Abstract:There is high interest in the recovery of phosphorus (P) from wastewater through crystallization processes. However, the addition of chemical reagents (e.g., sodium hydroxide) to raise the pH may result in high treatment costs and increased concentrations of undesired metal ions (e.g., sodium). As an alternative, in this research we considered electrochemical mediated precipitation at low current densities (0.4-1.2 A m-2) without using chemical reagents. For that purpose, a two-chamber electrochemical system was operated in batch for treating denitrified swine effluent (48 mg P L-1). By applying current at 1.2 A m-2, and targeting pH 11.5, a maximum P removal rate of 33.4 mmol P (L·d-1) was obtained while the P removal efficiency was above 90 %. New solids that formed mostly remained suspended in the catholyte. Before discharge, the catholyte effluent was recirculated to the anodic compartment to neutralize the pH, achieving a final pH of 6.4 ± 0.1. Chlorine (Cl2) production in the anodic compartment was favored by a small anode surface and a high initial pH of the catholyte. Although the production of chlorine achieved was limited (the highest concentration was 8.6 ± 0.1 mg Cl2 L-1) these findings represent a new opportunity for the recovery and onsite use of this side-product. Electrochemical impedance spectroscopy tests confirmed that the deposition of solids inside the cathodic compartment during the experimental period was limited. Membrane analysis revealed significant scaling of carbonate compounds. The electrochemical treatment described above was shown as a promising alternative to sodium hydroxide and sulfuric acid dosage for pH adjustment when crystallizing phosphate salts.

Phosphate-Based Dechlorination of Electrorefiner Salt Waste using a Phosphoric Acid Precursor

Feasibility of Direct Disposal of Salt Waste from Electochemical Processing of Spent Nuclear Fuel

Electrochemical de-chlorination/transformation of metal chloride for the preparation of NZP structure product

Electrochemical purification of waste salt from pyro-processing of spent nuclear fuels

Dechlorination of molten chloride waste salt from electrorefining via ion-exchange using pelletized ultra-stable H-Y zeolite in a fluidized particle reactor

Reactive-crystallization method for purification of LiCl salt waste

Recovering precipitates from dechlorination process of saline wastewater as poly aluminum chloride

Hydrophilic Chelators for Aqueous Reprocessing of Spent Nuclear Fuel

Synergy of phosphate recovery from sludge-incinerated ash and coagulant production by desalinated brine

Different methods to synthesize sodalite, as a matrix for conditioning chloride spent salts from pyroprocesses

Salt clean-up for recycling by electrolysis with a cathode-perforated ceramic container assembly

Phosphate Recovery from Human Waste via the Formation of Hydroxyapatite during Electrochemical Wastewater Treatment

Removal and recovery of phosphorus and fluorine in process water from water based direct physical lithium-ion battery recycling

In Situ Chlorine Generation and Rare Earth Chlorination by Molten Salt Electrolysis

Benchtop Zone Refinement of Simulated Future Spent Nuclear Fuel Pyroprocessing Waste

Electrochemical Dechlorination of Municipal Wastewater Effluent

Elimination of Phosphorus from Waste Water by Crystallization

Electrochemical Recovery of Phosphorus from Simulated and Real Wastewater: Effect of Investigational Conditions on the Process Efficiency

Reagent-free phosphorus precipitation from a denitrified swine effluent in a batch electrochemical system

Stabilization/solidification of radioactive salt waste by using xSiO2-yAl2O3-zP2O5 (SAP) material at molten salt state

Synergistic promotion of low-temperature pyrolysis and chloride complexation in waste salt purification process