Abstract:Abstract The contamination of water resources by heavy metals (HMs), mainly introduced by anthropogenic resources, has been considered as a serious environmental issue in the recent era. Therefore, the conventional methods for heavy metal removal have various drawbacks in terms of cost, toxicity, and efficiency. The novel study investigated the biosorption intensity of raw and chemically modified sawdust (SD) and corn husk (CH) to eliminate chromium (III) from the aqueous solutions. SD and CH were used as biosorbents and were treated chemically with sulfuric acid (H2SO4), sodium hydroxide (NaOH), and detergent powder. The biosorption potential was estimated based on percentage removal efficiency (% RE) of chromium (III) and the adsorption intensity (qmax). The characterization of surface morphology and functional groups of biosorbents was studied by SEM and FTIR. Moreover, the adsorption isotherm models (Langmuir and Freundlich), kinetic models (pseudo-first-order kinetics and pseudo-second-order kinetics), and thermodynamic parameters (ΔG°, ΔH°, and ΔS°) were also assessed to predict the biosorption process. The results of % RE revealed that detergent-treated SD (DTSD) and detergent-treated CH (DTCH) showed highest % RE of 9.27 ± 0.15 (%) and 99.16 ± 0.08 (%) for elimination of chromium (III), respectively. Similarly, base-treated SD (BTSD) and base-treated CH (BTCH) exhibited 95.53 ± 0.18 (%) and 92.43 ± 0.22 (%) of % RE compared with 77.87 ± 1.64 (%) and 81.96 ± 0.34 (%) removal efficiency of acid-treated SD (ATSD) and acid-treated CH (ATCH), respectively. The raw SD (RSD) and raw CH (RCH) showed lower % RE of 23.68 ± 1.52 (%) and 35.52 ± 4.74 (%) for Cr (III) removal. Further, the porosity on the biosorbent's surface and attached functional groups increased after chemical treatment and this variation resulted in increased removal efficiency after chemical treatments. The Langmuir isotherm model and the Freundlich isotherm model were employed to predict the biosorption process, and both these models are best-fitted. The pseudo-second-order kinetic model was promising representative of the biosorption data. The process was endothermic and the parameters indicated that Cr (III) biosorbtion was thermodynamically favorable. Therefore, the obtained results highlighted that detergent-treatment enhanced the % RE, and DTSD and DTCH are highly efficient biosorbents for eliminating Cr (III) from aqueous solutions. Thus, detergent-treated biosorbents are proved to be a promising sustainable, eco-friendly, and cost-effective way to treat HMs from aqueous solutions as they utilize natural agriculture waste products and also handle issues related to excessive solid waste management.

A Comprehensive Review of the Current Progress of Chromium Removal Methods from Aqueous Solution

The Efficient Removal of Low Concentration Hexavalent Chromium Via Combining Charged Microporous Membrane and Micellar Adsorption Filtration

Removal of Chromium Species by Adsorption: Fundamental Principles, Newly Developed Adsorbents and Future Perspectives

Enhancing chromium removal and recovery from industrial wastewater using sustainable and efficient nanomaterial: A review

A comprehensive review on chromium chemistry along with detection, speciation, extraction and remediation of hexavalent chromium in contemporary science and technology

A Comprehensive Review of Lab-Scale Studies on Removing Hexavalent Chromium from Aqueous Solutions by Using Unmodified and Modified Waste Biomass as Adsorbents

Removal of Recalcitrant Trivalent Chromium Complexes from Industrial Wastewater under Strict Discharge Standards

Removal of chromium from wastewater by membrane filtration, chemical precipitation, ion exchange, adsorption electrocoagulation, electrochemical reduction, electrodialysis, electrodeionization, photocatalysis and nanotechnology: a review

A review of the treatment technologies for hexavalent chromium contaminated water

A review of novel green adsorbents as a sustainable alternative for the remediation of chromium (VI) from water environments

Assessing Physicochemical Technologies for Removing Hexavalent Chromium from Contaminated Waters—an Overview and Future Research Directions

Alleviation of hexavalent chromium by using microorganisms: insight into the strategies and complications

Hexavalent Chromium Removal from Water and Wastewaters by Electrochemical Processes: Review

Removal of Cr (III) from wastewater by using raw and chemically modified sawdust and corn husk

Water contamination due to hexavalent chromium and its health impacts: exploring green technology for Cr (VI) remediation

Recent advances in enhanced technology of Cr(VI) bioreduction in aqueous condition: A review

Efficient removal of chromate from wastewater using a one-pot synthesis of chitosan cross-linked ceria incorporated hydrous copper oxide bio-polymeric composite

Successive use of microorganisms to remove chromium from wastewater

Adsorptive removal of Cr(VI) from aqueous solution: kinetic, isotherm, thermodynamics, toxicity, scale-up design, and GA modeling

Efficient Cr(III) removal from effluent using functionalized Ficus benghalensis and Bambusa vulgaris bio-adsorbents

Cleaning chromium pollution in aquatic environments by bioremediation, photocatalytic remediation, electrochemical remediation and coupled remediation systems