Abstract:In this work, the most efficient and common engineered surface treatments identified as shot peening (SP), laser shock peening (LSP) and ultrasonic surface rolling process (USRP) were utilized to impact the 300 M ultrahigh strength steel. The microstructure evolution and surface strengthening behavior were carefully characterized and compared for the 300 M steel with various treatments. Besides, the underlying mechanisms for difference in grain refinement and surface mechanical properties by the arranged surface modification are revealed. The results indicate that a gradient structure with nano-grains at the top surface appears on the SP, LSP and USRP treated samples. The process of repeated impacts of SP in different directions leads to activation of multiple slip systems, which thus causes severe refined grains and dense dislocation activities associated with dislocation tangles, dislocation walls and blocking. A great variety of strikes per unit area by USRP results in higher plastic deformation compared to SP where numerous dislocation cells and deformation bands were generated. In contrast to SP and USRP, fewer slip systems are activated in LSP due to the short duration time which thus leads to the thinnest refined grain layer and more planar dislocation structures. The combination of low plastic work and lack of refined grains leads to lowest full width at half maximum (FWHM) in case of LSP samples whereas high FWHM comes from both fine grain size and dislocations in SP. The grain refinement and plastic work contributes to an increase of microhardness and compressive residual stress for the SP, LSP and USRP samples. To be clear, SP leads to a higher magnitude of hardness and compressive residual stress on the topmost surface while LSP causes a larger depth due to that shock wave in LSP influences material to much greater depth. Besides, the decomposition and redistribution of carbides are also noticed on the surface layer after the surface treatments with very high strain rate where numerous dislocations accumulate at the border of the carbides and slip trace is also observed within the carbides.

Enhancing Erosion Behavior of 304SS Treated by Ultrasonic Surface Rolling Extrusion Technique

Effects of ultrasonic surface rolling process on tribological behavior of 4Cr13 stainless steel

Anti-Fouling Behaviors of a Modified Surface Induced by an Ultrasonic Surface Rolling Process for 304 Stainless Steel

Assessing the tribo-corrosion resistance of surface nanostructured stainless-steel

Enhanced Fatigue Performance and Surface Mechanical Properties of AISI 304 Stainless Steel Induced by Electropulsing-Assisted Ultrasonic Surface Rolling Process

Recent Progress in Ultrasonic Surface Rolling: A Comprehensive Overview

Altered microstructure characteristics and enhanced corrosion resistance of UNS S32750 duplex stainless steel via ultrasonic surface rolling process

Ultrasonic Rolling Strengthening of TC11 Titanium Alloy Surface: Corrosion and Wear Properties under Extreme Conditions

Microstructure evolution and surface strengthening behavior of 300 M ultrahigh strength steel under engineered surface treatments

Enhanced Corrosion Behavior and Mechanical Properties of Al-Zn-Mg-Cu Sheet Alloy by Ultrasonic Surface Rolling Treatment

Effect of Electropulsing on Surface Mechanical Properties and Microstructure of Aisi 304 Stainless Steel During Ultrasonic Surface Rolling Process

Effects of Ultrasonic Surface Rolling on the Localized Corrosion Behavior of 7B50-T7751 Aluminum Alloy

Surface Properties of Additively Manufactured 316L Steel Subjected to Ultrasonic Rolling

Improving corrosion resistance of selective laser melted 316L stainless steel through ultrasonic severe surface rolling

Achieving excellent corrosion resistance properties of 7075 Al alloy via ultrasonic surface rolling treatment

Effect of corrosion on the fatigue damage behavior of M50 steel treated by ultrasonic surface rolling process

Low strain hardening enables improved water droplet erosion performance through deep rolling

Simultaneously improving mechanical properties and corrosion resistance of as-cast AZ91 Mg alloy by ultrasonic surface rolling

Reconstruction Mechanism of Surface Integrity for Laser Additive Manufactured 316 L Stainless Steel Subjected to Ultrasonic Surface Rolling Process: Numerical Simulation and Experimental Verification

Investigation on the Evolution of Residual Stress in Ultrasonic Surface Rolling Treatment-Processed 18CrNiMo7-6 Alloy Steel

Errosion-Corrosion Critical Performance of Surface Nanocrystalline 20 Carbon Steel in Condensate Water