Abstract:In the current research, strong strain-hardening capability in 1045 carbon steel was achieved by cold rolling and heat treatment of the lamellar structure. After 60% cold rolling, the proeutectoid ferrite and pearlite were severely elongated along the rolling direction. Cementite layers with brittle nature were fragmented under the action of stress and also by shear band formation during rolling. The lamellar heterogeneous microstructure of the heat-treated samples was formed by the proeutectoid ferrite as the soft domain and the pearlite as the hard domain. Increasing the heat treatment duration promoted the spheroidization transformation of cementite, and the spheroidization degree of cementite increased. With the increase in the time of heat treatment, the number of recrystallized grains is increased. Heat treatment led to weakening the deformation texture (⟨100⟩‖ND or θ fiber) and strengthening the recrystallization texture (⟨110⟩‖ND or ζ fiber). The heat-treated steels revealed an average microhardness value much higher than its macrohardness due to changes in the texture of ferrite grains. Heat treatment decreased the strength and hardness, and increased the ductility and toughness of steel compared to the cold-rolled sample owing to the annihilation of dislocations and the strengthening transition from strain hardening to grain refinement. The heat-treated samples exhibited a wider range of uniform plastic deformation and a larger strain hardening rate than the cold-rolled sample owing to the occurrence of the recovery of strain hardening rate phenomenon. The appropriate collocation of the fine spherical cementite and the soft/hard domains (with a large difference in mechanical properties) was beneficial to obtaining excellent strength-ductility balance in plain medium carbon steel. After heat treatment, the extent of ductile fracture considerably increased. With increasing the time of heat treatment from 1 to 3 h, the number of lamellar dimples decreased owing to the creation of more fine spherical cementite.

Effects of Heat Treatment on the Mechanical Properties of Rolled Medium Carbon Steel

Studies of the properties of heat treated rolled medium carbon steel

The effect of heat treatment on the hardness and impact properties of medium carbon steel

Effect of Heat Treatment on Low Carbon Steel: An Experimental Investigation

Effect of Heat Treatment Parameters on Mechanical Properties of Medium Carbon Steel

Effects of Heat Treatment Process on Microstructure and Mechanical Properties for Extra-Thick High-Strength Steel Plate

Effect of Heat Treatment on Phase Transformation Texture and Mechanical Properties in Hot-Rolled High-Strength Steels

Investigation on the Interrelationship between the Chemical Composition, Heat Treatment Parameters and the Phase Transformation Process, Microstructure Evolution and the Mechanical Properties of Austempered Steel

Impact of Cold-Rolling and Heat Treatment on Mechanical Properties of Dual-Phase Treated Low Carbon Steel

The effect of heat treatment on high temperature mechanical properties of microalloyed medium carbon steel

The Microstructure and Mechanical Properties of Ferritic-Martensitic Steel EP-823 after High-Temperature Thermomechanical Treatment

Strong strain-hardening capability in plain carbon steel through cold rolling and heat treatment of lamellar structure

Microstructural Evolution and Mechanical Properties of 6cr13 Martensitic Stainless Steel Subjected to Cold Rolling and Heat Treatments

Investigations on Heat Treatment of a High-Speed Steel Roll

Effects of Heat Treatment on Microstructure and Mechanical Properties of 11Cr3W3Co Ferrite/Martensite Steel

Effect of heat treatment on mechanical properties of 1500MPa high strength wear-resistant steel

Heat Treatment of High Manganese Austenitic Steel: Structural and Mechanical Properties

The Influence of Multi-Pass Hot Rolling Parameters and Subsequent Heat Treatment on Microstructure and Mechanical Properties of Medium-Carbon Steel

Effect of Isothermal Heat Treatment on Microstructure and Mechanical Properties of a Medium-Carbon Ultra High Strength Spring Steel

Effect of Heat Treatment on the Microstructure and Mechanical Properties of Hot-Rolled Plate from Duplex Stainless Steel 2205

Effect of Heat Treatment on Structure and Properties of B Alloyed High Speed Steel for Rolling Mill Rolls