Abstract:All-solid-state batteries have become the most potential next-generation energy-storage devices. However, it is quite difficult to simultaneously achieve a single solid-state electrolytes (SSEs) layer with both dendrite-free Li metal plating and low interfacial resistance between the cathode and SSEs. Herein, an integrated structure of cathode and double-layer solid electrolyte membrane (IS-CDL) is designed, which greatly improves the interfacial contact and suppresses the Li dendrite growth. The first "polymer in ceramic" solid electrolyte layer (SL1) consists of 80 wt % Li1.4Al0.4Ti1.6(PO4)3 (LATP) nanoparticles and 20 wt % polyethylene oxide (PEO), and the second polymer electrolyte layer is PEO-based solid electrolyte layer (SL2). The SL1 with high mechanical properties can hinder the growth of Li dendrites and reduce the interfacial resistance with the cathode. The SL2 can inhibit the side reaction between the Li metal and LATP. The Li symmetric cells with sandwich-type hierarchical electrolyte (SL2/SL1/SL2) can stably cycle over 3200 h at 0.1 mA cm–2 at 45 °C. The obtained all-solid-state LiFePO4–IS-CDL/Li batteries present a capacity of 142.6 mA h g–1 at 45 °C with the capacity retention of 91.7% after 100 cycles, and all-solid-state NCM811–IS-CDL/Li batteries deliver a specific capacity of 175.5 mA h g–1 at 60 °C. This work proposes an effective strategy to fabricate all-solid-state lithium batteries with high electrochemical performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c16390?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c16390</a>.Preparation of high mass loading cathode; SEM image of pristine LATP nanoparticles; optical images of the solid electrolyte membrane; EIS spectra of Li/LFP–IS–CSL1 cells and Li/LFP–IS–CDL cells; impedance spectra of solid electrolyte membranes; digital photographs of the lithium metal surface; charge and discharge curves; voltage profile of a symmetric cell; and cycling performances, EIS spectra, and charge–discharge voltage profiles of NCM811 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16390/suppl_file/am0c16390_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Realization of High-Performance Room Temperature Solid State Li-Metal Batteries using LiF/PVDF-HFP Composite Membrane Protecting LATP Ceramic Electrolyte

Aqueous Tape Casting Phosphate Ceramic Electrolyte Membrane for High Performance All Solid-State Lithium Metal Battery

Stabilizing Solid Electrolyte/Li Interface Via Polymer-in-Salt Artificial Protection Layer for High-Rate and Stable Lithium Metal Batteries

Composite Polymer Electrolytes Based on PVA/PAN for All-Solid-State Lithium Metal Batteries Operated at Room Temperature

Building a Highly Functional Li1.3Al0.3Ti1.7(PO4)3/poly (vinylidene Fluoride) Composite Electrolyte for All-Solid-state Lithium Batteries

Asymmetric Solid-State Lithium-Metal-Battery Electrolytes Featuring Na Superionic Conductor-Type Ceramic and Garnet-Type Ceramic Filled Composite Polymer

Integrated Design of a Functional Composite Electrolyte and Cathode for All-Solid-State Li Metal Batteries

Double-Layered Multifunctional Composite Electrolytes for High-Voltage Solid-State Lithium-Metal Batteries

Localized High Concentration Polymer Electrolyte Enabling Room Temperature Solid-State Lithium Metal Batteries with Stable LiF-rich Interphases

In Situ Gelation of a 1,3-Dioxolane Dual-Permeable Porous Tandem Framework with Excellent Interfacial Stability to Power Long-Cycling Solid-State Lithium Metal Batteries

Interface engineering of Li<sub>1.3</sub>Al<sub>0.3</sub>Ti<sub>1.7</sub>(PO<sub>4</sub>)<sub>3</ sub> ceramic electrolyte via multifunctional interfacial layer for all-solid-state lithium batteries

LATP-coated LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode with Compatible Interface with Ultrathin PVDF-reinforced PEO-LLZTO Electrolyte for Stable Solidstate Lithium Batteries

Integrated Structure of Cathode and Double-Layer Electrolyte for Highly Stable and Dendrite-Free All-Solid-State Li-Metal Batteries

Composite polymer electrolyte based on poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) for solid-state batteries

Construction of Polyvinylidene Fluoride Buffer Layers for Li1.3Al0.3Ti1.7(PO4)(3) Solid-State Electrolytes toward Stable Dendrite-Free Lithium Metal Batteries

LATP-coated LiNi0.8Co0.1Mn0.1O2 cathode with compatible interface with ultrathin PVDF-reinforced PEO-LLZTO electrolyte for stable solid-state lithium batteries

High-Performance Solid-State Lithium Metal Batteries of Garnet/Polymer Composite Thin-Film Electrolyte with Domain-Limited Ion Transport Pathways.

Double-Protected Layers with Solid-Liquid Hybrid Electrolytes for Long-Cycle-Life Lithium Batteries.

Highly Stable Quasi‐Solid‐State Lithium Metal Batteries: Reinforced Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 /Li Interface by a Protection Interlayer

Unleashing the Potential of Li-Metal Batteries A Breakthrough Ultra-High Room-Temperature Ionic Conductivity Composite Solid-State Electrolyte

A flexible composite solid electrolyte with a highly stable interphase for dendrite-free and durable all-solid-state lithium metal batteries