Abstract:Real-time and accurate measurement of the uniaxial compressive strength of rock on-site is the foundation of the design optimization and digital construction of the support structure in an underground project. Currently, effective methods to obtain the rock uniaxial compressive strength Rc in real-time on-site are scarce. Digital drilling test technology provides a new opportunity to solve this problem; however, the lack of a universal relational model for the drilling parameters versus Rc constrains further development of this technology. In this study, based on developed PDC bit for probing, the Sc parameters of rock cutting strength are proposed, and the relational equation between Sc and drilling parameters is deduced. Using an in-house-developed rock drilling test system, laboratory digital drilling tests for sandstone and mortar specimens with various strengths are performed. Based on the test results, a relational equation between Rc and Sc is developed. Subsequently, a relational model for drilling parameters versus Rc (the DP-Rc model) is developed, and its effectiveness is verified. The results show that the average difference in the uniaxial compressive strength predicted by the DP-Rc model versus the Rc measured in the uniaxial test is less than 10%, which proves the effectiveness of this model. On this basis, we propose a digital drilling test–based rock uniaxial compressive strength real-time measurement method that provides the foundation for the real-time and accurate measurement of the uniaxial compressive strength of the surrounding rock in underground projects.

Determining Method of Tensile Strength of Rock Based on Friction Characteristics in the Drilling Process

Accurate determination of drilling parameters in time series for estimate of rock strengths

Estimation of mechanics parameters of rock in consideration of confining pressure using monitoring while drilling data

Comparison of machine learning and statistical approaches to estimate rock tensile strength

Relationship model for the drilling parameters from a digital drilling rig versus the rock mechanical parameters and its application

Friction Coefficients Calculation via Surface Roughness Characterization for Tight Sedimentary Rocks

A New Method for Predicting Residual Strength of Rock in Water Diversion Tunnel Using Drilling Process Monitoring

Drilling Process Monitoring for Predicting Mechanical Properties of Jointed Rock Mass: A Review

Strength prediction and drillability identification for rock based on measurement while drilling parameters

A Method for Estimating the Mechanical Parameters of the Laminae of Laminated Rocks Based On Uniaxial Compression and Tensile Tests

An alternative method for predicting internal friction angle of rock materials

Evaluating the Anisotropy of Drilling Mechanical Characteristics of Rock in the Process of Digital Drilling

Correlation between the tensile to compressive strength ratio and mechanical parameters of rock based on a nonlinear M-C criterion

Performance analysis of drilling machines based on rock properties and machine's specifications

An experimental investigation into the borehole drilling and strata characteristics

A New Perspective on the Constant Mi of the Hoek–Brown Failure Criterion and a New Model for Determining the Residual Strength of Rock

Rock fracture identification with measurement while drilling data in down-the-hole drills

Rock Strength Determination Based on Rock Drillability Index and Drilling Specific Energy: Numerical Simulation Using Discrete Element Method

Theoretical Model for the Shear Strength of Rock Discontinuities with Non-Associated Flow Laws

Study on a digital drilling test–based rock uniaxial compressive strength measurement method

The response mechanism and testing method of the rock elastic modulus while drilling