alginate crosslinked by calcium chloride for azo dye removal: Insight into adsorption kinetics, isotherms, and thermodynamics

Adsorption of different anionic and cationic dyes by hybrid nanocomposites of carbon nanotube and graphene materials over UiO-66

Investigate Performance of ATGF nanocomposite based on guar gum polymer for adsorption of Congo Red dye and alpha lipoic acid drug from wastewater: study kinetics and simulation

Synthesis of Alginate Capped Aluminum Oxide (Al2O3) Nanocomposite for Efficient Photocatalytic Degradation of Methylene Blue

Silver nanoparticle incorporated calcium crosslinked hydrogel composite for reduction of methylene blue dye and nitrite sensing

Removal of anionic and cationic dyes from wastewater by adsorption using multiwall carbon nanotubes

A nanocomposite based on polyaniline, nickel and manganese oxides for dye removal from aqueous solutions

Adsorption of anionic and cationic azo dyes from wastewater using novel and effective multicomponent adsorbent

Rice husk composite with polyaniline, sodium alginate and polypyrrole: naphthalene adsorption kinetics, equilibrium and thermodynamic studies

Poly(O‐Toluidine)‐polyvinylpyrrolidone copolymer submerged MgFe2O4/CS‐OXSWCNTs nanocomposite for removal of acid red dye from aqueous solutions

Eco-Friendly Carbon Nanotubes Reinforced with Sodium Alginate/Polyacrylic Acid for Enhanced Adsorption of Copper Ions: Kinetics, Isotherm, and Mechanism Adsorption Studies