Abstract:Copper-containing sludge is a common by-product of industrial activities, particularly electroplating and metal processing. This type of sludge contains high concentrations of heavy metals such as copper, which can pose a potential threat to the environment. Therefore, its treatment and disposal require special attention. Due to its efficient mass and heat transfer characteristics, the suspended state technology has shown significant potential for application in a number of key processes, including the drying, decomposition, and reduction of copper-containing sludge. This paper presents an in-depth analysis of the current status of the application of the suspended state technology in the treatment of copper-containing sludge. Based on this analysis, a device for the treatment of copper-containing sludge in the suspended state was designed, through which the characteristics of copper-containing sludge in the oxidative decomposition and reduction phases are investigated. The research objects were gas concentration, temperature, contact state, and particle size time. Orthogonal experiments were initially employed to investigate the relationship between the influencing factors and the conversion rate of copper oxides. This was followed by a single-factor influence study, which led to the determination of the optimal process parameters for the decomposition experiments of the Cu-containing sludge in an oxidizing atmosphere. The 100 μm Cu-containing sludge was reacted with 10% O2 gas at a flow rate of 1 m/s for 3 min under the condition of 900 °C. The process parameters were then determined as follows: The research objects were gas concentration, temperature, contact state, and particle size time. Orthogonal experiments were employed to investigate the relationship between the influencing factors and the copper conversion rate. This was followed by a single-factor influence study, which determined the optimal process parameters for the copper-containing sludge reduction experiments. The 200 μm copper-containing sludge was reacted for 5 min at a flow rate of 7% carbon monoxide at a flow rate of 1.5 m/s under the condition of 800 °C.

High-efficiency recycling of copper-cadmium slag by ozonation with ultrasonic catalysis

Mechanism and kinetics analysis of valuable metals leaching from copper-cadmium slag assisted by ultrasound cavitation

Highly Efficient Degradation of Pharmaceutical Sludge by Catalytic Wet Oxidation Using CuO-CeO2/γ-Al2O3 As a Catalyst

Co-extraction of vanadium and chromium from vanadium-chromium–bearing reducing slag via oxygen microbubbles intensified copper oxide catalytic oxidation method in alkaline solutions

Efficient recovery of zinc and copper from copper smelting slag (CSS) by cooperative modification with a composite medium of FeS-O2

An efficient approach to utilize copper smelting slag: Separating nonferrous metals and reducing iron oxide at high temperature

Energy conservation and emission reduction through utilization of latent heat of copper slag for iron and copper recovery

Efficient Recycling of Valuable Metals from Waste Copper Slag by Using Secondary Aluminum Dross as a Novel Reductant

Stepwise Utilization Process to Recover Valuable Components from Copper Slag

Study on ultrasonic enhanced ozone oxidation of cyanide-containing wastewater

A green method to clean copper slag and rapidly recover copper resources via reduction-sulfurizing smelting and super-gravity separation at low temperature

Research on Resource Recovery and Disposal of Copper-Containing Sludge

Advances in Recovery of Valuable Metals and Waste Heat from Copper Slag

Synergetic modification of industrial basic oxygen furnace slag and copper slag for efficient iron recovery

Treating waste with waste: Metals recovery from electroplating sludge using spent cathode carbon combustion dust and copper refining slag

Novel Strategy for Efficient Recovery of CuO-Based Multiple-Metals from Copper Smelter Dust toward CO2 Electrocatalytic Reduction

A review of metallurgical slags as catalysts in advanced oxidation processes for removal of refractory organic pollutants in wastewater

Iron and copper recovery from copper slags through smelting with waste cathode carbon from aluminium electrolysis

Recovery of Valuable Metals from Copper Slag by Hydrometallurgy

Leaching kinetics of copper and valuable metal extraction from copper-cadmium residues of zinc hydrometallurgy by oxidation acid leaching

Recovery of valuable metals from copper slag